POLTI Vaporetto Lecoaspira 710 Kit Parts list manual

ESPRESSO
2000
ESPRESSO
SUPERAUTOMATIC
ESPRESSO
AUTOMATIC
ESPRESSO
3000
VAPORELLA STIRA E ASPIRA LUXPRO
FE 503FE 701-700FE 603FE 901-900
FOREVER 1000
SUPER PRO LUX
FOREVER SUPER PRO
5100 R
4500 R 4200 R
2H PROFESSIONAL
PROF 1000
PROF 3000 R INOX 1000
PROF 1200
PROFESSIONAL
STIROSMACCHIA
FOREVER CLEAN
710 KIT
aspira

ECO PRO 3000
ECO PRO 3000 LUX
2400
HUMIDIFIER FA 20
IONO-HUMIDIFIER FA 30
DRYER FA 110
ECO PRO 3300 PLUS 2001R
2300
2085 2300 IT PRO
1300 1000
910 IT
VAPORETTINO 900
910
AS 404 AS 610 AS 600
AS 300 AS 310 E
AS 800
AS 810
A
S
P
I
R
A
Q
Q
W1 XY
B3
B2
W
W
Z
C
T
E1
C
F
E2
E1
D
C
E
E3
E4
Q M
K
R
S
J
C
L
A2
B3
B1
B2
A5
A1
A4
A3
U
P
O
C
N
V
Vtt LECOASPIRA 710 KIT - Cod.M0S05348 - Edizione 1G07
E5
G
24
25
26
12
8
6
10
7
911
23
17
2 1
4 5 3
27
13
14
15
16
18
19
22
20
20-A
Vtt.LECOASPIRA 710 KIT - Cod. M0S05652 - Edizione 1G12

ENGLISH Vaporetto Lecoaspira 710 Kit
710 K I T
aspira
KEY TO ACCESSORIES
A1) Fitting for connecting accessories
A2) Handle
A3) Safety button
A4) Suction button
A5) Steam button
B1) Steam+suction hose
B2) Monobloc plug
B3) Locking button of the monobloc plug
C) Button for locking accessories in place
D) Flexible steam + suction tube
E) Universal brush
E1) Slides for locking fittings into place
E2) Bristled accessory
E3) Liquid-suction accessory
E4) Carpet accessory
E5) Cotton cloths
F) Joker brush
G) Parquet accessory
J) Steam-suction window-cleaning accessory
K) 120°steam-suction accessory
L) Small coloured 120°steam-suction brushes
M) 120°steam-suction accessory
upholstery nozzle
N) Small steam-suction upholstery nozzle
O) Window-cleaning fitting for small
steam-suction upholstery nozzle
P) Bristle fitting for small steam-suction
upholstery nozzle
Q) Upholstery nozzle
R) Nozzle
S) Radiator brush
T) Cleaning brush
U) Filler bottle
V) Spare gaskets
W) Iron
W1) Continuous steam button
X) Steam request button
Y) Temperature control knob
Z) Iron mat
20-A) Water container cleaning brush
Polti S.p.A. reserves the right to change
equipment or accessory specification without
prior notice.
KEY
1) Main switch
2) Boiler switch
3) Lamp indicating lack of water
4) Pressure indicator lamp
5) Suction UP indicator lamps
6) Carrying handle
7) Sealing cap of the self-filling tank
8) Steam control knob
9) Flap of the built-in socket
10) Built-in socket
11) Air outlet grill
12) Pivoting wheels
13) Power supply cable
14) Supply cable canal
15) Supply cable storage
16) Accessories holder
17) Air outlet filter
18) Unhooking lever for air outlet filter
19) Air outlet filter holders
20) Water container
21) MAX level (fig.5)
22) Water container handle
23) “EcoActive Filter”water-based
filter assembly
24) Lid of the “EcoActive Filter”
water-based assembly
25) Shaped filtering sponge
26) Filter body with microholed net
27) Elbow tube

