Pioneer CA-HM-UNI-EVO.008 User manual

Installation manual CA-HM-UNI-EVO.008 | Version 1.0
EN - Installation Manual
Secure the assembly mount to thebrackets of your 2-DIN kit
using (4) Phillips screwsprovided. Route the RGB display cable
from the radio chassis, through the opening in
the assembly mount.
Secure the display brackets to the assembly mount using (4)
Allen head screws provided. Note: The brackets have a locking
pin on them which must face outwards.
Secure the radio chassis to the brackets
of your 2-DIN kit using (4) screws supplied
with the radio.
2
2
3
3
1
1
CA-HM-UNI-EVO.008
UNIVERSAL 2-DIN INSTALLATION KIT
a
a
b
b
c
c
d
d
f
f
g
g
e
e
a. Assembly
Mount
Kit components
Tools required (not included)
• Phillips Screwdriver
• 4 mm Allen Head Screwdriver
• Washer or Belt / Nut
Combination
Please note
For steps 2 and 6, reference to the installation manual provided with the radio for which hardware
to use. The display screen and radio chassis use two different types of screws.
b. Display
Housing
c. Display
Trim Ring
d. Display
Brackets
f. 4x #8 x 1/2”
Phillips Screws
e. 5° Angle
Display Brackets
g. 4x 4mm
Allen Head Screws
Optional extension cable CD-RGB150E available if required.

Installation manual CA-HM-UNI-EVO.008 | Version 1.0
Secure the radio display to the display
housing using (4) screws supplied with the radio.
Plug the RGB display cable into the display, then slide and lock
in place the display housing to the display brackets. Note: The
locking pins can be pulled back to release the display housing.
Clip the display trim ring onto the assembly.
4
4
5
5
6
6