Plantronics Explorer 100 Series User manual

Explorer 100 Series
User Guide

Contents
What's in the box 3
Headset overview 4
Pair 5
Get paired 5
Pair mode 5
Basics 6
Answer or end a call 6
Adjust the volume 6
Mute 6
Redial 6
Voice control 6
Select language 6
Pair mode 6
Charge and fit 7
Charge 7
Adjust the fit 7
Headset Features 8
Music and more 8
Decipher the lights 8
Voice prompts 8
DeepSleep mode 8
Install the app 8
Specifications 9
Support 10
2

Headset Car vent clip*
Vehicle power charger* 2-in-1 combo cable*
Micro USB cable* Optional earloop
NOTE *Accessories may vary by product.
What's in the box
3

Call button
Charge port
Headset LED (indicator light)
Power button
Volume up
Volume down
Track back
Track forward
Play/pause
Mute
Headset overview
4

The first time you power on your headset, the pairing process begins.
1Slide the power switch on. You hear "pairing" and the indicator light flashes red and blue.
2Activate Bluetooth®on your phone and set it to search for new devices.
•iPhone Settings > Bluetooth > On*
•Android Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
3Select “PLT E100 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the indicator light stops flashing.
While wearing your headset, power it on. Press and hold the Call button until you hear "pairing."
You can pair up to 2 devices to your headset.
Pair
Get paired
Pair mode
5

Tap the Call button.
Tap the Volume up or Volume down button.
During a conversation, press both the Volume up and Volume down buttons for 2 seconds
until you hear “mute on” or “mute off.”
Double-tap the Call button to call the last number you dialed.
Siri, Google Now™, Cortana Press the Call button for 2 seconds and wait for the phone prompt
to activate voice dialing, search, and other smartphone voice controls.
Press and hold the Volume up and down buttons together until you hear “welcome." Follow
the voice-guided prompts to select the headset language.*
NOTE *Language selection not available in Europe, Russia and Africa.
While wearing your headset, power it on. Press and hold the Call button until you hear "pairing."
You can pair up to 2 devices to your headset.
Basics
Answer or end a call
Adjust the volume
Mute
Redial
Voice control
Select language
Pair mode
6

It takes 2 hours to fully charge the headset; the indicator light turns off once charging is
complete.
The universal-fit eartip has a thin loop that bends to gently tuck into the contours of either ear. To
adjust the fit, you can rotate the eartip on the headset or add the optional clip-on earloop.
Charge and fit
Charge
Adjust the fit
7

Listen to your music, podcasts, navigation and other streaming audio on your headset.
Play or pause audio
Press both Volume buttons at the same time.
Skip to next track
Press the Volume up button for 2 seconds.
Play previous track
Press the Volume down button for 2 seconds to restart current track. Press the button twice
(each button press 2 seconds) to go to previous track.
Your headset has an indicator light that flashes in response to a change in status or after a
button press.
Some examples of what you will see are:
• Solid red until charging complete and then solid blue
• Flashing red and blue during pairing
• Double red flash when battery low
• Double blue flash at incoming call
Your headset tells you about status changes. For example:
“Power on”
“Pairing successful”
"Phone 1 connected"
“Talk time (x) hours”
“Mute on”
"Answering call"
“Recharge headset”
If you leave your headset powered on but out of range of your paired phone for more than 120
minutes, your headset will conserve its battery power by entering into a DeepSleep®mode.
Once back in range with your phone, press any button to exit DeepSleep mode. If your phone is
also ringing, tap the Call button again to answer your call.
Get the most from your headset by installing our free mobile app, Plantronics Hub for iOS/
Android. Explore all of your headset's features, view instructions, and contact Plantronics support
easily from your smartphone.
plantronics.com/apps
Headset Features
Music and more
Decipher the lights
Voice prompts
DeepSleep mode
Install the app
8

Talk Time Up to 7 hours
Standby Time Up to 11 days
Operating Distance
(Range)
Up to 33 feet (10 meters) from phone or table, Class II
Headset Weight 7.8 grams
Charge Connector Micro USB charging
Battery Type Rechargeable non-replaceable lithium ion polymer
Charge Time
(Maximum)
2 hours for full
DeepSleep mode Provides up to 180 days
Power
Requirements
5V DC – 150 mA
Bluetooth Version Bluetooth v4.1
Bluetooth Profiles Hands-Free Profile v1.6 (HFP), Headset Profile v1.2 (HSP), Simple Secure Pairing
(SSP)
Moisture Protection No
Operating
Temperature
32°F - 102°F (0 - 40°C)
Storage
Temperature
32°F - 102°F (0 - 40°C)
Charging
Temperature
32°F - 104°F (0 - 40°C)
Specifications
9

EN
0800 410014
FI
0800 117095
NO
80011336
AR
[phone]*
FR
0800 945770
PL
[phone]*
CS
[phone]*
GA
1800 551 896
PT
800 84 45 17
DA
80 88 46 10
HE
[phone]*
RO
[phone]*
DE
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz 0800 932 340
HU
[phone]*
RU
8-800-100-64-14
[phone]*
EL
[phone]*
IT
800 950934
SV
0200 21 46 81
ES
900 803 666
NL
NL 0800 7526876
BE 0800 39202
LUX 800 24870
TR
[phone]*
*Support in English
For warranty details, go to plantronics.com/warranty.
Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc. Plantronics BV
345 Encinal Street
Santa Cruz, CA 95060
United States
South Point Building C
Scorpius 140
2132 LR Hoofddorp, Netherlands
©2016 Plantronics, Inc. DeepSleep and Plantronics are trademarks of Plantronics, Inc. registered in the US and other countries. Explorer, Find MyHeadset,
Plantronics Hub and PLT are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under
license. Apple, the Apple logo, iPhone, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademark are the
property of their respective owners.
Patents: US 9,264,792; D717,771; patents pending.
206923-06 (04.16)