Vaporetto Lecoaspira 710 Kit ENGLISH
Dear Customer,
We wish to thank you for placing your trust in us and choosing this a Polti product.
In choosing your Vaporetto Lecoaspira 710 Kit, you were thinking of the hygiene
of your home and of the health of your family, because the Vaporetto Lecoaspira
710 Kit lets you clean all kinds of surfaces with the pure power that steam pro-
vides. It dissolves and collects the dirt and traps dust-mites and allergens in the
water.
Thanks to the EcoActive-Filter, once you have finished your cleaning you will be
able to pour away the dirty water with no danger of releasing dust back into the
atmosphere.
The air-filtering system is completed by the air outlet filter, which retains the fine
particles, so that the output air is thoroughly cleaned.
Thanks to the complete set of accessories, you will be able to tackle all your
cleaning problems, solving them effortlessly and saving time.
The controls of the equipment are also available on the handle so that they are
right there within easy reach, without having to bend down.
With Vaporetto Lecoaspira you will be able to use steam and suction together for
a complete clean, suction alone so as to collect all the dust efficiently, or steam
alone for specific cleaning tasks.
We strongly recommend reading this instruction booklet carefully before using the
Vaporetto Lecoaspira.
What is the EcoActive-Filter?
The EcoActive-Filter is a revolutionary water-based filter. EcoActive-Filter uses the
natural purifying property of water to capture the dirt, thus avoiding unpleasant
contact with the dust and its harmful dispersion into the environment. It is preci-
sely the flow of water contained in the special filter and its bubbling that make
cleaning done with Vaporetto Lecoaspira 710 Kit so efficient.
This unit conforms with EC-directives 89/336 as amended by 93/68
(EMC) and 73/23 as amended by 93/68 (low voltage).

ENGLISH Vaporetto Lecoaspira 710 Kit
CC
CCOO OORR RRRR RREE EECC CCTT TTUU UUSS SSEE EEOO OOFF FFTT TTHH HHEE EE PP PPRR RROO OODD DDUU UUCC CCTT TT
This appliance is intended for use as a steam generator and
for sucking liquids and solids as described and in
accordance with the instructions provided in this manual.
Please read these instructions carefully and keep them, as
you may find them useful in future.
PP
PPRR RREE EEPP PPAA AARR RRAA AATT TTII IIOO OONN NNFF FFOO OORR RRUU UUSS SSEE EE
•Unscrew the self-refilling tank cap (7) (Fig.1) and fill the
tank with about 560 cc of water by using the bottle (U)
supplied.
Vaporetto is an environmentally-friendly, hygienic and
natural way of cleaning, avoiding the use of cleaning
chemicals which can be toxic and harmful to the
environment. Vaporetto turns water to a powerful natural
cleaning medium: steam at steady pressure and at ideal
temperature for best cleaning results.
•Carefully screw on the safety cap (7) to hand tight.
•Lift the water container handle (22) unhooking it from its
position (Fig. 2) and remove the container (20) (Fig. 3)
•Turn the container handle (22) as indicated in figure 4, so
as to remove the “Eco ActiveFilter”water filter assembly
(23).
•Fill the water container (20) with about 1,2 litres of simple
tap water until the MAX level indicator (21) is reached, as
in fig. 5.
•Put the filter assembly (23) back into place in the water
container (20) returning it to its initial position.
•Replace the water container back into position.
•Support the handle (22) until it hooks into its place on the
water container (20).
U
US SO OC CO OR RR RE ET TT TO OD DE EL LP PR RO OD DO OT TT TO O
P
PR RE EP PA AR RA AZ ZI IO ON NE EA AL LL L’ ’U US SO O
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
MAX

