Planet IPX-330 User manual
Internet Telephony PBX System
(30/100/500 SIP Users Registrations)
IPX-330 / IPX-2100 / IPX-2500
Quick Installation Guide
Table of Contents
1. IPX-330..................................................................................................... 3
1.1. Package Contents................................................................................ 3
1.2. Hardware Installation........................................................................... 3
1.2.1 Safety Instructions ..................................................................... 3
1.2.2 Physical Introduction .................................................................. 4
1.2.3 LED&Buttondenitions ............................................................. 4
1.2.4 Placement.................................................................................. 5
1.2.5 Physical Connection.................................................................... 5
1.3. BasicSystemConguration .................................................................. 6
1.3.1 Web Login ................................................................................. 6
1.3.2 ConguringtheNetworkSetting .................................................. 7
1.3.3 Changing IP Address or forgotten admin password........................ 8
2. IPX-2100 ................................................................................................... 9
2.1. Package Contents................................................................................ 9
2.2. Hardware Installation........................................................................... 9
2.2.1 Safety Instructions ..................................................................... 9
2.2.2 Physical Introduction .................................................................10
2.2.3 LED&Buttondenitions ............................................................10
2.2.4 Placement.................................................................................11
2.2.5 Physical Connection...................................................................11
2.3. BasicSystemConguration .................................................................12
2.3.1 Web Login ................................................................................12
2.3.2 ConguringtheNetworkSetting .................................................13
2.3.3 Changing IP Address or forgotten admin password.......................14
3. IPX-2500 ..................................................................................................15
3.1. Package Contents...............................................................................15
3.2. Hardware Installation..........................................................................15
3.2.1 Safety Instructions ....................................................................15
3.2.2 Physical Introduction .................................................................16
3.2.3 LED&Buttondenitions ............................................................16
3.2.4 Placement.................................................................................17
3.2.5 Physical Connection...................................................................17
3.3 BasicSystemConguration .................................................................17
3.3.1 Web Login ................................................................................17
3.3.2 ConguringtheNetworkSetting .................................................18
4. FurtherConguration .................................................................................20
3
1. IPX-330
1.1.Package Contents
Thank you for purchasing PLANET Internet Telephony PBX system, IPX-330. This
QuickInstallationGuidewillintroduce howtonishthe basicsettingofconnecting
the web management interface and the Internet. Open the box of the Internet
Telephony PBX system and carefully unpack it. The box should contain the following
items:
IPX-330 x 1
l
Quick Installation Guide x 1
l
User’s Manual CD x 1
l
Power Adapter x 1 (12V DC)
l
RJ-45 x 1
l
If any of the above items are damaged or missing, please contact your dealer
immediately.
1.2.Hardware Installation
The following are instructions for setting up PLANET IPX-330. Refer to the
illustration and follow the simple steps below to quickly install your Internet
Telephony PBX system.
1.2.1 Safety Instructions
The following are the safety instructions for Internet Telephony PBX system before
installing.
The maximum operating temperature of the IPX-330 is -10~45°C, which allows
sufcientaircirculation.
The connections and equipment that supply power to the IPX-330 should
be capable of operating safely with the maximum power requirements of the
IPX-330.Intheeventofapoweroverload,thesupplycircuitsandsupplywiring
should become hazardous.
The power adapter must plug into the right supply voltage. Make sure that the
supplied power voltage is correct and stable. If the input power voltage is over
10%lowerthanthestandard,itmaycausetheIPX-330tomalfunction.
Generally, when installed after the nal conguration, the product must comply
with the applicable safety standards and regulatory requirements of the country
inwhichitisinstalled.Ifnecessary,consultfortechnicalsupport.
4
1.2.2 Physical Introduction
IPX-330
Internet Telephony PBX
Ringing
FXO
PWR SYS 1 2ETH
Front Panel of the IPX-330
2 1 ETH
Reset
12V DC
Rear Panel of the IPX-330
1.2.3 LED&Buttondenitions
LEDdenitions
Front Panel LED Status Description
PWR Steady Green
Off PBXPowerON
PBX Power OFF
SYS Blinking Green
Off System is working
System is off
ETH Blinking Green
Off PBX network connection is established
Waiting for network connection
FXO Steady Red
Flashing
Off
Ready / Standby
Ringing
System is off
Button Action Description
Reset Press less than 5 secs. System reboot
Press over 6 secs. Reset to Factory Default
5
1.2.4 Placement
Make sure the device is placed in a safe environment to avoid equipment failure.
DONOTplaceanythingontopofthedevice.Excessiveweightcoulddamageit.
DO NOT obstruct ventilation slots on each side of the IPX-330 or expose it to
direct sunlight or other heat source. Be sure that there is adequate air ow
around the IPX-330.
