PotteryBarn CLASSIC WALL STORAGE User manual

CLASSIC WALL STORAGE
Assembly Instructions
NOTE: PROFESSIONAL INSTALLATION REQUIRED
Important Safety Instructions:
Please read all instructions carefully before assembling.
For your safety, assembly by two people is recommended.
Parts Included:
Hardware:
(2) Shelf (A)
(8+2) Shelf peg (b)
(4) Mounting Screw (not included)
Pre-Assembly:
1. Remove all parts from the box and lay out on a clear carpeted or scratch-free work
surface. (The shipping box provides an ideal work surface) This will avoid damaging
any parts during assembly. Do not dispose of any contents until assembly is
completed to avoid accidentally discarding small parts.
2. Use the parts lists above to identify and separate each of the pieces included.
3. The illustrations provided allow for easier assembly when used in conjunction with
the assembly instructions.
4. Contact your local hardware store to determine the mounting hardware needed.
Assembly Instructions:
1. Determine the desired level for the shelf. Fit the shelf pegs (b) into the pre-
drilled holes.
2. Carefully insert the shelves (A) into the cabinet and gently rest the shelf onto the
helf pegs.
Figure 1 Figure 2
Professional Mounting
Instructions:
1. After measuring the recessed portion of cabinet, make a cut out in the wall
measuring 502 mm W x 96 mm D x 806 mm H (approximately 19 3/4” W x 3 3/4” D x 31
3/4” H).
2. Place the cabinet into the wall. With a pencil, mark the location of the 4 screw
holes. Use a carpenter’s level to ensure that the cabinet will be level.
3. Mount the cabinet to the wall with the proper hardware for your wall type.
Care Instructions:
wall
b
A
c

Dust with a clean, soft cloth
Avoid the use of chemicals and harsh cleaning agents
Thank you for your purchase
stores | catalog | www.potterybarn.com