Vaporetto Lecoaspira 710 Kit ENGLISH
OO
OOPP PPEE EERR RRAA AATT TTII IIOO OONN NN
Operation with steam + suction
Connect the plug to the mains.
•Press the main switch (1), the first level of suction indicators (5) will start to flash.
•Press the boiler switch (2) which will light up.
•Wait for the pressure indicator lamp (4) to light up. When it does the Vaporetto
Lecoaspira will be ready to generate steam.
•Open the flap of the built-in socket (9); fit the monobloc
plug (B2) into place by pressing the locking button (B3)
(Fig. 6).
Note: The handle (A2) has a safety button (A3) which
when set in locked position prevents activation of
the delivery of steam. If the appliance is left
temporarily unattended while it is in an activated
condition, please remember to place the safety
button (A3) in the locked position.
To resume delivery, return the button to its initial position.
•Press the suction button (A4) on the handle (A2). The suction function will start up at
the minimum speed and the first stage of the indicator lamp set (5) will stop flashing
and remain on. For correct use of the suction function read the section “Suction control/
switching off”.
•You can supply steam by pressing the steam button (A5) on the handle. At the same
time you can also control suction by pressing the suction button (A4).
Operation with suction only
•If you wish to use the suction function only, press the main switch (1), the first level of
the suction indicators (5) will start to flash.
•Open the flap of the built-in socket (9); fit the monobloc plug (B2) into place by pressing
the locking button (B3) (Fig. 6).
•By pressing the suction button (A4) on the handle (A2), the suction fan will start to run
at the lowest speed and the first stage of the indicator lamp (5) will stop flashing and
remain steadily lit. For correct use of the suction read the section “Suction
control/switching off”.
Operation with steam only
•Press the main switch (1), the first level of the suction indicators (5) will start to flash.
•Press the boiler switch (2) which will light up.
•Wait for the pressure indicator lamp (4) to light up. When it does, the Vaporetto
Lecoaspira will be ready to generate steam.
•Open the flap of the built-in socket (9); fit the monobloc plug (B2) into the socket by
pressing the button (B3) (Fig. 6)
•You may now deliver steam by pressing the steam button (A5) on the handle.
•If you decide not to use the steam anymore, you may switch off the boiler by pressing
the boiler switch (2).
F
FU UN NZ ZI IO ON NA AM ME EN NT TO O
Fig. 6

FF
FFII IILL LLLL LLII IINN NNGG GG TT TTHH HHEE EEBB BBOO OOII IILL LLEE EERR RR
Thanks to the self-filling function, there is no longer any need to stop and wait while the
boiler fills up again.
When the water inside the boiler reaches its low level, the level probe will automatically
activate a pump that will fill the boiler from the tank.
When there is no more water left in the self-filling tank, this will be shown by the indicator
lamp (3) and you will also be warned by an audible signal.
In order to continue working, proceed as described in the section on "Preparation for use".
CC
CCOO OONN NNTT TTRR RROO OOLL LLOO OOFF FFTT TTHH HHEE EESS SSTT TTEE EEAA AAMM MMFF FFLL LLOO OOWW WW
Vaporetto Lecoaspira will enable you to optimise the steam
flow by means of the control knob (8) (Fig. 7). To obtain a
higher flow rate turn the knob in a clockwise direction. When
the knob is turned in an anti-clockwise direction, the flow rate
will decrease.
High flow rate of steam: for caked dirt, stains, sanitising,
grease;
Normal flow rate of steam: for wall-to-wall and loose car-
peting, windows, floors;
Low flow rate of steam: for spraying plants, cleaning deli-
cate fabrics, wallpaper.
WARNING: Do not use steam on draylon or velvet.
SS
SSUU UUCC CCTT TTII IIOO OONN NN CC CCOO OONN NNTT TTRR RROO OOLL LL// //SS SSWW WWII IITT TTCC CCHH HHII IINN NNGG GGOO OOFF FFFF FF
You will be able to control the force of suction depending on the type of surface to be
treated. The numbers are those indicated on the control panel.
1 for curtains
2 for sofas and cushions
3 for carpets
4 for hard flooring and for collecting liquids
Use of the suction controls
Simply by pressing the suction button (A4) once you will be able to start suction.
You will be able to select the speed required for the type of surface to be treated by kee-
ping the suction button (A4) pressed. When you increase the suction power, one of the
indicator lamps (5) on the control panel will light up, and when you lower it one of the lamps
(5) will extinguish.
To turn the appliance off just press the suction button (A4).
NOTE: when you switch on the suction, the appliance will restart from the speed it was
at the time of switching off.
ENGLISH Vaporetto Lecoaspira 710 Kit
R
RI IE EM MP PI IM ME EN NT TO OD DE EL LL LA AC CA AL LD DA AI IA A
R
RE EG GO OL LA AZ ZI IO ON NE ED DE EL LF FL LU US SS SO OD DI IV VA AP PO OR RE E
R
RE EG GO OL LA AZ ZI IO ON NE EA AS SP PI IR RA AZ ZI IO ON NE E/ /S SP PE EG GN NI IM ME EN NT TO O
Fig. 7