PlacetheIPX-330onaatsurfacetoavoidanydamage.
1.2.5 Physical Connection
100Base-TX UTP
Telephone wire
Internet
Video Phone IP Phone IP Phone
Switch Router
ATA Mobile
SIP Phone
PSTN
2 x FXO
Physical Connection Topology of the IPX-330
6
1.3.BasicSystemConguration
1.3.1 Web Login
Step 1. Connect a computer to an ETH port on the IPX-330. Your PC must set up
to the same domain as 192.168.0.X of the IPX-330.
Step 2. Start a web browser. To use the user interface, you need a PC with
InternetExplorer(version6andhigher),Firefox,orSafari(forMac).
Step 3. Enter the default IP address of the IPX-330: 192.168.0.1 into the URL
address box.
Step 4. Enter the default user name admin and the default password admin ,
and then click Login to enter Web-based user interface.
(Default IP)
Default ETH IP: 192.168.0.1
DefaultUserName:admin
Default Password: admin
Login page of the IPX-330
Note
For security reason, please change and memorize the new pass-
word after this first setup.
7
1.3.2 ConguringtheNetworkSetting
Step 1. GotoNetworkSettingsNetwork
Network & Country button
Network Setting page
8
Step 2. Edit your ETH port IP information .
There are three types of Ethernet port connection. They are Static IP, PPPoE
(Point-to-Point Protocol over Ethernet) and DHCP. You can nd detailed setting
process in the user manual.
Selection of IP Connection Type
1.3.3 Changing IP Address or forgotten admin password
To reset the IP address to the default IP Address “192.168.0.1” (ETH) or reset the
loginpasswordtodefaultvalue,presstheresetbuttononthefrontpanelformore
than 6 seconds.Afterthedeviceisrebooted,youcanloginthemanagementWEB
interface within the same subnet of 192.168.0.xx.
Reset Button
ETH
Reset
12V DC
Note
After pressing the “Reset” button, all the system data will be reset
todefault;ifpossible,backuptheconfigfilebeforeresetting.
9
2. IPX-2100
2.1.Package Contents
Thank you for purchasing PLANET Internet Telephony PBX system, IPX-2100. This
QuickInstallationGuidewillintroduce howtonishthe basicsettingofconnecting
the web management interface and the Internet. Open the box of the Internet
Telephony PBX system and carefully unpack it. The box should contain the following
items:
IPX-2100 x 1
l
Quick Installation Guide x 1
l
User’s Manual CD x 1
l
Power Adapter x 1 (12V)
l
RJ-45 x 1
l
Bracket x 2
l
If any of above items are damaged or missing, please contact your dealer
immediately.
2.2.Hardware Installation
The following are instructions for setting up PLANET IPX-2100. Refer to the
illustration and follow the simple steps below to quickly install your Internet
Telephony PBX system.
2.2.1 Safety Instructions
The following are the safety instructions for Internet Telephony PBX system before
installing.
The maximum operating temperature of the IPX-2100 is -10~45°C. Care must
betakentoallowsufcientaircirculation.
The connections and equipment that supply power to the IPX-2100 should
be capable of operating safely with the maximum power requirements of the
IPX-2100. In the event of a power overload, the supply circuits and supply
wiring should become hazardous.
The power adapter must plug into the right supply voltage. Make sure that the
supplied power voltage is correct and stable. If the input power voltage is over
10%lowerthanthestandard,itmaycausetheIPX-2100tomalfunction.
Generally, when installed after the nal conguration, the product must comply
with the applicable safety standards and regulatory requirements of the country
inwhichitisinstalled.Ifnecessary,consultfortechnicalsupport.
10
2.2.2 Physical Introduction
SLOT 1 SLOT 2
IPX-2100
Internet Telephony PBX System
Ringing
FXO
FXS
21 3 4 21 3 4PWR SYS USBETH
Front Panel of the IPX-2100
USB Console ETH
Reset
SLOT 2
12V DC
SLOT 1
Rear Panel of the IPX-2100
Note
Supporting 2 slots, user can buy expansion module like VIP-21FO
(4 x FXO), VIP-21SL (2 x FXO + 2 x FXS) or VIP-21GS (4 x GSM)
for extending port service.
2.2.3 LED&Buttondenitions
LEDdenitions
Front Panel LED Status Description
PWR Steady Green
Off PBXPowerON
PBX Power OFF
SYS Blinking Green
Off System is working
System is off
ETH Blinking Green
Off PBX network connection is established
Waiting for network connection
FXO Steady Red
Flashing
Off
Ready / Standby
Ringing
Module not available
FXS Steady Green
Flashing
Off
Ready / Standby
Ringing
Module not available
USB Void Future Feature
11
Button Action Description
Reset Press less than 5 secs. System reboot
Press over 6 secs. Reset to Factory Default
2.2.4 Placement
Make sure the device is placed in a safe environment to avoid equipment failure.
