Playcraft Revolution Post Top Cap User manual

IMPORTANT NOTES: Read First
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
REVOLUTION POST TOP CAP
INSTALLATION INSTRUCTIONS
Rev A
4/1/2011
RV-21000
Page 1 of 2
NOTE: Revolution Post Top Cap shown.
Other configurations will vary slightly, but
does not affect assembly.
FIGURE 1
Revolution Post Top Cap
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.

Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
REVOLUTION POST TOP CAP
INSTALLATION INSTRUCTIONS
Rev A
4/1/2011
RV-21000
Page 2 of 2
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
Parts List Specifications
Step 1
Rotate Post Top Cap to desired facing and secure
as shown in Figure 2.
NOTE: Refer to Playground Equipment Manual for
suggested Post Top Cap facing.
REVOLUTION POST TOP CAP:
Shall be precision die-cast from a high-strength
aluminum alloy. The Revolution Post Top Cap shall
have a multi-stage baked-on powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Part # DESCRIPTION QTY
GH-0002 Revolution Post Top Cap 1
9271062-TR Screw Tek 1/4" x 1-1/4" BH TR 3
FIGURE 2
1/4"x 1-1/4" BH TR
Tek Screw
TOP CAP