Vaporetto Lecoaspira 710 Kit ENGLISH
SS
SSUU UUPP PPPP PPLL LLYY YYCC CCAA AABB BBLL LLEE EESS SSTT TTOO OORR RRAA AAGG GGEE EE
Before putting away the Vaporetto
Lecoaspira, store the supply cable (13) in
its compartment (15) proceeding as fol-
lows: Take out the water container (20) as
indicated in the paragraph “preparation
for use”.
Manually wind the cable evenly and put it in
the storage (15), making it go through the power supply cable canal (14) (Fig. 8).
Put the water container (20) back in its place making sure it is correctly positioned.
UU
UUSS SSEE EEOO OOFF FFTT TTHH HHEE EEAA AACC CCCC CCEE EESS SSSS SSOO OORR RRYY YY HH HHOO OOLL LLDD DDEE EERR RR
The accessories holder (16) allows you to fix the tube with
the brush mounted on it on the body of the appliance.
To secure the tube to the body of the appliance: slide the
groove on the tube into the accessories holding bracket
on the appliance (Fig. 9).
SS
SSUU UUCC CCTT TTII IIOO OONN NN OO OOFF FFSS SSOO OOLL LLII IIDD DDSS SSAA AANN NNDD DDLL LLII IIQQ QQUU UUII IIDD DDSS SS
This appliance can be used to suck up dust or liquids equally easily.
However, if the water in the filter is very dirty it should be replaced proceeding as
described in the section “Emptying and cleaning the water container”. When the dirt
sucked in reaches the maximum permitted level in the water container (20), suction is
stopped automatically by the safety float provided for this purpose (you will notice that
the engine speed has increased).
ATTENTION: switch off the appliance, and only switch on again after restoring the water
level in the tank as described in the “emptying and cleaning the water container”paragraph.
IMMEDIATE RESTART WITHOUT RESTORING THE WATER LEVEL CAN DAMAGE THE AIR
OUTLET FILTER.
Before resuming your cleaning operations, proceed as illustrated in the section “Emptying
and cleaning the water container”, and then top up the level of the water in the container.
V
VA AN NO OA AL LL LO OG GG GI IA AM ME EN NT TO OC CA AV VO O
U
UT TI IL LI IZ ZZ ZO OD DE EL LP PO OR RT TA AA AC CC CE ES SS SO OR RI I
A
AS SP PI IR RA AZ ZI IO ON NE ED DI IS SO OL LI ID DI IE EL LI IQ QU UI ID DI I
Fig. 8
V
VA AN NO OA AL LL LO OG GG GI IA AM ME EN NT TO OC CA AV VO O
U
UT TI IL LI IZ ZZ ZO OD DE EL LP PO OR RT TA AA AC CC CE ES SS SO OR RI I
A
AS SP PI IR RA AZ ZI IO ON NE ED DI IS SO OL LI ID DI IE EL LI IQ QU UI ID DI I
Fig. 9

ENGLISH Vaporetto Lecoaspira 710 Kit
BB
BBII IIOO OOEE EECC CCOO OOLL LLOO OOGG GGII IICC CCOO OO
Bioecologico is available for sanitising while using the suction function. It is a scented
antibacterial product with natural-based anti-allergenic substances. If it is added regular-
ly to the water in the water container (20) of the Vaporetto Lecoaspira, it will prevent the
proliferation of bacteria and micro-organisms and inhibit the action of allergens. In addi-
tion to assuring a sanitising action, Biecologico will eliminate smells due to the presence
of dust in the water, leaving a pleasant smell of cleanness in the room.
Use: Normally add 10 ml each time you fill the watercontainer.
Bioecologico is sold in Polti dealers or direct from our authorised Assistance Centres.
EE
EEMM MMPP PPTT TTYY YYII IINN NNGG GGAA AANN NNDD DDCC CCLL LLEE EEAA AANN NNII IINN NNGG GGTT TTHH HHEE EEWW WWAA AATT TTEE EERR RRCC CCOO OONN NNTT TTAA AAII IINN NNEE EERR RR
Switch off the appliance at the main switch (1) and discon-
nect the supply cable from the mains.
Lift the water container (20) out of its compartment by
means of the container handle (22) (Fig. 3).
Turn the handle as in picture fig. 4 and take out the “EcoAc-
tiveFilter”water filter assembly (23).
Empty the container tilting it towards the small groove
(Fig. 10).
Pull the elbow tube (27) away from the filter body with micro-
holed net (26) until it is removed (Fig. 11a).
Take all the components apart and rinse them in running
water (if the filter sponge has any tears in it, it should be
replaced. The filter can be purchased from an authorised
Polti Assistance centre).
If you wish to continue working, top up the level of the water.
Put the “EcoActiveFilter”water filter assembly (23) back into
the water container (20).
ATTENTION: make the arrow on the elbow tube (27) coin-
cide with the reference on the filter body with microholed
net (26) (Fig. 11b).
Put the water container (20) back in its place as described
in the “preparation for use”paragraph.
Note: make sure you empty the water container (20) before
putting your Vaporetto Lecoaspiraaway. One of the
great advantages of Vaporetto
Lecoaspira is precisely the fact that it is possible to put it
away clean.
B
BI IO OE EC CO OL LO OG GI IC CO O
S
SV VU UO OT TA AM ME EN NT TO OE EP PU UL LI IZ ZI IA AD DE EL LC CO ON NT TE EN NI IT TO OR RE EA AC CQ QU UA A
Fig. 10
Fig. 11a
Fig. 11b

