Piusi SQUALO35 User manual

Bulletin M0467A ml_00
piusi
SQUALO35
submersible pump

M0467A
20 /124
Installation, use and maintenance
TABLE OF CONTENTS
1 MACHINE AND MANUFACTURER IDENTIFICATION 21
2 CONFORMITY 21
2.1 DECLARATION OF CONFORMITY 21
2.2 Declaration of compatibility 21
3 MACHINE DESCRIPTION 22
3.1 HANDLING AND TRANSPORT 22
4 GENERAL WARNINGS 22
5 SAFETY INSTRUCTIONS 23
6 FIRST AID RULES 24
7 GENERAL SAFETY RULES 25
8 TECHNICAL DATA 25
9 OPERATING CONDITIONS 26
9.1 ENVIRONMENTAL CONDITIONS 26
9.2 ELECTRICAL POWER SUPPLY 26
9.3 DUTY CYCLE 26
10 INTENDED USE 27
10.1 PERMITTED AND NON-PERMITTED FLUIDS 27
10.2 USE 27
11 INSTALLATION 29
11.1 POSITIONING, CONFIGURATIONS AND ACCESSORIES 30
11.2 NOTES ON DELIVERY LINES 30
12 CONNECTIONS 31
12.1 ELECTRICAL CONNECTIONS 31
13 INITIAL START-UP 32
14 EVERY DAY USE 33
15 MAINTENANCE 33
16 NOISE LEVEL 34
17 PROBLEMS AND SOLUTIONS 34
18 DEMOLITION AND DISPOSAL 35
19 OVERALL DIMENSIONS AND EXPLODED VIEW 121

21/124
21 /124
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
(translated from italian) SUBMERSIBLE PUMP
EN
1 MACHINE AND MANUFACTURER IDENTIFICATION
AVAILABLE MODELS 230V AC
MANUFACTURER PIUSI S.p.A. - Via Pacinotti 16/A - Z.I. Rangavino - 46029 Suzzara (MN) Italy
YEAR OF
MANIFACTURE
MODEL
CODE
PRODUCT
TECHNICAL
DATA
2 CONFORMITY
2.1 DECLARATION OF CONFORMITY
The undersigned: PIUSI S.p.A.
Via Pacinotti 16/A -Z.I. Rangavino
46029 Suzzara (MN) Italy
Hereby states under its own responsibility, that the equipment described below:
Description : SUBMERSIBLE VOLUMETRIC ELECTRIC PUMP
Model : PIUSI SQUALO35
Serial number: refer to Lot Number shown on CE plate affixed to product
Year of manufacture: refer to the year of production shown on the CE plate affixed to the product is
in conformity with the legal provisions indicated in the directives :
- Machine Directive 2006/42/EC
- Electromagnetic Compatibility Directive 2014/30/EU
The documentation is at the disposal of the competent authority following motivated request at Piusi S.p.A.
or following request sent to the e-mail address: [email protected]om. The person authorised to compile the
technical file and draw up the declaration is Otto Varini as legal representative
Suzzara, 01/03/20 Otto Varini
legal representative
2.2 DECLARATIONOFCOMPATIBILITY
The undersigned: PIUSI S.p.A
Via Pacinotti 16/A - z.i. Rangavino
46029 Suzzara - (MN) - Italy
DECLARES
That SQUALO35 components in direct contact with the liquids handled, have been tested in confor-
mity with the following directives
ISO22241-1 : 2006 (quality standard)
Diesel engines -- NOx reduction agent AUS 32 -- Part 1: Quality requirements and have been tested
with the requirements of the following norm
ISO22241-2 : 2006 (quality standard)
Diesel engines -- NOx reduction agent AUS 32 -- Part 2: Test methods
The Adblue liquid , both before and after testing, resulted within the specified AUS32 (AdBlue) limit
in conformance with ISO22241-2-2006 ( as per Norm DIN V 70070)
Suzzara 01/03/2020 Otto Varini
The legal representative

