Playcraft HDPE Half Wall R5 User manual

IMPORTANT NOTES: Read First
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
HDPE HALF WALL R5
INSTALLATION INSTRUCTIONS
Rev A
9/1/2012
R5-1309-HDPE
Page 1 of 3
R5-09 Collars and R5-11 Clamps
Figure 1.1
See Installation Manual Sections
Figure 1.2
Refer to Installation Manual for R5-09 Collars and R5-11 Socket Clamps installation instructions.
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B)
FIGURE 1
HDPE Half Wall

For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
HDPE HALF WALL R5
INSTALLATION INSTRUCTIONS
Rev A
9/1/2012
R5-1309-HDPE
Page 2 of 3
Step 1
Locate and attach collars at height shown in
Elevation View. (See Note B)
* Height shown from top of deck to top of collar.
Step 3
Attach Half Walls to deck as shown in Figure 1.2.
(See Note A)
Step 4
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 2
Attach Half Walls to posts as shown in Figure 1.1.
(See Notes A & B)
Elevation View
39"
991mm
3/8" x 1" Button
FLAT PANEL BRACKET (R5)
Barrel Nut
3/8" x 5/8"
Washer
1/2" SAE
Button Head Bolt
3/8" Lock Nut
3/8" x 1-1/4"
Washer
3/8" x 1" O.D.
Washer
3/8" x 1" O.D.
Head Bolt
Figure 1.2
HALF WALL
3/8" x 1" O.D.
Washer
Figure 1.1
1/2" SAE
HALF WALL
MOUNTING LUG
Washer
3/8" x 1-3/8"
Shoulder Bolt

Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
HDPE HALF WALL R5
INSTALLATION INSTRUCTIONS
Rev A
9/1/2012
R5-1309-HDPE
Page 3 of 3
Parts List Specifications
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
Part # DESCRIPTION QTY.
AF-7118 Flat Panel Bracket (R5) 2
EF-8103 Half Wall R5-HDPE 2
GF-7007 Mounting Lug R5 2
HS-1001-R5 Socket Clamp Set R5 2
9103052-TR Bolt Button Head 3/8" x 1" 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 2
9143062-TR Bolt Shoulder 3/8" x 1-3/8" BH 2
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 8
9345002 Washer Flat SAE 1/2" 6
9413002 Nut Lock 3/8" 2
9443022-TR Nut Barrel 3/8" x 5/8" BH 4
HALF WALL R5:
Shall be made from high density 3/4" sheet plastic
specially formulated for optimum UV stability and
color retention.
MOUNTING LUGS:
Shall be precision die-cast from a high-strength
aluminum alloy. The Mounting Lugs have a
multi-stage baked-on powder coat finish.
SOCKET CLAMPS:
Shall be two-part and precision die-cast from a high
strength aluminum alloy. The Socket Clamps have a
multi-stage baked-on powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.