Vaporetto Lecoaspira 710 Kit ENGLISH
TT
TTII IIPP PPFF FFOO OORR RR UU UUSS SSII IINN NNGG GG TT TTHH HHEE EEAA AACC CCCC CCEE EESS SSSS SSOO OORR RRII IIEE EESS SS
Before treating leather, special fabrics (especially draylon and velvet) or wooden surfaces
with steam, consult the manufacturer’s instructions and always proceed only after carry-
ing out a test on a hidden part or a sample. Allow the area treated with steam to dry and
then check whether any changes in colour or deformations have occurred before pro-
ceeding further, ensuring exactly the same steam power and distance as in the test.
When cleaning wooden surfaces (furniture, doors, etc.) always proceed with caution since
excessive use of steam could damage the wax, the polish or the colour of the surface to
be cleaned. It is therefore advisable to apply the steam to these surfaces only for short
periods at a time or to clean them with a cloth that has been treated with steam.
On particularly delicate surfaces (e.g. synthetic materials, enamelled surfaces, etc.) we
strongly recommend using the steam at its lowest output power. When cleaning glazed
surfaces, if the weather is particularly cold pre-heat the glass working at distance of about
50 cm away from the surface. To take care of your plants, we recommend spraying them
from a distance of at least 50 cm.
UU
UUNN NNII IIVV VVEE EERR RRSS SSAA AALL LLBB BBRR RRUU UUSS SSHH HH(( ((EE EE)) ))
The use of this brush is recommended for large surfaces such as ceramic or marble floor-
ing, wooden flooring, carpets, etc.
•Bristled accessory (E2), when the suction function alone is required.
•Liquid-suction accessory (E3), for removing moisture, suitable for smooth surfaces.
•Carpet accessory (E4), suitable for wall-to-wall carpeting and loose carpets.
The universal brush can be connected to the flexible tube by means of the extension tubes
(D) or it can be fitted directly onto the handle.
Assembly of the universal brush:
to apply the various different fittings to the universalbrush, move the two slides (E1) on
the rear of the brush outwards and apply the appropriate fitting for the type of surface to
be cleaned. To lock the fitting into place move the two slides (E1) inwards.
SS
SSTT TTEE EEAA AAMM MM-- --SS SSUU UUCC CCTT TTII IIOO OONN NNWW WWII IINN NNDD DDOO OOWW WW-- --CC CCLL LLEE EEAA AANN NNII IINN NNGG GG FF FFII IITT TTTT TTII IINN NNGG GG (( ((JJ JJ)) ))
The use of this accessory is recommended on large windows, large mirrors and smooth
surfaces in general. The steam-suction window-cleaning fitting (J) can be connected to the
flexible tube by means of the extension (D) or it can be fitted directly onto the handle (A2).
To use the steam-suction window-cleaning fitting correctly proceed as follows:
•Release steam evenly onto the surface to be cleaned in order to dissolve the dirt.
•Press the rubber wiper onto the surface to be cleaned, moving it from the top down-
wards with the suction function on.
Warning: when the weather is particularly cold, pre-heat the windows by releasing steam
from a distance of about 50 cm onto the surface to be treated.