Power Max MFT-410 User manual

MFT-410
4 IN 1 MULTIFUNCTION TREADMILL
OWNER’S MANUAL
Read all instructions carefully before using this product. Retain this owner's manual
for the future's reference. Product may be slightly different with photos, it is subject
to actual product.

www.powermaxfitness.net
2
TABLE OF CONTENTS
WARRANTY 2
IMPORTANT SAFETY NOTICE 3
PARTS LIST 5
ASSEMBLY INSTRUCTION 6
STORAGE AND MAINTENANCE 12
1 YEAR LIMITED WARRANTY
PowerMax Fitness warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it has
been installed and operated in accordance with PowerMax Fitness's Owner's Manual. PowerMax
Fitness's obligation under this warranty is limited to replacing or repairing, free of charge, any
parts which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application. From the date of
purchase, the frame is warranted to be free from defects for 1(one) year*.
Customer Care
Phone: [phone]
Email: [e-mail]
Support / Complaint Generation: support.powermaxfitness.net
This warranty is extended only to the original owner and is not transferable.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
* Terms and Conditions Apply. For T&C visit www.powermaxfitness.net

www.powermaxfitness.net
3
IMPORTANT SAFETY NOTICE
ATTENTION: Although the treadmill is considered as much as possible the safety during the design
and manufacture, but still need obey some safety precautions during use, please read this manual
carefully before assemble and use this treadmill, especially the below safety precautions:
1. Keep the children and pets away from the product at all times, DO NOT leave unattended
children in the same room with the machine.
2. Only allow one person use the machine one time.
3. If the user experiences dizziness, nausea, chest pain or any other abnormal symptoms,
STOP the workout at once! CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the treadmill on a clear, level surface, DO NOT use near water or outdoors,
5. Hands not close to any transmission parts during use.
6. Always wear appropriate workout clothing when exercising. Running or aerobic exercising
shoes are also required.
7. DO NOT place any sharp objects around the treadmill.
8. Handicapped or disabled person should not use the treadmill without presence of a
qualified health professional or physician.
9. Before use make sure that all the parts or units are securely tightened. If you find any
defective parts, keep the treadmill out of use until well repaired.
10. Before exercising, always do stretching exercise first.
11. NEVER operate the treadmill if it is not functioning properly.
12. Keep the training record well for your reference.
13. The max user weight for the product is 120kg. It is not designed for therapeutic use!
14. If necessary, you can ask someone help to assemble the treadmill.
WARNNING: Please consult the doctor before use this treadmill. It is important for the persons
whose age is more than 35 or have any illness. Read all the using and operating instruction
carefully before do any exercise. Our company will not take any responsibility for any damage
which caused by himself.

www.powermaxfitness.net
4
EXPLOSIVE VIEW

www.powermaxfitness.net
5
PARTS LIST
Part No. Part name/specification QTY. Part No. Part name/specification QTY.
1 Monitor 1 22L/R L/R pedal tube 2
2 Front Handle bar 1 23L/R L/R pedal 2
3 Hexagon head bolt
M10*40*25 1 24 Hexagon head bolt M10*15 2
4 Flat washer (1)20* (1)10.5*2.0 5 25 Hexagon head boltM10*55*30 2
5 Hexagon socket head bolt
M8*80*30 2 26 Carriage bolt M8*45*20 6
6 Arc washer (1)20*(1)8.5*2.0 4 27L/R L/R upright 2
7 Cross head screw M5*10 2 28 Base frame 1
8 Flat washer 012*05.5*1.0 2 29 Pulling pin 1
9 Central upright 1 30 Hexagon socket head bolt
M8*50*25
10 Nylon nut M8 18 31 Body twister set 1
11 Hexagon socket head bolt
M8*35*20 2 32 Adjustment tube 1
12 U shape bracket 1 33 Flywheel cover 1
13 Grip pulse wire 1 2 34 Cross head screw M5*12 2
14 Grip pulse wire 2 2 35 Main frame 1
15 Grip pulse post 2 36 Sensor wire lower 1
16 Sensor wire upper 1 37 Sensor wire middle 1
17 Hexagon socket head bolt
M8*20 4 38 Push-up bar 2
18 Flat washer c1)20*c1)8.5*2.0 26 39 Hexagon socket head bolt
M8*45*40 4
19 Oil cylinder 2 40 Hexagon head bolt M6*40*20 4
20 Pulley set 1 41 Cross wrench 1
21 Hexagon socket head bolt
M8*40*20 3 42 Allen wrench 1

www.powermaxfitness.net
6
ASSEMBLY INSTRUCTION
Step 1.
Fix L/R upright (27L/R) and Central upright (9) to Base frame (28) with Carriage bolts (26), Flat
washers (18), Nylon nuts (10). Don't tighten the bolts, nuts and screws securely one time, also
including the following assembly step.

www.powermaxfitness.net
7
Step 2.
1. Using Hexagon head bolts (25) and flat washers (4), install frame (35) to L/R upright (27L/R).
2. Fix the Adjustment tube (32) to the Main frame (35) and Base frame (28) with Hexagon
socket head bolt (30) and (21), Flat washers (18), Nylon nuts (10).
3. Fix the Flywheel cover (33) to the Main frame (35) with 2pcs Cross screws (34). 4.Connect
the Sensor wire lower (36) with Sensor wire middle (37).

www.powermaxfitness.net
8
Step 3.
1. Assemble the U shape bracket (12) onto the Central upright (9) with 1pcs Hexagon head
bolt (3), flat washer (4).
2. Connect the Sensor wire middle (37) with Sensor wire upper (16).
3. Connect the Grip pulse wire1(13) with Grip pulse wire2 (14). Push the Grip pulse post (15)
into the U shape bracket (12) with the connected wires hiding the inside of posts. Align the
holes of the three parts (27R,12,15) and screw the Hexagon socket head bolt (11) in. (Don't
trap the sensor wires. If they block the holes, please use the Allen wrench (42) to push them
aside.)
4. Repeat the above for the assembly of Part 27L,12,15

www.powermaxfitness.net
9
Step 4.
1. Install L/R pedal tube(22L/R) to the Central upright (9) with 2 sets Hexagon socket head
bolts (17) and Flat washers (18).
1. Fix the two Oil cylinders (19) to the L/R pedal tube with 2 sets Hexagon socket head bolt
(21), Flat washers (18), Nylon nuts (10).
2. Fix the Oil cylinders (19) to the Central upright (9) and tighten them with 2 sets Hexagon
socket head bolts (17) and Flat washers (18).
3. Insert the hook of Pulley set (20) into the hole of the Central upright (9) first. Then screw
the steel cable of the Pulley set (20) to the L/R pedal tube(22L/R) with 2 sets Hexagon head
bolts (24) and Flat washers (4).
4. Fix the L/R pedal (23L/R) onto the L/R pedal tube(22L/R) with 4pcs Hexagon socket bolts
(40). For easy assembly, while do this you can fold the Pedal tube(22L/R) upward.

www.powermaxfitness.net
10
Step 5.
1. Expand the Front handlebar (2) slightly then slide it onto the Central upright (9). Align their
holes and tighten them with 2 sets Hexagon socket head bolts (5), Arc washers (6) and
Nylon nuts (10)
2. Connect the sensor wires upper (16) and Grip pulse wire1(13) with the wires from the
Monitor (1) respectively.
3. Unscrew the two Cross head screws (7) and Flat washers (8) from the Monitor (1) and then
slide it onto the plate of the Central upright (9). Align their holes and screw them together.