PotteryBarn Classic Marble Top Floor Storage User manual

7629124
Classic Marble Top Floor Storage
Important Safety Instructions:
• Please read all instructions before beginning assembly.
• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
• Keep all parts and plastic bags out of the reach of children.
• For your safety and ease, assembly by two people is recommended.
Parts Included: Hardware Included: Tools Required:
 (2) Towel Bar (1)  (4) Philips Head Bolt (2)
 (4) Spring Washer (3)
 (4) Flat Washer (4)
 Phillips Head Screwdriver
Assembly Instructions:
1. Pull the drawer out half way. Press down on the white nylon drawer stopper, which is underneath the drawer. Pull
drawer completely out of the frame. See illustration.
2. Align (1) towel bar (#1) to the pre-drilled holes on the side of the frame. Insert the Philips Head bolt (#2) through a
spring washer (#3) and flat washer (#4). Fasten towel bar to frame by inserting hardware into towel bar through the
underside of the frame. Repeat steps for other towel bar. See illustration.
3. Slide the drawer back into the frame.

7629124
Levelers:
The levelers are pre-installed onto the legs. Adjust as needed to make sure the cabinet is level. Turn counter-clockwise to
increase height, clockwise to decrease height. See illustration.
Care Instructions:
 Wipe cabinet with a soft, dry cloth.
 To protect the finish, avoid the use of all chemical and household cleaners and abrasives as they may damage finish.
Thank you for your purchase
stores | catalog | www.potterybarn.com