Plantronics EXPLORER 220 BLACK User manual

Plantronics EXPlorEr™220
BlUEtootH®HEaDsEt
USER GUIDE
75656-01 (12-06)

WELCOME
Thank you for purchasing a Plantronics headset.
Let us provide you with the best possible service and technical support.
After reviewing this user guide, if you need additional assistance or
have any product questions, please contact:
•Plantronics Technical Assistance Center at 866-363-BLUE (2583)
•www.plantronics.com/support
Please refer to the separate Safety Instructions booklet for
important product safety information prior to installation or use of the
product.
REGISTER YOUR PRODUCT ONLINE
Visit www.plantronics.com/productregistration to register your product
online so we can provide you with the best possible service and
technical support.
TABLE OF CONTENTS
Package Contents & Features 3
Charging & Powering 3
Pairing 4
Adjusting Fit 6
Using Your Headset 7
Indicator Lights 8
Accessories 9
Troubleshooting 9
Product Specifications 10
Warranty 10
Regulatory Notices 11
Technical Assistance 12

3
PACKAGE CONTENTS & FEATURES
Indicator light
Call control
button
Microphone
Adjustable ear
loop
Ear tip
Charging jack
AC power adapter Volume control
POWERING
2
1
Before using, you must first charge your
headset.
20 minutes = minimum charge
2 hours = full charge
Light is solid red when battery is charging.
NOTE For the best user experience, keep
your headset fully charged.
CAUTION Do not use headset while
charging and do not connect the charger
while the headset is in use.
Press the control
button for 2
seconds to power
on. Press the
control button
for 3 seconds to
power off.
CHARGING & POWERING
CHARGING

4
PAIRING
Step One:
Prepare Phone—
Turn on Bluetooth
For most phones, go
to Settings/Tools menu
and select Bluetooth or
Connectivity and select
“On.” (Or see the user
guide for your phone.)
SETTINGS
SETTINGS
Time and Date
Phone Settings
Bluetooth
Sound Settings
Network Services
Security
Reset Settings
BLUETOOTH
Discover/
Search
BLUETOOTH
220Plantronics
Headset Passkey
PASSKEY
0000
This headset comes with QuickPairTM technology so pairing with your
Bluetooth phone is even easier. Follow the instructions below to pair your
phone with your headset for the first time.
Step Two:
Prepare Headset—
Pairing Mode
Begin with headset
turned off. Turn
headset on (hold call
control button for four
seconds until the light
flashes blue) and it will
automatically go into
pairing mode, flashing
red and blue.
Step Three:
Pairing—
Add Headset to Phone
For most phones,
go to Settings/Tools
> Bluetooth > Search
or Add a Device, then
Select “220Plantronics.”
For passkey enter
0000. Headset will
flash blue when paired
successfully. It is now
powered on and ready
to use.
NOTE: Normally you only need to pair the headset and handset once. If
headset has been previously paired with another device, follow pairing
instructions on the next page.
QUICKPAIR FEATURE INSTRUCTIONS

5
220
If headset has been previously paired with another device, please
follow these instructions for pairing a second time. Be sure the
headset is fully charged. For set up and pairing instructions with other
Bluetooth devices, please consult your Bluetooth device user guide or
visit www.plantronics.com/easytopair, an online, interactive pairing
guide for phones and headsets.
Begin with headset turned off.
1. Press and hold down the call
control button for 8 seconds
until the headset status
indicator begins to flash blue
then red.
The headset is now in pairing
mode for the next 120
seconds.
1. 2.
3.
PAIRING
2. While the headset is flashing,
use the phone menu to
search for Bluetooth devices
and select “220Plantronics.”
3. When prompted for a
passkey, enter 0000. Headset
will flash blue when paired
successfully.
NOTE: The headset can pair to multiple Bluetooth devices, but will only
connect to one device at a time. The headset will automatically connect
to the last device to which it was connected.