Philips InstantFit T8 User guide

LED
InstantFit T8
with EasySmart
technology
Technical
Application Guide
Philips is now introducing a new line of connected LED lighting products with
EasySmart technology. Philips InstantFit LED T8 with EasySmart technology is
compatible with veried
1electronic ballasts. It is the easiest way to replace
uorescent lamps with connected LED lamps without rewiring the xture. It is true
plug and play. The lamp oers standard ZigBee based connectivity that easily
interoperates with various control devices. Compared with a non-connected LED
solution, EasySmart technology realizes more energy savings by enabling
advanced control options.

Drivers
•Compatible with verified electronic ballasts
•Designed and approved to UL, CSA and FCC
Dimension
•Compliant with IEC and ANSI standards
LED
•Latest innovation in LED chip design
2
User comfort
•Uniform light output with advanced optical design.
•Personal light setting to enhance user comfort and
productivity.
•Typical CRI 82.
Reliability
•Reliable operation between -20°C and +45°C
ambient temperature.
•Tested to B50 L70 requirement. Lamps are rated
for 50,000 hours.
•200,000 switching cycles.
Safety
•Over voltage and over temperature protection.
•Complies with relevant UL and CSA safety
requirements.
•Shatterproof polycarbonate (PC) material.
Environment
•No Mercury.
•Low Carbon Footprint.
Ballast Compatibility
•Innovative driver design that enables a
“plug-and-play” LED solution.
•Compatible with veried 1electronic ballast.
•Quick and easy installation.
Connectivity
•ZigBee based wireless interface.
•Reliable and secure wireless communication,
nominal range 40 feet.
•Up to 50 lamps in one network.
•Easy commissioning and (re-)conguration from
the oor.
Control Functionality
•Automatic on/o and dimming based on
occupancy detection and daylight variation.
•Personal dimming and scene setting with ZigBee
wireless switch.
•High-end trimming to help save energy and
extend lamp life.
Energy Savings
•Energy savings of 50% or more* when used with
advanced control such as dimming, occupancy
sensing and daylight harvesting.
•DLC listed.
Product Features
Optics
•Advanced optical system with
high efficiency reflector
Connectivity
•Standard ZigBee based wireless interface
•Integrated infrared (IR) receiver
Thermal
•Enhanced thermal
management features
IR receiver
* 50% energy savings compared to an F32T8 when dimmed
at least 30% for 10% of the time product is on.

Applications
Private Oce
Restroom
3
Communication between lamps, switches and sensors is ZigBee based. To facilitate the installation,
Philips provides an IR programming tool as accessory. Your control device manufacturer will provide
a tool (ie: mobile app), to commission the sensor and switch.
* Philips InstantFit LED T8 with EasySmart technology uses ZigBee protocol to communicate with each other and control devices.
* EasySmart IR programming tool communicates with individual lamp via infrared.
System Overview
Philips InstantFit LED T8 with
EasySmart Technology ZigBee Wireless Switch
Philips EasySmart IR
Programming Tool Commission Tool, e.g. mobile app
Occupancy Sensor and
Daylight Sensor (optional)
Classroom
Open-plan Oce Common Area
StairwellCorridor
Conference Room

Spectral Power Distribution
200 450 500400 550
250 300 350 650 700 750600 800
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Intensity (mW/nm) in %
Wavelength (nm)
TLED 14W 3000K
200 450 500400 550
250 300 350 650 700 750600 800
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Intensity (mW/nm) in %
Wavelength (nm)
TLED 14W 3500K
200 450 500400 550
250 300 350 650 700 750600 800
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Intensity (mW/nm) in %
Wavelength (nm)
TLED 14W 4000K
200 450 500400 550
250 300 350 650 700 750600 800
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Intensity (mW/nm) in %
Wavelength (nm)
TLED 14W 5000K
Photometric Diagrams
4
1 x TLED 14W 3000K 160D 9290012811 1 x 2000 lm
1 x TLED 14W 3500K 160D 9290012812 1 x 2000 lm

5
1 x TLED 14W 4000K 160D 9290012813 1 x 2100 lm
1 x TLED 14W 5000K 160D 9290012814 1 x 2100 lm
Lifetime and Lumen Maintenance
Philips InstantFit LED T8 with EasySmart
technology has a lifetime of 50,000 hours.
This is dened as the number of hours when
50% of a large group of identical lamps drop
below 70% of its initial lumen.
100%
95%
90%
85%
80%
75%
70%
0 40000 5000020000 3000010000
Lumen Maintenance
Hours
Lifetime and Dimming
Dimming can help extend lifetime (ie: dimming
30% can extend lifetime by 9,000hrs)
40% 100%
80000
75000
70000
65000
60000
55000
50000
45000
40000
20% 30%10% 80% 90%60% 70%50%
Lifetime (hrs)
Light Output

