Phytec IoT-Enablement-Kit 4 User manual

Quick
Start
Guide
L-847e_0
Germany
PHYTEC Messtechnik GmbH
D-55129 Mainz
t [phone]
f [phone]
www.phytec.de
www.phytec.eu
USA
PHYTEC America LLC
Bainbridge Island, WA 98110
t [phone]
f [phone]
www.phytec.com
France
PHYTEC France SARL
F-72140 Sillé le Guillaume
t [phone]
f [phone]
www.phytec.fr
India
PHYTEC Embedded Pvt. Ltd.
Koramangala
Bangalore 560095
t [phone]/49
www.phytec.in
China
PHYTEC Information Technology Co. Ltd.
Nanshan District, Shenzhen
518026 PRC
t [phone]
www.phytec.cn
KIT CONTENTS: phyNODE® -KW41Z mit phyWAVE©-KW41Z
JTAG Cable
Lanyard & Clip
Arduino Shields slot
Micro-USB Cable CR2032 Battery, AA with clips Lanyard clip
AA battery holder
or Lanyard loop
Battery
Mount
CR2032
Power
Universal Debugger
(detachable)
phyWAVE-KW41Z Wireless
Module
User-Button
Reset-
Button
Temperature
Humidity
Sensor
HDC1010
Air
Quality
Sensor
C C S811
Color
Light
Sensor
TCS37727
RGB-LED
S2
X2
X4
IoT-Enablement-Kit 4
Get your wireless sensor IoT-Kit powered up and running in just a few simple steps.
1) Preparing the Hardware
1. Prerequisites: Android Smartphone (Requires Android 5.0 and up)
2. Source code of the phyNODE Android app is available on Github
Open the GitHub page and search for „phynode-android-app“.
You can find the app in the „PHYTEC Messtechnik GmbH“ GitHub page.

3) Getting Connected
1. In the open phyNODE Android app click START SCAN to scan for phyNODE Boards
in Advertising Mode (D).
2. The App will find one active phyNODE board (E).
3. Click the phyNODE-ePaper that is being listed in your App.
You can add all details for writing new data to the passive display of the phyNODE (F).
Updating the passive display of the phyNODE
4. Fill the fields in the form with your Title, Name and Department
5. You can set a monochrome 125*25 pixel picture for your company logo optional
6. A preview of the passive display contents will be shown in the upper area of the App (G).
7. Click „SEND“ to upload the picture to the phyNODE (H).
After sending the data to the phyNODE, the passive display will update its content.
IoT-Enablement-Kit 4
2) Prepare your Smartphone & phNODE
Prepare your Android Smartphone
1. Open Google Play Store with your Android smartphone with Android 5.0 or up
and search for „phyNODE“ (A).
2. Install „phyNODE“ App to your smartphone and open.
Start your phyNODE Board
3. Insert the CR2032 Coin Cell (B).
4. Press Button S2 once (C).
Now your phyNODE Board is active and in Bluetooth Low Energy Advertising Mode.
D
CB
F
H
A
E
G
User-Button S2