Philips Trilogy 100 User manual

Overview
Quick start guide
1
Proximal
pressure
line
Exhalation
valve line
1
2
3
4
Overview
Trilogy100
Circuit set-up
Set-up screen
Prescription set-up
Removable
air pathway
Remote
alarm
connector
Serial connector – to
connect to a computer or
Alice polysomnographs
Ethernet
connector
External
battery
connector
Air inlet and grey
foam filter
Detachable
battery
Oxygen valve port
(flow source up to
15 LP )
Exit
cm
H2O
Primary: S/T AVAPS
0 5 10 15 20 25 30
Select
Navigate
24/04/2007
04:53 PM
Cancel action or exit menu
Navigate menus or change settings
Select/modify/confirm parameters
Audio pause button
Start/stop button
AC power inlet
SD card to download ventilation data
7
6
5
4
3
2
1
Prescriber environment, full access mode
SD card inserted in the ventilator
Audio pause active
Ramp active
Status of detachable battery
Status of internal battery
Status of external battery
Battery is charging
Symbols and icons
© 2009 Koninklijke Philips Electronics N.V. All rights are reserved.
Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any
product at any time without notice or obligation and will not be liable for any consequences
resulting from the use of this publication.
Geyer W B 1/19/09 CI 4102101 PN 1059349
Philips Healthca e is pa t of
Royal Philips Elect onics
How to reach us
www.philips.com/healthcare
healthcar[email protected]
fax: [phone]
Asia
[phone]
Europe, iddle East,Africa
[phone]
Latin America
[phone]
North America
[phone]
800 285 5585 (toll free, US only)
Philips Respironics
1010 urry Ridge Lane
urrysville, PA 15668
Customer Service
724 387 4000
800 345 6443 (toll free)
Respironics Europe,Africa, iddle East
[phone]
www.philips.com/respironics
7
12 3
5
6
4
Set-up with exhalation valve Set-up with exhalation port
Circuit set-up
2
Proximal
pressure line
Exhalation
valve line
Flexible
tubing
Tracheostomy
tubing
Proximal
pressure port
Tee connector Exhalation valve
Mask without
integrated leak
Bacterial/ viral filter
(optional)
Flexible
tubing
Whisper
Swivel II
(exhalation
port)
Whisper
Swivel II
(exhalation
port)
Mask with
integrated leak
Mask without
integrated leak
Tracheostomy
tubing
Bacterial/ viral filter
(optional)
Please check that ci cuit type is p ope ly configu ed.
Before operating Trilogy100, you need to configure the circuit type.
To change the
porting block Proximal pressure line
Exhalation valve line
Respironics,Trilogy,Whisper Swivel, and Alice are trademarks of Respironics, Inc. and its affiliates.

Overview
Quick start guide
1
Proximal
pressure
line
Exhalation
valve line
1
2
3
4
Overview
Trilogy100
Circuit set-up
Set-up screen
Prescription set-up
Removable
air pathway
Remote
alarm
connector
Serial connector – to
connect to a computer or
Alice polysomnographs
Ethernet
connector
External
battery
connector
Air inlet and grey
foam filter
Detachable
battery
Oxygen valve port
(flow source up to
15 LP )
Exit
cm
H2O
Primary: S/T AVAPS
0 5 10 15 20 25 30
Select
Navigate
24/04/2007
04:53 PM
Cancel action or exit menu
Navigate menus or change settings
Select/modify/confirm parameters
Audio pause button
Start/stop button
AC power inlet
SD card to download ventilation data
7
6
5
4
3
2
1
Prescriber environment, full access mode
SD card inserted in the ventilator
Audio pause active
Ramp active
Status of detachable battery
Status of internal battery
Status of external battery
Battery is charging
Symbols and icons
© 2009 Koninklijke Philips Electronics N.V. All rights are reserved.
Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any
product at any time without notice or obligation and will not be liable for any consequences
resulting from the use of this publication.
