Playcraft PTVALWAB08-Valencia User manual

ASSEMB
LY INSTRUCTIONS
MODEL:PTVALWAB08-Valencia

assistance.
1) Your table is designed for use indoors in a climate controled environment only.
Damage can occur if the table is exposed to water, dampness, high humidity,
freezing temperatures, etc.
2) Professional assembly is strongly recommended. This assembly manual is intended to
guide an experienced slate pool table installer with the assembly process of this
for which the process is the same regardless of the cabinet type.
2) The pool table cabinet and slate are extremely heavy. Two or more people are
required for assembly.
or serious injury.
5) Only use the table for its intended purpose.
6) Damaged or worn parts may be dangerous for users and the integrity of the table.
will void the warranty.
8) Check all screws, bolts, etc. on a regular basis to ensure that they are in good working
as required with owning a slate pool table
Rio Grande

PARTS LIST
NO. IMAGE DESCRIPTION SPECIFICATION QTY UNIT
①
LONGITUDINAL BEAM 2180*100*83 2 PCS
ASSEMBLY POSITION FRAME
②
SHORT BEAM 1067*100*118 2 PCS
ASSEMBLY POSITION FRAME
③
LONGITUDINAL
CENTRE BEAM 2064*80*40 1 PC
ASSEMBLY POSITION FRAME
④
MIDDLE BEAM 997*120*40 2 PCS
ASSEMBLY POSITION FRAME
⑤
WOODEN CONNECTOR
FOR THE TABLE FRAME 220*50*32 4 PCS
ASSEMBLY POSITION FRAME
⑥
TABLE LEG 1068*451*647 2 PCS
ASSEMBLY POSITION FRAME
⑦
805*1295*40 1 PC
ASSEMBLY POSITION TOP RAIL
MIDDLE SLATE 805*1295*40 1 PC
ASSEMBLY POSITION TOP RAIL
SIDE SLATE 2 805*1295*40 1 PC
ASSEMBLY POSITION TOP RAIL
⑧
1 PC
ASSEMBLY POSITION TOP RAIL
⑨
LONG RAIL 2562*163*160 2 PCS
ASSEMBLY POSITION TOP RAIL
⑩
SHORT RAIL 1443*163*160 2 PCS
ASSEMBLY POSITION TOP RAIL
CLOTH /

HARDWARE LIST
NO. IMAGE DESCRIPTION SPECIFICATION
QTY
UNIT
H1
HEX BOLT ø10*130 8 PCS
FOR WOODEN CONNECTOR AND CROSS BEAM ASSEMBLY
POSITION
H2
FLAT WAHER M10*30*2 16 PCS
FOR WOODEN CONNECTOR AND CROSS BEAM ASSEMBLY
POSITION
H3
HEX BOLT ø12*130 8 PCS
FOR CROSS BEAM ASSEMBLY
POSITION
H4
FLAT WAHER M12*30*2 16 PCS
8PCS FOR THE CROSS BEAM AND 8PCS FOR CROSS BEAM AND
LEG
ASSEMBLY
POSITION
H5
BOLT NUT M10 8 PCS
FOR WOODEN CONNECTOR AND CROSS BEAM ASSEMBLY
POSITION
H6
SEMICIRCLE SCREW NUT M12 8 PCS
USED TO FIX THE CROSS BEAM ASSEMBLY
POSITION
H7
FLAT HEAD SCREW 4.2*45 8 PCS
USED TO FIX THE MIDDLE BEAM ASSEMBLY
POSITION
H8
HEXAGON BOLT ø12*75 8 PCS
FOR CROSS BEAM AND TABLE LEG ASSEMBLY
POSITION
H9
ADJUSTABLE SCREW ø10*75 16 PCS
USED TO ADJUST AND LEVEL THE SLATE ASSEMBLY
POSITION
H10
RUBBER SHIM 2mm*2pcs
3mm*2pcs 4 PCS
TO ADJUST THE TABLE LEG ASSEMBLY
POSITION
H11
WOODEN SCREW 12 PCS
FOR SLATE AND TABLE FRAME ASSEMBLY
POSITION
6*60

H12
BARREL NUT ø8*30 4 PCS
FOR THE LONG AND SHORT RAIL ASSEMBLY
POSITION
H13
DOUBLE HEAD BOLT ø8*80 4 PCS
FOR THE LONG AND SHORT RAIL ASSEMBLY
POSITION
H14
SEMICIRCLE WASHER M8 4 PCS
FOR THE LONG AND SHORT RAIL ASSEMBLY
POSITION
H15
FLAT WAHER M8*25*1.5 4 PCS
FOR THE LONG AND SHORT RAIL ASSEMBLY
POSITION
H16
BOLT NUT M8 4 PCS
FOR THE LONG AND SHORT RAIL ASSEMBLY
POSITION
H17
METAL CONNECTOR / 4 PCS
FOR THE LONG AND SHORT APRON ASSEMBLY
POSITION
H18
ALLEN BOLOT M6*16 16 PCS
FOR THE LONG AND SHORT APRON ASSEMBLY
POSITION
H19
HEX BOLT ø10*60 18 PCS
USED TO FIX THE TOP RAILS AND SLATE ASSEMBLY
POSITION
H20
DOME WASHER ø10*35*5 18 PCS
USED TO FIX THE TOP RAILS AND SLATE ASSEMBLY
POSITION
H21
LEATHER POCKET / 4 PCS
ASSEMBLY
POSITION
H22
LEATHER POCKET / 2 PCS
ASSEMBLY
POSITION
H23
FLAT HEAD SCREW 4.2*16 12 PCS
FOR POCKET AND SLATE BACKER ASSEMBLY
POSITION
H24 TOUCH-UP-MARKER PEN 1 PCS

Code #
Attention: There are some code number(#--#) writing on both bottom ends of each short and long
rails, please connect 2 rail ends together correspondingly with the same code # by sequence in
order to avoid some big gap between each 2 ends.