Planet IXT-900-1X1T User manual

Industrial 10GBASE-T to 10GBASE-X SFP+
Managed Media Converter
IXT-900 Series
Quick Installation Guide

Table of Contents
1. Package Contents................................................................................. 3
2. Requirements....................................................................................... 4
3. Wiring DC Power Inputs........................................................................ 5
4. Starting Web Management .................................................................... 6
4.1 Logging in to the Industrial Managed Media Converter ...................... 6
 4.2 SavingCongurationviaWebInterface ........................................... 8
5. RestoringDefaultConguration ............................................................. 9
6. Customer Support .............................................................................. 11

3
1. Package Contents
Thank you for purchasing PLANET Industrial 10GBASE-T to 10GBASE-X SFP+
Managed Media Converter, IXT-900 Series. The table below shows the models
withthenumberofports:
Model
NumberContents
IXT-900-
1X1T IXT-900-2X IXT-900- 2X1T
IXT-900-
2X1PD
10GBASE-XSFP+Slot 1 2 2 2
10GBASE-TRJ45Port 1-1 1
PoEPD(powereddevice) ---
In this guide, the term “Industrial Managed Media Converter” refers
specically to the IXT-900-1X1T, IXT-900-2X, IXT-900-2X1T and IXT-900-
2X1PDmodels.
To begin, open the box of the Industrial Managed Media Converter and
carefullyunpackitscontents.Theboxshouldcontainthefollowingitems:
Model
NumberContents
IXT-900-
1X1T IXT-900-2X IXT-900- 2X1T
IXT-900-
2X1PD
Industrial Media Converter    
QuickStartGuideSheet    
DIN-railKit    
Wall-mountKit    
SFPDustCap 1 2 2 2
If any of these items are missing or damaged, please contact your dealer
immediately. If possible, keep the carton and original packing materials to
repacktheproductintheeventthatyouneedtoreturnittousforrepair.

4
2. Requirements
The Industrial Managed Media Converter provides a remote web interface
for management purposes. To further manage the device, you will need the
followingproducts.
zWorkstations running Windows 7/8/10/11, macOS 10.12 or later, Linux
Kernel 2.6.18 or later, or other modern operating systems are compatible
with TCP/IP Protocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard).
zEthernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45
connectors.
The PC mentioned above is installed with a Web browser such as
GoogleChrome,MozillaFirefoxorMicrosoftEdge.
To access the web interface of IXT-900-2X, use an RJ45 SFP
Transceiver.
If you are unable to access the Web interface of the Managed
Media Converter, try turning off your anti-virus software or fire-
wall and then try again.

5
3. Wiring DC Power Inputs
The 6-contact terminal block connector on the panel of the industrial Managed
Media Converter is used for two DC redundant power inputs. Follow the steps
below to insert the power wires.
1.Insert positive/negative DC power wires into Contacts 1/2 for Power 1, or
Contacts5/6forPower2.
Max. Fault Alarm Loading: 24V, 1A
DC Input:
9-48V , 1.5A max.
V1+ V2+
PWR1 Alarm PWR2
1 2 3 4 5 6
Figure 3-1: IXT-900 Series Upper Panel
2.Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
123456
V1+ V1- V2+ V2-
Power 1 Alarm Power 2
Figure 3-2: Power 1 & 2 Pins of Terminal Block Connector
PWR1 and PWR2 must provide the same DC voltage while
operating with dual power input.

6
4. Starting Web Management
The following steps show how to start up the Web Management for the
Managed Media Converter. Note that the Industrial Managed Media Converter
is congured through an Ethernet connection, so ensure that the manager PC
is set to the same IP subnet address.
For example, if the default IP address of the Managed Media Converter is
192.168.0.100, then the manager PC should be set to an IP address of
192.168.0.x (where x is a number between 1 and 254, except 100), and the
defaultsubnetmaskis255.255.255.0.
RJ45/UTP Cable
PLANET Managed
Media Converter
PC/Workstation with
Chrom, Edge or Firefox browser
4.1 Logging in to the Industrial Managed Media Converter
1.Use a modern Web browser to enter the default IP address
https://192.168.0.100toaccesstheWebinterface.
2.To access the main screen of IXT-900 series, enter the default username
“admin” and password “admin”(orthepassword you previously changed)
when the login screen appears. Then, click “Login”. The login screen is
showninFigure1.
DefaultIPAddress:192.168.0.100
DefaultAccount:admin
DefaultPassword:admin
Figure 1. Web Login Screen of Industrial Managed Media Converter

7
After entering the username and password, the main web screen will appear,
asinFigure2,onceloggedin.
Figure 2. Web Main Screen of Industrial Managed Media Converter
(Use IXT-900-2X1T as a representative)
The menu at the top of the web page provides access to all the commands
and statistics oered by the Industrial Managed Media Converter. Each menu
containssub-menuitems,asshowninFigures 3 & 4 below.
Figure 3. Main Menu
Figure 4. Sub-menu
You can now use the web management interface to continue managing the
Industrial Managed Media Converter. For more information, please refer to the
user manual.

8
For security reasons, change and memorize the new pass-
word after the first setup.
4.2 SavingCongurationviaWebInterface
Save all applied changes and set the current conguration as the startup
conguration after nishing the conguration. The system will automatically
loadthestartup-congurationleuponreboot.
1. Click the Save icon on the top Menu bar.
 Pressthe“Apply”button tosavetheconguration.
2.Another way to save the settings is to click Maintenance and then select
SaveConguration.

9
5.RestoringDefaultConguration
If the IP address has changed or the admin password has been
forgotten –
ToresettheIP addresstothedefaultIPAddress“192.168.0.100” or to reset
the login password to default value, press the hardware-based reset button on
thefront panelforabout 10 seconds.After thedevicereboots, youcan login
tothemanagementwebinterfacewithinthesame192.168.0.xxsubnet.
10GBASE-T
100/1G
10G
LNK/ACT
LNK/ACT
100/1G/2.5G LNK/ACT
LNK/ACT10G
Reset
10GBASE-X SFP+
P2P1 Alarm
IXT-900-1X1T
2.5G/5G LNK/ACT
1
2
10G Managed Conversion
100/1G/2.5G LNK/ACT
LNK/ACT10G
Reset
10GBASE-X SFP+
P2P1 Alarm
IXT-900-2X
1
2
10G Managed Conversion
Reset Button
IXT-900-1X1T IXT-900-2X

10
10GBASE-T
100/1G
10G
LNK/ACT
LNK/ACT
100/1G/2.5G LNK/ACT
LNK/ACT10G
Reset
10GBASE-X SFP+
P2P1 Alarm
IXT-900-2X1T
2.5G/5G LNK/ACT
1
2
3
10G Managed Conversion
10GBASE-T
100/1G
10G
LNK/ACT
LNK/ACT
100/1G/2.5G LNK/ACT
LNK/ACT10G
Reset
10GBASE-X SFP+
P2P1
PoE In
Alarm
IXT-900-2X1PD
2.5G/5G LNK/ACT
1
2
3
10G Managed Conversion
Reset Button
IXT-900-2X1T IXT-900-2X1PD