Geyer W B 1/19/09 CI 4102101 PN 1059349
Philips Healthca e is pa t of
Royal Philips Elect onics
How to reach us
www.philips.com/healthcare
healthcar[email protected]
fax: [phone]
Asia
[phone]
Europe, iddle East,Africa
[phone]
Latin America
[phone]
North America
[phone]
800 285 5585 (toll free, US only)
Philips Respironics
1010 urry Ridge Lane
urrysville, PA 15668
Customer Service
724 387 4000
800 345 6443 (toll free)
Respironics Europe,Africa, iddle East
[phone]
www.philips.com/respironics
7
12 3
5
6
4
Set-up with exhalation valve Set-up with exhalation port
Circuit set-up
2
Proximal
pressure line
Exhalation
valve line
Flexible
tubing
Tracheostomy
tubing
Proximal
pressure port
Tee connector Exhalation valve
Mask without
integrated leak
Bacterial/ viral filter
(optional)
Flexible
tubing
Whisper
Swivel II
(exhalation
port)
Whisper
Swivel II
(exhalation
port)
Mask with
integrated leak
Mask without
integrated leak
Tracheostomy
tubing
Bacterial/ viral filter
(optional)
Please check that ci cuit type is p ope ly configu ed.
Before operating Trilogy100, you need to configure the circuit type.
To change the
porting block Proximal pressure line
Exhalation valve line
Respironics,Trilogy,Whisper Swivel, and Alice are trademarks of Respironics, Inc. and its affiliates.

Overview
Quick start guide
1
Proximal
pressure
line
Exhalation
valve line
1
2
3
4
Overview
Trilogy100
Circuit set-up
Set-up screen
Prescription set-up
Removable
air pathway
Remote
alarm
connector
Serial connector – to
connect to a computer or
Alice polysomnographs
Ethernet
connector
External
battery
connector
Air inlet and grey
foam filter
Detachable
battery
Oxygen valve port
(flow source up to
15 LP )
Exit
cm
H2O
Primary: S/T AVAPS
0 5 10 15 20 25 30
Select
Navigate
24/04/2007
04:53 PM
Cancel action or exit menu
Navigate menus or change settings
Select/modify/confirm parameters
Audio pause button
Start/stop button
AC power inlet
SD card to download ventilation data
7
6
5
4
3
2
1
Prescriber environment, full access mode
SD card inserted in the ventilator
Audio pause active
Ramp active
Status of detachable battery
Status of internal battery
Status of external battery
Battery is charging
Symbols and icons
© 2009 Koninklijke Philips Electronics N.V. All rights are reserved.
Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any
product at any time without notice or obligation and will not be liable for any consequences
resulting from the use of this publication.
Geyer W B 1/19/09 CI 4102101 PN 1059349
Philips Healthca e is pa t of
Royal Philips Elect onics
How to reach us
www.philips.com/healthcare
[e-mail]
fax: [phone]
Asia
[phone]
Europe, iddle East,Africa
[phone]
Latin America
[phone]
North America
[phone]
800 285 5585 (toll free, US only)
Philips Respironics
1010 urry Ridge Lane
urrysville, PA 15668
Customer Service
724 387 4000
800 345 6443 (toll free)
Respironics Europe,Africa, iddle East
[phone]
www.philips.com/respironics
7
12 3
5
6
4
Set-up with exhalation valve Set-up with exhalation port
Circuit set-up
2
Proximal
pressure line
Exhalation
valve line
Flexible
tubing
Tracheostomy
tubing
Proximal
pressure port
Tee connector Exhalation valve
Mask without
integrated leak
Bacterial/ viral filter
(optional)
Flexible
tubing
Whisper
Swivel II
(exhalation
port)
Whisper
Swivel II
(exhalation
port)
Mask with
integrated leak
Mask without
integrated leak
Tracheostomy
tubing
Bacterial/ viral filter
(optional)
Please check that ci cuit type is p ope ly configu ed.
Before operating Trilogy100, you need to configure the circuit type.
To change the
porting block Proximal pressure line
Exhalation valve line
Respironics,Trilogy,Whisper Swivel, and Alice are trademarks of Respironics, Inc. and its affiliates.