M0467A
22 /124
Installation, use and maintenance
3 MACHINE DESCRIPTION
PUMP Submersible volumetric electric pump for AUS32 (DEF, AdBlue®).
MOTOR Brush motor, DC, low tension with intermittent cycle, closed type in protec-
tion class IP68 according to CEI-EN 60034-5,
3.1 HANDLING AND TRANSPORT
Foreword Due to the limited weight and dimensions of the pumps, special lifting equipment
is not required to handle them. The pumps are carefully packed before dispatch.
Check the packing when receiving the material and store in a dry place.
ATTENTION During transport, it is mandatory to use personal protective equipment
(DPI)
PACKAGING The pump is equipped comes packed suitably for shipment.
On the packaging a label shows the following product information:
Under no circumstances must the electric pump be supported or transport-
ed to the power cord. Be use it to the appropriate handle
- name
- code
- weight
WEIGHT (Kg) PACKAGING DIMENSION(mm)
7 200 x 200 x 430
4 GENERAL WARNINGS
Warnings To ensure operator safety and to protect the dispensing system from poten-
tial damage, workers must be fully acquainted with this instruction manual
before attempting to operate the dispensing system.
Symbols used
in the manual The following symbols will be used throughout the manual to highlight safety information and precautions of particular importance:
ATTENTION
This symbol indicates safe working practices for operators and/or poten-
tially exposed persons.
WARNING
This symbol indicates that there is risk of damage to the equipment and/
or its components.
NOTE
This symbol indicates useful information.
Manual preser-
vation This manual should be complete and legible throughout. It should remain available to end users and specialist installation and maintenance techni-
cians for consultation at any time.

23/124
23 /124
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
(translated from italian) SUBMERSIBLE PUMP
EN
Reproduction
rights All reproduction rights are reserved by Piusi S.p.A. The text cannot be reprinted without the written permission of Piusi S.p.A.
© Piusi S.p.A.
THIS MANUAL IS THE PROPERTY OF Piusi S.p.A.
ANY REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
This manual belongs to Piusi S.p.A., which is the sole proprietor of all rights
indicated by applicable laws, including, by way of example, laws on copy-
rights. All the rights deriving from such laws are reserved to Piusi S.p.A.: the
reproduction, including partial, of this manual, its publication, change, tran-
scription and notification to the public, transmission, including using remote
communication media, placing at disposal of the public, distri¬bution, market-
ing in any form, translation and/or processing, loan and any other activity
reserved by the law to Piusi S.p.A..
5 SAFETY INSTRUCTIONS
Mains - pre-
liminary checks
before inst
ATTENTION
You must avoid any contact between the electrical power supply and the
fluid that needs to be FILTERED.
Maintenance
control Before any checks or maintenance work are carried out, disconnect the power source.
FIRE AND
EXPLOSION
When flammable
fluids are present
in the work area,
such as gasoline
and windshield
wiper fluid, be
aware that flam-
mable fumes can
ignite or explode.
To help prevent fire
and explosion:
Pump not suitable for pumping flammable liquids or operating in explosive
environments
ELECTRIC
SHOCK
Electrocution or
death
FThis pump must be grounded. Improper grounding, setup or usage of the
pump can cause electric shock.
Connect only to a grounded electrical outlets.
Use only 3 wire extension cords in accordance with local electrical codes.
Extension cords should have a ground lead.
Ensure ground prongs are intact on power and extension cords.
Outside, use only extensions suitable for specific use, according to applicable
regulations.
Unsuitable extensions may be dangerous
Never touch electrical connections with wet hands
Do not turn the pump on if the power connection cord or other important parts of
the apparatus are damaged, such as the inlet outlet plumbing, dispensing nozzle or
safety devices. Replace damaged components before operation.
Before each use check that the power connection cord and power plug are
not damaged. If damaged, have power connection cord replaced before use
by a qualified electrician.
The electrical connection between the plug and socket must be kept well
away from water.