Portech MV-3732 User manual

MV-3716 / MV-3732
VoIP GSM Gateway
User Manual
MV-3716
MV-3732
PORTech Communications Inc.

【Content】
1. Introduction........................................................................................................... 1
2. Function description............................................................................................ 1
3. Parts list ................................................................................................................ 1
4. Dimension: 37*26*10 cm...................................................................................... 2
5. Chart of the device ............................................................................................... 3
6. Web Page Setting ................................................................................................. 5
7. System Information.............................................................................................. 6
8. Dial Peer................................................................................................................ 7
8.1 Status..............................................................................................................................7
8.2 Settings...........................................................................................................................9
8.3 Prefix.............................................................................................................................13
8.4 Call Data to Server (CDR).........................................................................................17
9. Route ................................................................................................................... 21
9.1 Mobile TO LAN Settings............................................................................................21
9.2 Mobile to LAN Speed Dial Settings..........................................................................24
9.3 LAN to Mobile Settings...............................................................................................25
10. Mobile................................................................................................................ 28
10.1 Mobile Status.............................................................................................................28
10.2 Mobile Setting............................................................................................................29
10.3 Mobile / SMS Agent:.................................................................................................33
10.4 Send Bulk of SMS via Microsoft Excel..................................................................35
10.5 Use AT Command via Telnet or your program....................................................43
10.6 USSD SIM Balance Check via Telnet...................................................................45
10.7 SIM Setting ................................................................................................................47
10.8 Operator Setting........................................................................................................49
10.9 BCCH Info..................................................................................................................51
10.10 USSD (Unstructured Supplementary Service Data).........................................56
11. Network ............................................................................................................. 65

11.1 WAN Setting..............................................................................................................65
11.2 SNTP Settings...........................................................................................................66
12. SIP Setting......................................................................................................... 67
12.1 Service Domain Setting...........................................................................................67
12.2 Ports Setting..............................................................................................................69
12.3 Codec Settings:.........................................................................................................70
12.4 Codec ID Setting.......................................................................................................71
12.5 DTMF Setting ............................................................................................................72
12.6 SIP Responses .........................................................................................................73
12.7 Other Settings ...........................................................................................................75
13. STUN Setting..................................................................................................... 76
14. Update ............................................................................................................... 77
14.1 Update Firmware......................................................................................................77
14.2 Default Settings.........................................................................................................78
15. System Authority.............................................................................................. 79
16. Save Change..................................................................................................... 80
17. Reboot............................................................................................................... 81
18. Specification ..................................................................................................... 82
18.1 Protocols....................................................................................................................82
18.2 TCP/IP........................................................................................................................82
18.3 Codec .........................................................................................................................82
18.4 Voice Quality .............................................................................................................82
18.5 GSM (MV-3716/MV-3732).......................................................................................83
19. Simple Steps..................................................................................................... 84
20. Appendix: Setup MV-37x with Asterisk .......................................................... 85

-1-
1. Introduction
MV-3716/MV-3732 is a 16 / 32 channels VoIP GSM Gateway for call
termination (VoIP to GSM) and origination (GSM to VoIP). It is SIP based
and compatible with Asterisk. It can enable to make 16 / 32 calls
simultaneously from IP phones to GSM networks and GSM network to IP
phone.
2. Function description
2.1 VoIP(SIP)、GSM conversion.
2.2 50 sets of LAN->MOBILE routes setting，50 sets of MOBILE->LAN
routes setting.
2.3 Voice response for setting and status (dial in from mobile).
2.4 Series connections to save bills.
2.5 Standard SIP(RFC2543,RFC3261) protocol，
*It communicates with other gateway or PC.
3. Parts list
3.1 「MV-3716/MV-3732」main body
3.2 Power adaptor
Output 12V/9A, Input 100~240V Auto switching
3.3 Network cable
3.4 Antenna: MV-3716: 4 pcs / MV-3732: 8 pcs
3.5 Rack-mount accessories (compatible with 19“Rack)
3.6 User Manual

-2-
(3.5)
4. Dimension: 37*26*10 cm
(3.1) MV-3716
(3.4)
(3.3)
(3.1) MV-3732
(3.2) Power adapter

-3-
5. Chart of the device
1 Antenna：Antenna Connector
2. SIM Holder: Insert the SIM card as instruction and hear click sound
(the chip side down); Press the SIM to bottom with click sound to
remove the SIM card
3. PWR (Power LED)：Light up when power is normal.
1. DC 12V：Power input.
2. WAN: RJ-45 internet connector
3. LAN: For maintenance use, not for any propose

-4-
1. Dial Peer Reset Button
2. IP Reset Button:
Press this button about 10 seconds
IP restore back to 192.168.0.100
3. DHCP mode Button:
Press this button about 10 seconds and switch to DHCP mode

-5-
6. Web Page Setting
When the IP setting is done, the operator may setup all the rest
parameters via web page. Browse the IP address from Internet
Explorer (e.g. http://192.168.0.100). The following page shows up：
Enter the username and password for authentication. (Default
username=voip, password=1234). The page follows when the
username and password are correct.