Exit
Settings And Alarms
Options
Alarm log
Select
Navigate
Exit
Settings And Alarms
Options
Alarm log
Event log
Information
Menu 1/10
Select
Navigate
Cancel
Dual Prescription OFF
Circuit Type Active PAP
Mode S/T
Menu Settings and Alarms 2/23
OK
Edit
Finish
AVAPS OFF
IPAP 30.0 cmH20
EPAP 8.0 cmH20
Modify
Navigate
Finish
Mode S/T
AVAPS OFF
IPAP 30.0 cmH20
EPAP 8.0 cmH20
Modify
Navigate
ake sure Trilogy100 is turned off before taking the following steps
Select Settings And Ala ms
Select Settings And Ala ms
Use to choose Active PAP (exhalation
valve set-up) or Passive (exhalation port set-up)
and then press twice to confirm
Press to change the parameter
highlighted in blue
Prescription set-up
4
B
B
D
CD
Menu
Exit
Dual Prescription OFF
Circuit Type Passive
Mode S/T
Menu Settings and Alarms 2/23
Modify
Navigate
A
A
E
C
From main screen, press Menu
Press and hold and for a few seconds
to access Set-up
page
Navigate to Ci cuitType and press
Dual Prescription
If Dual P esc iption is enabled, both prescriptions
need to be adjusted as previously explained
Dual Prescription ON
Mode S/T
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
Menu Settings And Alarms 1/20
Navigate
Modify
Finish
Two prescriptions to set
Exit
Switch to Secondary Settings
Safely Remove SD Card
Primary Settings and Alarms
Secondary Settings and Alarms
Options
Menu 3/8
Select
Navigate
RR 20BPM
PIP 5.9cm
H2O
Vte 435ml
Leak 21l/min
Peak Flow 67.9l/min
MinVent 8.7l/min
Scroll up and down using to navigate
through the settings and alarms
Press to begin therapy o
continue navigating through the menu
to set-up the ventilation parameters
Cancel
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
OK
Edit
Press to validate new setting
F
Cancel
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
OK
Edit
Mode S/T
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
Navigate
Modify
Finish
EG
Use to change the value or status
of setting
Press and
to return to the main screen
Set-up screen
3
Press to enter Menu Access
Navigate to Options and press
To enable full access to the settings
Setting the Active or Passive circuit
B
D
Use to choose Full or Limited Access
and press to confirm
A
C
Press and
to return to Initial Sc een
Exit
Settings And Alarms
Options
Alarm log
Event log
Information
Select
Navigate
Finish
Menu Access Limited
Detailed View OFF
Language English
Menu Options 1/18
Modify
Navigate
Cancel
Menu Access Full
Detailed View OFF
Language English
Menu Options 1/18
OK
Edit
Finish
Menu Access Full
Detailed View OFF
Language English
Menu Options 2/18
Modify
Navigate
Setting menu access

Exit
Settings And Alarms
Options
Alarm log
Select
Navigate
Exit
Settings And Alarms
Options
Alarm log
Event log
Information
Menu 1/10
Select
Navigate
Cancel
Dual Prescription OFF
Circuit Type Active PAP
Mode S/T
Menu Settings and Alarms 2/23
OK
Edit
Finish
AVAPS OFF
IPAP 30.0 cmH20
EPAP 8.0 cmH20
Modify
Navigate
Finish
Mode S/T
AVAPS OFF
IPAP 30.0 cmH20
EPAP 8.0 cmH20
Modify
Navigate
ake sure Trilogy100 is turned off before taking the following steps
Select Settings And Ala ms
Select Settings And Ala ms
Use to choose Active PAP (exhalation
valve set-up) or Passive (exhalation port set-up)
and then press twice to confirm
Press to change the parameter
highlighted in blue
Prescription set-up
4
B
B
D
CD
Menu
Exit
Dual Prescription OFF
Circuit Type Passive
Mode S/T
Menu Settings and Alarms 2/23
Modify
Navigate
A
A
E
C
From main screen, press Menu
Press and hold and for a few seconds
to access Set-up
page
Navigate to Ci cuitType and press
Dual Prescription
If Dual P esc iption is enabled, both prescriptions
need to be adjusted as previously explained
Dual Prescription ON
Mode S/T
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
Menu Settings And Alarms 1/20
Navigate
Modify
Finish
Two prescriptions to set
Exit
Switch to Secondary Settings
Safely Remove SD Card
Primary Settings and Alarms
Secondary Settings and Alarms
Options
Menu 3/8
Select
Navigate
RR 20BPM
PIP 5.9cm
H2O
Vte 435ml
Leak 21l/min
Peak Flow 67.9l/min
MinVent 8.7l/min
Scroll up and down using to navigate
through the settings and alarms
Press to begin therapy o
continue navigating through the menu
to set-up the ventilation parameters
Cancel
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
OK
