Playcraft Mounting Lug R35 User manual

Shoulder Bolt
See Note B
Washer
Socket
Clamp
Assembly
See Assy.
Pg. R3.5 - 11
MOUNTING
LUG R35
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
MOUNTING LUG ASSEMBLY R3.5 - 12
Rev B
Page 1 of 2
Mounting Lug
Application

A) More detailed instructions will be supplied with
the specific components being installed on your play
system.
B) Note that the length of the Shoulder Bolt varies
depending upon the application.
Step 1.
Attach Collar Halves to Post. Refer to Collar
Assembly Page R3.5 - 09.
Step 2.
Attach Socket Clamp Assembly to Collar. Refer to
Socket Clamp Assembly page R3.5 - 11.
Step 3.
Attach the activity to the Mounting Lug using the
hardware as specified for the specific application.
Step 4.
Snug tighten all fasteners.
Step 5.
Check to ensure proper placement of the activity
and make adjustments if necessary.
Step 6.
Apply liquid thread lock and fully tighten all fasteners
according to the "TIGHTENING TORQUE FOR
HARDWARE" Section of the Installer's Manual.
Maintenance
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Parts List
008113 Mounting Lug R35
MOUNTING LUG:
Shall be precision die-cast from a high strength
aluminum alloy. The Mounting Lug has a multi-stage
baked-on powder coat finish.
Specifications
1
Installation
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
MOUNTING LUG ASSEMBLY R3.5 - 12
Rev B
Page 2 of 2