Polar Electro Fitwatch T31 User manual

Polar T31
Polar T31 coded™
Getting Started Guide
17953903.01 05/2017
Find product support
http://www.polar.com/en/
support/T31_coded_transmitter
Compatible with
1.
2.
GymLink
ENGLISH
Thanks for choosing Polar! In this guide we’ll walk you through the basics of
using your new heart rate sensor.
You can download the latest version of this guide at polar.com/support.
WEARING THE HEART RATE SENSOR
1. Fasten one end of the heart rate sensor to the elastic strap (picture 1).
2. Moisten the two grooved areas on the back (picture 1).
3. Clip the heart rate sensor around your chest and adjust the strap to t snugly
(picture 2).
4. Check that the wet grooved areas are rmly against your skin, and that the
text on the heart rate sensor is in an upright position and at the center of
your chest.
After training, rinse the heart rate sensor and the strap under running water.
For more detailed instructions, visit polar.com/support.
USING THE HEART RATE SENSOR
You can use your heart rate sensor with many Polar training devices. Check the
compatible devices at polar.com/support.
Your heart rate sensor is designed for all weather conditions. It is fully water
resistant and it picks up your heart rate even while swimming. The coded heart
rate transmission of T31 coded™ prevents cross-talk from other heart rate
sensors for accurate measurement of your training.
CARING FOR YOUR HEART RATE SENSOR
Heart rate sensor: Rinse under running water after every use. Clean with mild
soap and water when needed. Wipe dry with a soft towel. Do not bend the
sensor, since it may damage the electrodes.
Never store the heart rate sensor wet, in a damp environment or in any kind
of non-breathing material, such as a plastic bag or a sports bag. Sweat and
moisture may keep the electrodes wet and the heart rate sensor activated. This
will shorten the battery life. Keep in a cool and dry place.
Strap: Rinse under running water after every use. Wash regularly in a washing
machine at 40°C/104°F. Use a washing pouch.
You can nd more detailed caring instructions at polar.com/support.
TECHNICAL SPECIFICATION
Battery life Average 2500 hours
Heart rate sensor material Polyurethane
Strap material Polyurethane, Fabric: 50% nylon, 20% polyester,
30% spandex
The battery of your heart rate sensor can’t be changed. To buy a new sensor,
contact your authorized Polar Service or retailer. You can also buy sensors
online. Go to www.polar.com to nd your own country’s shoppolar online store.
Manufactured by
Polar Electro Oy
Professorintie 5
FI-90440 KEMPELE
Tel [phone]
Fax [phone]
www.polar.com