Edit
Press to validate new setting
F
Cancel
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
OK
Edit
Mode S/T
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
Navigate
Modify
Finish
EG
Use to change the value or status
of setting
Press and
to return to the main screen
Set-up screen
3
Press to enter Menu Access
Navigate to Options and press
To enable full access to the settings
Setting the Active or Passive circuit
B
D
Use to choose Full or Limited Access
and press to confirm
A
C
Press and
to return to Initial Sc een
Exit
Settings And Alarms
Options
Alarm log
Event log
Information
Select
Navigate
Finish
Menu Access Limited
Detailed View OFF
Language English
Menu Options 1/18
Modify
Navigate
Cancel
Menu Access Full
Detailed View OFF
Language English
Menu Options 1/18
OK
Edit
Finish
Menu Access Full
Detailed View OFF
Language English
Menu Options 2/18
Modify
Navigate
Setting menu access

Exit
Settings And Alarms
Options
Alarm log
Select
Navigate
Exit
Settings And Alarms
Options
Alarm log
Event log
Information
Menu 1/10
Select
Navigate
Cancel
Dual Prescription OFF
Circuit Type Active PAP
Mode S/T
Menu Settings and Alarms 2/23
OK
Edit
Finish
AVAPS OFF
IPAP 30.0 cmH20
EPAP 8.0 cmH20
Modify
Navigate
Finish
Mode S/T
AVAPS OFF
IPAP 30.0 cmH20
EPAP 8.0 cmH20
Modify
Navigate
ake sure Trilogy100 is turned off before taking the following steps
Select Settings And Ala ms
Select Settings And Ala ms
Use to choose Active PAP (exhalation
valve set-up) or Passive (exhalation port set-up)
and then press twice to confirm
Press to change the parameter
highlighted in blue
Prescription set-up
4
B
B
D
CD
Menu
Exit
Dual Prescription OFF
Circuit Type Passive
Mode S/T
Menu Settings and Alarms 2/23
Modify
Navigate
A
A
E
C
From main screen, press Menu
Press and hold and for a few seconds
to access Set-up
page
Navigate to Ci cuitType and press
Dual Prescription
If Dual P esc iption is enabled, both prescriptions
need to be adjusted as previously explained
Dual Prescription ON
Mode S/T
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
Menu Settings And Alarms 1/20
Navigate
Modify
Finish
Two prescriptions to set
Exit
Switch to Secondary Settings
Safely Remove SD Card
Primary Settings and Alarms
Secondary Settings and Alarms
Options
Menu 3/8
Select
Navigate
RR 20BPM
PIP 5.9cm
H2O
Vte 435ml
Leak 21l/min
Peak Flow 67.9l/min
MinVent 8.7l/min
Scroll up and down using to navigate
through the settings and alarms
Press to begin therapy o
continue navigating through the menu
to set-up the ventilation parameters
Cancel
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
OK
Edit
Press to validate new setting
F
Cancel
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
OK
Edit
Mode S/T
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
Navigate
Modify
Finish
EG
Use to change the value or status
of setting
Press and
to return to the main screen
Set-up screen
3
Press to enter Menu Access
Navigate to Options and press
To enable full access to the settings
Setting the Active or Passive circuit
B
D
Use to choose Full or Limited Access
and press to confirm
A
C
Press and
to return to Initial Sc een
Exit
Settings And Alarms
Options
Alarm log
Event log
Information
Select
Navigate
Finish
Menu Access Limited
Detailed View OFF
Language English
Menu Options 1/18
Modify
Navigate
Cancel
Menu Access Full
Detailed View OFF
Language English
Menu Options 1/18
OK
Edit
Finish
Menu Access Full
Detailed View OFF
Language English
Menu Options 2/18
Modify
Navigate
Setting menu access

Exit
Settings And Alarms
Options
Alarm log
Select
Navigate
Exit
Settings And Alarms
Options
Alarm log
Event log
Information
Menu 1/10
Select
Navigate
Cancel
Dual Prescription OFF
Circuit Type Active PAP
Mode S/T
Menu Settings and Alarms 2/23
OK
Edit
Finish
AVAPS OFF
IPAP 30.0 cmH20
EPAP 8.0 cmH20
Modify
Navigate
Finish
Mode S/T
AVAPS OFF
IPAP 30.0 cmH20
EPAP 8.0 cmH20
Modify
Navigate
ake sure Trilogy100 is turned off before taking the following steps
Select Settings And Ala ms
Select Settings And Ala ms
Use to choose Active PAP (exhalation
valve set-up) or Passive (exhalation port set-up)
and then press twice to confirm
Press to change the parameter
highlighted in blue
Prescription set-up
4
B
B
D
CD
Menu
Exit
Dual Prescription OFF
Circuit Type Passive
Mode S/T