6
Lifetime and Failure Rate
Lifetime vs. Failure rate @Ta 25°C Lifetime vs. Failure Rate vs. Tcase
Temperature
Dimensions
Operating temperature T operating min -20°C max +45°C
Storage temperature T storage min -40°C max +65°C
Maximum case temperature of tube at Tamb.=25°C T case +37°C
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0
0 2000010000 60000500004000030000
Cumulate Failure Rate
Lifetime (Hrs)
80%
70%
60%
50%
40%
30%
20%
10%
0
0 20000 30000 40000 50000 6000010000
TC=35
TC=45
TC=55
Total Failure Rate
Lifetime (Hrs)
25 35 45 55
60000
50000
40000
30000
20000
10000
0
F10L70
F50L70
Lifetime (hrs)
TC (oC)TC (oC)
100%
99%
98%
97%
96%
95%
94%
93%
92%
Lumen (% )
37 42 52 5747
TC Position
B
B
TC Position
White Side
Diusive Side
SECTION B-B

Dimensions (mm)
Product A1
14T8/48 1198.1 1205.2 1212.3 25.6 27.8
D1 D2A2 A3
A1
A2
A3
Technical Specication
Product Description Bare Average Standby Initial Lifetime Cap Length Bulb CCT RF Product
Lamp System Power* Lumens Base Type Range number
Watts* Watts*
( W ) ( W ) ( W ) ( lm ) ( hrs ) ( lm ) ( K ) ( ft )
14T8/48-3000 IF 10/1 EasySmart 14 17 ≤0.5 2000 50,000 G13 48 T8 3000 40 929001281104
14T8/48-3500 IF 10/1 EasySmart 14 17 ≤0.5 2000 50,000 G13 48 T8 3500 40 929001281204
14T8/48-4000 IF 10/1 EasySmart 14 17 ≤0.5 2100 50,000 G13 48 T8 4000 40 929001281304
14T8/48-5000 IF 10/1 EasySmart 14 17 ≤0.5 2100 50,000 G13 48 T8 5000 40 929001281404
Control Compatibility
Brand Model ID/Order Code Product Description
Accessory
Ordering Code Product Number Product Description
473504 929001390604 EasySmart IR Programming Tool 10/1
*Test based on reference instant-start ballast
D2
D1
Please visit www.philips.com/EasySmart for latest information on ballast compatibility.
Philips InstantFit LED T8 with EasySmart technology now work with:
Product must be used with compatible control devices. Please visit www.philips.com/EasySmart for latest
information on control compatibility.
Intellect Decora Lumina RF 1-Button multi-function BLE keypad with room
controller and LED feedback functionality, 120-277VAC, 50/60Hz, White
Intellect Decora Lumina RF 2-Button multi-function BLE keypad with room
controller and LED feedback functionality, 120-277VAC, 50/60Hz, White
Intellect Decora Lumina RF 4-Button multi-function BLE keypad with room
controller and LED feedback functionality, 120-277VAC, 50/60Hz, White
Intellect Decora Lumina RF 8-Button multi-function BLE keypad with room
controller and LED feedback functionality, 120-277VAC, 50/60Hz, White
Lumina RF PIR Occupancy Sensor, 450 sq ft
Lumina RF PIR Occupancy Sensor, 1,500 sq ft
Lumina RF Wireless Photocell
Neuron App
Leviton DLDNK-01W
Leviton DLDNK-02W
Leviton DLDNK-04W
Leviton DLDNK-08W
Leviton ZSC04-IxW
Leviton ZSC15-IxW
Leviton LURPC-00W
Leviton FREE
7

© 2017 Philips Lighting Holding B.V. All rights reserved. Philips
reserves the right to make changes in specications and/
or to discontinue any product at any time without notice or
obligation and will not be liable for any consequences
resulting from the use of this publication.
EasySmart TAG 03/2017 www.philips.com/lighting
Philips Lighting North America Corporation
200 Franklin Square Drive, Somerset, NJ 08873
Tel. [phone]
Philips Lighting Canada Ltd.
281 Hillmount Rd, Markham, ON, Canada L6C 2S3
Tel. [phone]
Philips InstantFit LED T8 with EasySmart technology strictly follows applicable legislation and standard.
The product complies with UL,CSA,NSF and RoHS.
Product is DLC qualied.
Philips is a member of ZigBee Alliance. Product is ZigBee certied.
Approbation & Certicates
Application Notes
• Product is dimmable by wireless control
• Suitable for damp locations
• Reliable operation between -20°C to + 45°C ambient temperature
• Suitable to replace T8 fluorescent lamps that operate on instant-start ballasts
Please refer to www.philips.com/EasySmart for latest ballast compatibility list
• Require use of shunted lamp holders
• Not intended for use in emergency luminaires
• Not compatible with luminaires that use a remote starter
• Modifications to the product void the limited warranty.
For warranty information, please see www.philips.com/warranties
• You are required to read and understand the Quick Installation Guide and all warnings,
cautions and other materials related to installation published at:
www.philips.com/EasySmart before commencing installation work.
Footnotes
1Veried as compatible by Philips. Visit www.philips.com/EasySmart for latest ballast compatibility guide.