DONOTplaceanythingontopofthedevice.Excessiveweightcoulddamageit.
DO NOT obstruct ventilation slots on each side of the IPX-2100 or expose it
to direct sunlight or other heat source. Be sure that there is adequate air ow
around the IPX-2100.
PlacetheIPX-2100onaatsurfacetoavoidanydamage.
2.2.5 Physical Connection
USB Console ETH
Reset
SLOT 2
12V DC
SLOT 1
FXO Card Life Line Card
Internet
Video Phone IP Phone
SLT Phone FAX
IP Phone
Switch
Router
ATA
100Base-TX UTP
Telephone wire
PSTN
Mobile
SIP Phone
2xFXO + 2xFXS4 x FXO
Physical Connection Topology of the IPX-2100
12
2.3.BasicSystemConguration
2.3.1 Web Login
Step 1. Connect a computer to an ETH port on the IPX-2100. Your PC must set
up to the same domain as 192.168.0.X as the IPX-2100.
Step 2. Start a web browser. To use the user interface, you need a PC with
InternetExplorer(version6andhigher),Firefox,orSafari(forMac).
Step 3. Enter the default IP address of the IPX-2100: 192.168.0.1 into the URL
address box.
Step 4. Enter the default user name admin and the default password admin ,
then click Login to enter Web-based user interface.
(Default IP)
Default ETH IP: 192.168.0.1
DefaultUserName:admin
Default Password: admin
Login page of the IPX-2100
Note
For security reason, please change and memorize the new pass-
word after this first setup.
13
2.3.2 ConguringtheNetworkSetting
Step 1. GotoNetworkSettingsNetwork
Network & Country button
Network Setting page
14
Step 2. Edit your ETH port IP information.
There are three types of Ethernet port connection. They are Static IP, PPPoE
(Point-to-PointProtocoloverEthernet),DHCP.Youcannddetailedsettingprocess
in the user manual.
Selection of IP Connection Type
2.3.3 Changing IP Address or forgotten admin password
To reset the IP address to the default IP Address “192.168.0.1” (ETH) or reset the
login password to default value. Press the reset button on the front panel for more
than 6 seconds.Afterthedeviceisrebooted,youcanloginthemanagementWEB
interface within the same subnet of 192.168.0.xx.
Reset Button
Console ETH
Reset
12V DC
Note
After pressing the “Reset” button, all the system data will be reset
todefault;ifpossible,backuptheconfigfilebeforeresetting.
15
3. IPX-2500
3.1.Package Contents
Thank you for purchasing PLANET Internet Telephony PBX system, IPX-2500. This
QuickInstallationGuidewillintroduce howtonishthe basicsettingofconnecting
the web management interface and the Internet. Open the box of the Internet
Telephony PBX system and carefully unpack it. The box should contain the following
items:
IPX-2500 x 1
l
Quick Installation Guide x 1
l
User’s Manual CD x 1
l
Power Cord x 1 (12V)
l
RJ-45 x 1
l
Bracket x 2
l
If any of above items are damaged or missing, please contact your dealer
immediately.
3.2.Hardware Installation
The following are instructions for setting up PLANET IPX-2500. Refer to the
illustration and follow the simple steps below to quickly install your Internet
Telephony PBX system.
3.2.1 Safety Instructions
The following are the safety instructions for Internet Telephony PBX system before
installing.
The maximum operating temperature of the IPX-2500 is -10~45°C. Care must
betakentoallowsufcientaircirculation.
The connections and equipment that supply power to the IPX-2500 should
be capable of operating safely with the maximum power requirements of the
IPX-2500. In the event of a power overload, the supply circuits and supply
wiring should become hazardous.
The power adapter must plug into the right supply voltage. Make sure that the
supplied power voltage is correct and stable. If the input power voltage is over
10%lowerthanthestandard,itmaycausetheIPX-2500tomalfunction.
Generally, when installed after the nal conguration, the product must comply
with the applicable safety standards and regulatory requirements of the country
inwhichitisinstalled.Ifnecessary,consultfortechnicalsupport.
16
3.2.2 Physical Introduction
SLOT 2
IPX-2500
Internet Telephony PBX System
Ringing
FXO/GSM
FXS
34 2 1
SLOT 1
34 2 1PWR SYS LANWAN
Front Panel of the IPX-2500
100~240V AC
PWR VGA WAN LAN USB AUDIO SLOT 2 SLOT 1
Rear Panel of the IPX-2500
Note
Supporting 2 slots, user can buy expansion module like VIP-21FO
(4 x FXO), VIP-21SL (2 x FXO + 2 x FXS) or VIP-21GS (4 x GSM)
for extending port service.