Menu Settings and Alarms 2/23
Modify
Navigate
A
A
E
C
From main screen, press Menu
Press and hold and for a few seconds
to access Set-up
page
Navigate to Ci cuitType and press
Dual Prescription
If Dual P esc iption is enabled, both prescriptions
need to be adjusted as previously explained
Dual Prescription ON
Mode S/T
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
Menu Settings And Alarms 1/20
Navigate
Modify
Finish
Two prescriptions to set
Exit
Switch to Secondary Settings
Safely Remove SD Card
Primary Settings and Alarms
Secondary Settings and Alarms
Options
Menu 3/8
Select
Navigate
RR 20BPM
PIP 5.9cm
H2O
Vte 435ml
Leak 21l/min
Peak Flow 67.9l/min
MinVent 8.7l/min
Scroll up and down using to navigate
through the settings and alarms
Press to begin therapy o
continue navigating through the menu
to set-up the ventilation parameters
Cancel
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
OK
Edit
Press to validate new setting
F
Cancel
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
OK
Edit
Mode S/T
AVAPS ON
Tidal Volume 400 ml
IPAP Max Pressure 25.0 cmH20
Navigate
Modify
Finish
EG
Use to change the value or status
of setting
Press and
to return to the main screen
Set-up screen
3
Press to enter Menu Access
Navigate to Options and press
To enable full access to the settings
Setting the Active or Passive circuit
B
D
Use to choose Full or Limited Access
and press to confirm
A
C
Press and
to return to Initial Sc een
Exit
Settings And Alarms
Options
Alarm log
Event log
Information
Select
Navigate
Finish
Menu Access Limited
Detailed View OFF
Language English
Menu Options 1/18
Modify
Navigate
Cancel
Menu Access Full
Detailed View OFF
Language English
Menu Options 1/18
OK
Edit
Finish
Menu Access Full
Detailed View OFF
Language English
Menu Options 2/18
Modify
Navigate
Setting menu access

Overview
Quick start guide
1
Proximal
pressure
line
Exhalation
valve line
1
2
3
4
Overview
Trilogy100
Circuit set-up
Set-up screen
Prescription set-up
Removable
air pathway
Remote
alarm
connector
Serial connector – to
connect to a computer or
Alice polysomnographs
Ethernet
connector
External
battery
connector
Air inlet and grey
foam filter
Detachable
battery
Oxygen valve port
(flow source up to
15 LP )
Exit
cm
H2O
Primary: S/T AVAPS
0 5 10 15 20 25 30
Select
Navigate
24/04/2007
04:53 PM
Cancel action or exit menu
Navigate menus or change settings
Select/modify/confirm parameters
Audio pause button
Start/stop button
AC power inlet
SD card to download ventilation data
7
6
5
4
3
2
1
Prescriber environment, full access mode
SD card inserted in the ventilator
Audio pause active
Ramp active
Status of detachable battery
Status of internal battery
Status of external battery
Battery is charging
Symbols and icons
© 2009 Koninklijke Philips Electronics N.V. All rights are reserved.
Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any
product at any time without notice or obligation and will not be liable for any consequences
resulting from the use of this publication.
Geyer W B 1/19/09 CI 4102101 PN 1059349
Philips Healthca e is pa t of
Royal Philips Elect onics
How to reach us
www.philips.com/healthcare
healthcar[email protected]
fax: [phone]
Asia
[phone]
Europe, iddle East,Africa
[phone]
Latin America
[phone]
North America
[phone]
800 285 5585 (toll free, US only)
Philips Respironics
1010 urry Ridge Lane
urrysville, PA 15668
Customer Service
724 387 4000
800 345 6443 (toll free)
Respironics Europe,Africa, iddle East
[phone]
www.philips.com/respironics
7
12 3
5
6
4
Set-up with exhalation valve Set-up with exhalation port
Circuit set-up
2
Proximal
pressure line
Exhalation
valve line
Flexible
tubing
Tracheostomy
tubing
Proximal
pressure port
Tee connector Exhalation valve
Mask without
integrated leak
Bacterial/ viral filter
(optional)
Flexible
tubing
Whisper
Swivel II
(exhalation
port)
Whisper
Swivel II
(exhalation
port)
Mask with
integrated leak
Mask without
integrated leak
Tracheostomy
tubing
Bacterial/ viral filter
(optional)
Please check that ci cuit type is p ope ly configu ed.
Before operating Trilogy100, you need to configure the circuit type.
To change the
porting block Proximal pressure line
Exhalation valve line
Respironics,Trilogy,Whisper Swivel, and Alice are trademarks of Respironics, Inc. and its affiliates.