-6-
7. System Information
User can see the demo system current system information like firmware
version, company… etc in this page.

-7-
8. Dial Peer
8.1 Status
1. ch: The port of GSM channel
2. grp: the group of GSM channel
3. state:
INIT/0: GSM module is initialing
IDLE/0: GSM module not register
IDLE/1: GSM module registered
M.ringback/0: Ring Back
M.dialed/0: GSM port is dialed
M.listen/0: GSM port is engaged

-8-
4. MNC: Mobile Network Code
5. SQ: Signal quality
6. Mobile: The caller number of the incoming/outgoing call to Mobile
7. dir: The Arrow shows the route to be LAN to Mobile or Mobile to LAN
a. < : LAN to Mobile
b. > : Mobile to LAN
8. LAN: the IP address of the last incoming/outgoing call from/to LAN

-9-
8.2 Settings
1. Transfer SIP Message
The Replace contact to dial peer: The default is OFF, which won’t send
the SIP message to corresponding port through Dial Peer.
If ON, all SIP messages will send to corresponding port via Dial Peer.
2. SIP Response when all busy
User can select the corresponding response while all ports are busy.
The Default is 600
600 : Busy Everywhere (default)
408 : Request Timeout
480 : Temporarily unavailable
503: Service unavailable

-10-
3. Dial Peer
Working Mode
a. OFF: To disable Dial Peer, user need to assign the port of GSM channel for the
incoming calls from LAN side (E.g. Default ch1 is 5064 port; ch2 should be 5066
port and so on)
b. Internal: to motivate Dial Peer, all incoming calls from LAN will come to dial peer
port. Dial peer will route calls to idle channels(Default: 5060 port)
c. External: All GSM Channel are controlled by external Dial peer program.
External URL External Dial peer program’s IP address and port number

-11-
Edit DialPeer.ini (External Dial Peer)
[Window]
Xpos=512
Ypos=252
Width=471
Height=399
[Info]
Total=16
[VoipIP]
1=192.168.0.100
2=192.168.0.100
3=192.168.0.100
4=192.168.0.100
5=192.168.0.100
6=192.168.0.100
7=192.168.0.100
8=192.168.0.100
9=192.168.0.110
10=192.168.0.110
11=192.168.0.110
12=192.168.0.110
13=192.168.0.110
14=192.168.0.110
15=192.168.0.110
16=192.168.0.110
[SipPort]
1=5060
2=5062
3=5064
4=5066
5=5068
6=5070
7=5072
8=5074
9=5060
10=5062
11=5064
12=5066
13=5068
14=5070
15=5072
16=5074
[RtpPort]
1=60000
2=60002
3=60004
4=60006
5=60008
6=60010
7=60012
8=60014
9=60000
10=60002
11=60004
12=60006
13=60008
14=60010
15=60012
16=60014
[PtcPort]
1=40000
2=40000
3=40008
4=40008
5=40016
6=40016
7=40024
8=40024
9=40000
10=40000
11=40008
12=40008
13=40016
14=40016
15=40024
16=40024
Total ip / port
The first
MV-378
The second
MV-378
The first
MV-378
The second
MV-378
The second
MV-378
The first
MV-378
The second
MV-378
The first
MV-378
The second
MV-378

-12-
External Dial Peer Log
You can check the Statue here
1. CH: The number for GSM port of MV-37X
2. MvIP: The IP address of MV-37X for Dial Peer connection
3. Port: The corresponding port for MV-37X
4. Sq: Signal Quality for MV-37X GSM Port:
5. State: The GSM Port Sate status
INIT/1: GSM module is initialing
IDLE/0: GSM module is not register
IDLE/1: GSM module is registered
BUSY: GSM Port is busy
LISTEN: GSM port is engaged
OFF/0: GSM module is out of working
6. Remote: The VoIP Sender’s IP

-13-
8.3 Prefix
User can setup the prefix number in 15 groups. Dial peer will route the
calls based on the prefix settings of each group
1.Group Enable
Off: The default is off.
On: Dial peer will route the calls based on the prefix settings of
each group. And Dial Peer status will show the grp
information as below.

-14-
Please click to select the group number of each channel

-15-
After setting, please click submit button

-16-
2.Group: The group number, total is 15 sets
3. Name: Fill the name of the group
4.Prefixs: Fill the local area number or prefix numbers of the group
After all settings are done, please click submit button.