3.2.3 LED&Buttondenitions
LEDdenitions
Front Panel LED Status Description
PWR Steady Green
Off PBXPowerON
PBX Power OFF
SYS Blinking Green
Off System is working
System is off
WAN Blinking Green
Off PBX network connection is established
Waiting for network connection
LAN Blinking Green
Off Data transfer
Waiting for network connection
FXO Steady Red
Flashing
Off
Ready / Standby
Ringing
Module not available
GSM Steady Red
Flashing
Off
Ready / Standby
Ringing
Module not available
FXS Steady Green
Flashing
Off
Ready / Standby
Ringing
Module not available
USB Void Future Feature
Audio Void Future Feature
17
3.2.4 Placement
Make sure the device is placed in a safe environment to avoid equipment failure.
DONOTplaceanythingontopofthedevice.Excessiveweightcoulddamageit.
DO NOT obstruct ventilation slots on each side of the IPX-2500 or expose it to
direct sunlight or other heat sources. Be sure that there is adequate air ow
around the IPX-2500.
PlacetheIPX-2500onaatsurfacetoavoidanydamage.
3.2.5 Physical Connection
100~240V AC
PWR VGA WAN LAN USB AUDIO SLOT 2 SLOT 1
FXO Card Life Line Card
Video Phone IP Phone Voice
Gateway
Switch
ATA
SLT Phone Fax
2 x FXO + 2 x FXS4 x FXO
Fax
PSTN
Internet
IP Phone Mobile
SIP Phone
100Base-TX UTP
1000Base-T UTP
Telephone wire
Physical Connection Topology of the IPX-2500
3.3 BasicSystemConguration
3.3.1 Web Login
Step 1. ConnectacomputertoaLANportontheIPX-2500.YourPCmustsetup
to the same domain as 192.168.0.X as the IPX-2500.
Step 2. Start a web browser. To use the user interface, you need a PC with
InternetExplorer(version6andhigher),Firefox,orSafari(forMac).
Step 3. Enter the default IP address of the IPX-2500: 192.168.0.1 into the URL
address box.
Step 4. Enter the default user name admin and the default password admin ,
and then click Login to enter Web-based user interface.
18
(Default IP)
DefaultWANIP:172.16.0.1
DefaultLANIP:192.168.0.1
DefaultUserName:admin
Default Password: admin
Login page of the IPX-2500
Note
For security reason, please change and memorize the new pass-
word after this first setup.
3.3.2 ConguringtheNetworkSetting
Step 1. GotoNetworkSettingsNetwork
Network & Country button
19
Network setting page
Step 2. EdityourWANportIPinformation.
There are three types of Ethernet port connection. They are Static IP, PPPoE
(Point-to-PointProtocoloverEthernet),DHCP.Youcannddetailedsettingprocess
in the user manual.
Selection of IP Connection Type
20
4.FurtherConguration
Thank you for purchasing PLANET products. The above steps introduce the simple
conguration of the IPX-330 / IPX-2100 / IPX-2500. For further conguration,
please refer to the user’s manual on the CD. If you have other questions, please
contact the local dealer or distributor where you purchased this product.
YoualsocanbrowseouronlineFAQresourceatthePLANETWebsitersttocheck
if it could solve your issue. If you need more support information, please contact
PLANETsupportteam.
PLANETonlineFAQ:
http://www.planet.com.tw/en/support/faq.php
Support team mail address:
Copyright © PLANET Technology Corp. 2014.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their
respective owners.
Other manuals for IPX-330
3
This manual suits for next models
2
Table of contents
Other Planet PBX manuals
Planet
Planet Internet Telephony PBX System IPX-300 Series User manual
Planet
Planet Internet Telephony PBX System IPX-300 Series User manual
Planet
Planet IPX-1000 User manual
Planet
Planet ISDN Internet Telephony PBX System IPX-1800N User manual
Planet
Planet IPX-330 User manual
Planet
Planet IPX-330 User manual
Planet
Planet IPX-1980 User manual
Planet
Planet IPX-1900 User manual
Planet
Planet IPX-1000 User manual
Planet
Planet IPX-1800 User manual
Planet
Planet Internet Telephony PBX System IPX-300 Series User manual
Planet
Planet IPX-600 User manual
Planet
Planet IPX-2000v2 User manual
Planet
Planet IPX-1900 User manual
Planet
Planet IPX-2500 Instruction Manual
Planet
Planet IPX-2500 User manual
Planet
Planet IPX-1500 User manual
Planet
Planet IPX-2100 User manual
Planet
Planet IPX-330 User manual
