Plantronics M3000 User manual

Plantronics Ltd - Released
T68 M3000 pair rev002 1 24
th
July 2003
M3000 Pairing Instructions – Sony Ericsson T68 Mobile Phone
Before pairing the Plantronics M3000 with the Sony Ericsson T68, please ensure
both devices are fully charged according to the instructions in the respective User
Guides.
1. Turn the Sony Ericsson T68 phone and the Plantronics M3000 headset ON.
2. On the T68, using the Joystick:
i. Select “Connect” and press the joystick.
ii. Scroll down to “Bluetooth” and press the joystick
iii. Scroll down to “Operation Mode”, and press the joystick
iv. Scroll down to “On” and press the joystick.
Bluetooth is now be switched on in the phone.
Note: If Bluetooth has already been activated, press the “No” Key (End Call
button).
3. On the Plantronics M3000:
i. Put the M3000 into pairing mode by press the “Volume Up” &
“Call Control” buttons simultaneously until the Indicator light
begins to flash alternate green and red. (see M3000 User
Instructions).
4. On the Sony Ericsson T68 under “Bluetooth” menu:
i. Scroll down to “Paired Devices” and press the joystick
ii. The phone will display “Add Device”. Press the joystick.
iii. Scroll to “Phone initiates” and press the joystick.
iv. Scroll to “Headset” and press the joystick.
v. The phone will display “Searching”
vi. After a few moments the phone will display all the Bluetooth
devices within range. Select the “M3000 by Plant” and press
the joystick.
vii. The phone will request the “Passkey:”. Enter 0000 using the
keypad then press the joystick. The phone will display
“Pairing” followed by “Pairing Successful”.
viii. The phone will show “Name Tag:” M3000 by Plantronics.
Press the joystick.
ix. The phone will show “Added to Paired Devices”
x. Use the “No” Key (End Call button) to return to the main
menu.
Your M3000 headset is now paired with the T68 phone.

Plantronics Ltd - Released
T68 M3000 pair rev002 2 24
th
July 2003
Making and Accepting Calls
To accept an in-coming call via the M3000 Headset
1. An in-coming call will cause both the phone and the headset to ring.
Note that there may be a delay of a few seconds between the phone
ringing and the headset starting to ring.
2. When you hear the ringing tone in the M3000 headset, press the “Call
Control” button to answer the call.
If you press the “Call Control” button before the headset starts to ring the
call may not be answered and an error tone will sound in the headset.
Once you hear this tone you can then press the “Call Control” button to
pick up the call.
To end a call via the M3000 Headset
The call can be ended either by pressing the “Call End / No” key on the
T68 or by pressing the “Call Control” button on the M3000.
To place a call using the keypad:
1. Dial the number as normal and press the “Call” key on the T68. The
audio will automatically be transferred to the headset.
To place a call using Voice Dialing with the M3000 Headset:
NB: Before using the M3000 for voice dialling, ensure that you have
followed the instructions in the Sony Ericsson T68 User Guide for voice
dialling, and that you have recorded the names of the contacts you wish to
call via voice dialling. Place a test call from the T68 using voice dialling to
ensure that it is working before using the M3000 headset.
1. Press and hold the “Call Control” button on the M3000 until you hear a
beep in the headset. After a moment you will hear another beep in the
headset as a prompt for voice dialling and the phone display will show
“After the tone, say a name or command”
2. State the name of the contact you wish to dial and the call will be
placed.