CARE AND MAINTENANCE
TROUBLESHOOTING
• Always be certain electric current is turned off before cleaning this item.
• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on
fixture, as it will damage the metal finish.
• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not
wash shades in an automatic dishwasher.
Fixture does not light. 1. Fixture may be wired incorrectly. 1. Check wiring.
2. Worn or broken bulb. 2. Replace bulb.
WARRANTY
Distributor warrants products manufactured by it will be free from defects in material and
workmanship for one (1) year following the date of shipment. This warranty does not cover bulbs
or finish on outdoor product. If any of the warranted products are found by Distributor to be
defective, such products will, at Distributor’s option, be replaced or repaired at Distributor’s cost.
The parties hereto expressly agree that Buyer’s sole and exclusive remedy against the Distributor
shall be for the repair or replacement of defective products as provided herein, or, at the
Distributor’s sole option, Distributor may refund the purchase price of the products. THE
FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR
INFRINGEMENT. No affirmation of Distributor, by words or action, other than set forth in this
paragraph shall constitute a warranty. Goods which may by sold by Distributor but which are not
manufactured by Distributor are not warranted by Distributor, but are sold only with the warranties,
if any, of the manufacturer thereof. This warranty does not cover labor or other costs or expenses
to remove or install any defective, repaired or replaced product. Distributor’s warranty does not
apply to any products that have been subjected to misuse, mishandling, misapplication, neglect
(including, but not limited to improper maintenance), accident, improper installation, modification
(including, but not limited to use of unauthorized parts or attachments), or adjustment or repair.
ASSEMBLY INSTRUCTIONS
7
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
9. Remove nylon washers (K), metal washers (J),
decorative cap (L) and final (M) from threaded pipe (I).
Pass nylon washers (K), metal washers (J), shade (E),
and decorative cap (L) over threaded pipe (I)
and secure with finial (M).
9
E
L
I
K
M
J
