Phonak NHS Nathos Nova User manual

Pairing your
Nathos Nova Hearing Aid
to a Bluetooth®enabled device
On your device (e.g. a phone),
ensure that Bluetooth wireless
technology is enabled and
search for Bluetooth enabled
devices in the connectivity
setting menu.
Switch both hearing aids off,
and on again. You now have
have 3 minutes to pair your
hearing aids with your device.
1
2
3
Your device shows a list of Bluetooth enabled devices.
At this stage you will only see one hearing aid,
continue and select the hearing aid from the list. This
will simultaneously pair both hearing aids to your
phone. A beep confirms successful pairing.
After your hearing aids have been paired to your device,
they will automatically connect again when switched on.
Your hearing aids
connect directly
with Bluetooth®
enabled phones.
When paired and
connected to your
phone, you will hear
the caller’s voice directly in your hearing aids.
Your hearing aids pick up your voice through its own
microphones. You can accept, end and reject calls directly
on your phone or via your hearing aids (see below)
Initial Pairing
Phone calls
Caller’s voice
Your
voice
Nathos Nova PR
Nathos Nova M

Accepting, ending and rejecting a call
Your Audiologist may recommend you connect your
Hearing Aid to the myPhonak app to give you access to
select, adjust and save existing hearing aid functions as
well as access to Remote Support appointments with your
Audiologist.
MyPhonak App
Bluetooth®is a registered trademark owned by the Bluetooth SIG, Inc.
A call can be
accepted by a
short press on the
upper or lower
part of the
multi-function
button
short press
< 2 sec
An incoming call
can be rejected
by a long press
on the upper or
lower part of the
multi-function
button
long press
> 2 sec
A call can be
ended by a long
press on the
upper or lower
part of the
multi-function
button
long press
> 2 sec