PLUSOPTIX A12C How to use

Binocular Autorefractor
Short Manual 7
“Exporting back-ups and reports
(only plusoptiX A12C and A16)”
Plusoptix GmbH
Neumeyerstrasse 48
90411 Nuremberg
Germany
www.plusoptix.com
Edition: 09/17/2018

Seite 2 von 3
Table of Contents
1Exporting back-ups and reports.......................................................................................3
List of figures
Figure 1: Data export............................................................................................................. 3
This manual is a supplementary short manual. For general information about your
Plusoptix device, such as its intended use, basic handling, technical information,
maintenance, service, and warranty information, please refer to the user manual that
was delivered with your device. This user manual can also be downloaded on our
homepage www.plusoptix.com, under support.
List of further supplementary short manuals
1. Adjusting settings and setting up WLAN
2. Preparing and performing a measurement
3. Viewing the measurement results
4. Entering, retrieving or deleting patient data
5. Documenting measurement results electronically
6. Documenting measurement results on paper
7. Exporting back-ups and reports (only plusoptiX A12C and A16)
8. Downloading software updates
9. Troubleshooting malfunctions and measuring interruptions

Seite 3 von 3
1 Exporting back-ups and reports
In the plusoptiX A12C and A16 model, all patient data and measurement values are archived
in a database on the internal memory of the Plusoptix Binocular Autorefractor. Back-up
copies of this database can be saved for safety, and CSV tables can be saved for evaluation
and reporting purposes.
Note:
To avoid a loss of data, we recommend regularly making a back-up copy.
Press the button (1) in the settings. Select the file format you want for the data export:
CSV tables can be edited with all conventional spreadsheet programmes.
DB files are intended as back-up copies and can be used to restore the
database.
To restore the database, connect the USB storage with the exported db file in its
directory “db” to the Plusoptix device. You will be asked whether the saved
database should be restored. If there are several database in the main directory
of the SD card, the most up-to-date (by save date) will be restored.
Note:
When you restore a database, a back-up copy of the internal database will first
be saved to the USB stick. Then, the internal database will be overwritten by the
restoring database. The two databases will not be merged.
If an USB stick is connected, a back-up copy will be saved to the USB stick in the selected
format. If no USB stick is connected, a back-up copy will be saved in the selected format to
a transfer directory. This can be reached by following URLs:
plusoptiX A12: URL:\\px12-xxxx\transfer\
plusoptiX A16: URL:\\px16-xxxx\transfer\
The “xxx” place marker stands for the last four numbers of the serial number. You will have
access through the released transfer directory.
1)
Location:
USB storage,
directory “db”
Location:
Transfer
directory
X
Figure 1: Data export