Power Max TDM-100S User manual

TDM-100S
Treadmill User Manual
OWNER’S MANUAL
Read all instructions carefully before using this product. Retain this owner's manual
for the future's reference. Product may be slightly different with photos, it is subject
to actual product. Thank you for purchasing the product.

www.powermaxfitness.net
2
TABLE OF CONTENTS
WARRANTY
2
PRODUCT BRIEF
3
SECURITY PRECAUTIONS AND WARNINGS
4
INSTALLATION INSTRUCTIONS
7
USING INSTRUCTIONS
9
ROUTINE MAINTENANCE AND INSTRUCTIONS
15
1 YEAR LIMITED WARRANTY
PowerMax Fitness warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it has
been installed and operated in accordance with PowerMax Fitness's Owner's Manual. PowerMax
Fitness's obligation under this warranty is limited to replacing or repairing, free of charge, any
parts which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application. From the date of
purchase, the frame is warranted to be free from defects for 1(one) year*.
Customer Care
Phone: [phone]
Email: [e-mail]
Support / Complaint Generation: support.powermaxfitness.net
This warranty is extended only to the original owner and is not transferable.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
* Terms and Conditions Apply. For T&C visit www.powermaxfitness.net

www.powermaxfitness.net
3
1. PRODUCT BRIEF
A. Single Function Home Use Treadmill：
Main Parameters and Parts List
Main Technical Parameters
No.
Parameters Names
Description
1
Input power voltage
AC220-240V(50-60Hz)
2
Speed
0.8-14.8km/h
3
Running surface
1150*420 mm
4
Max user weight
110kg
5
Functions (Option)
Running (disc plate, sit up, dumbbell and massage)
CONSOLE
UPRIGHT
CLUMN
RUNNING
BELT
SIDE
RAIL
ENDCAPS

www.powermaxfitness.net
4
Packing list
No.
Name
Units
Qty
1
Complete machine
SET
1
2
Sit up/dumbbells/massager
SET
1
3
Accessory Bag
PC
1
4
Massager support tube
PC
1
5
Massager U tube
SET
2
Screws bag list
NO.
Name
QTY
NO.
Name
QTY
1
Inner Hexagon spanner 6mm
1
8
Audio cable
1
2
Inner Hexagon spanner 5mm
1
9
Safety key
1
3
Open spanner 13-15
1
10
ScrewM8*45
2
4
screwdriver
1
11
Screw M8*22
4
5
Silicone oil
1
12
Screw M8
2
6
manual
1
13
Flat washerφ8
2
7
Arc gasketφ8
6
14
Screw M8*25
2
2. SECURITY PRECAUTIONS AND WARNING
Tips: Before folding the treadmill, make sure that the gradient is "zero".
Notice: Please read the instructions carefully before use
◆Indoor using and storing the treadmill, avoid dampness, and cannot be spilled by water.
◆Please wear suitable clothes and sneakers before exercise. Prohibited to exercise on the
treadmill barefoot.
◆High power plug must be grounded, electric outlet should have a dedicated circuit, do not
share with other electrical equipment.
◆Keep children away from the machine to avoid accidents.
◆Avoid too long time and overload operation, otherwise will cause motor and controller
damaged, and will accelerate the deterioration of bearing, running belt and running board.
Should maintain machine on a regular basis.

www.powermaxfitness.net
5
◆Keep machine away from dust to avoid strong static.
◆Please cut the electric power off after using.
◆Please maintain good ventilation when running.
◆Please clamp security lock cable on your clothing to make sure the machine stops at
emergency condition.
◆If you feel not very well when using this machine, please stop and consult a doctor.
◆Silicone oil must be kept away from children after use.
◆If power cord is damaged, please contact our qualified maintenance personnel for service
rather than disassemble it at your own discretion.
Forbidden
◆Don't use the machine in the status of the shell break in or break off（the internal structure
exposed) or under the condition of welding-parts may fall off.
---- Otherwise an accident or injury may happen.
◆Don't jump up and down in the process of movement.
---- May be injuries caused by the fall.
◆Don't keep machine in or near moist space such as the bathroom.
◆Don't place machine in direct sunlight, or high temperature places such as near a stove or
a heating appliance.
----Otherwise may cause the leakage and burst into flames.
◆Don't use when the power cord is damaged or power plug pin is loose.
----Otherwise will lead to an electric shock, short circuit or fire.
◆Don't damage or bent by force or reverse the power cord. Don’t place heavy objects on
machine, don't clamp the power line.
----Otherwise will cause fire or get an electric shock.
◆Don't use machine for more than 2 people at the same time, and don't get close to the
machine when it is in use.
---- Or it may be an accident or injury due to falls.
◆People who can’t express their consciousness or can’t operate the machine by
themselves cannot use the treadmill.
----May occur accident or injury.
◆Avoid drinking water or pouring water when operation.
---- May cause electric shock and fire. Forbidden!
◆People who seldom do exercise shouldn't suddenly do intense exercise.
◆After eating or when feel tired, do not use machine.
---- May lead damage to your health.
◆This product is suitable for family use, does not apply to schools, gymnasium and so on. -
--There is the danger of injury.
◆Don’t use when hard objects are in pants pockets.
!

www.powermaxfitness.net
6
----May cause accident or injury.
◆Don’t use when the power plug is on the needle, garbage, or water.
----May cause electric shock, short circuit, or fire. Do not use with wet hands! when not in
use, pull out the power plug from the socket.
----The dust and moisture can age the insulation, and result in leakage fire.
◆This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
◆Children should be supervised to ensure that they do not play with the appliance.
Ground Protection System!
➢This product must be grounded. If the machine is dysfunctional, grounding will provide a
good channel for electric current, in order to reduce the electric shock risk.
➢This product is equipped with power plug with grounding conductor and plug. Completely
insert the plug to standard socket.
➢If the equipment grounding conductor’s connection is improper, it will cause electric
shock. If you have doubts about whether your product is grounded correct or not, please
entrust professional to check.
➢Please use the socket which has the same shape with the grounding plug. Don’t use plug
adapter.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved, children shall not play with the appliance, cleaning and user
maintenance shall not be made by children without supervision.
Scale figure: When installing, you can use the scale bellow to measure the length of screws
to ensure convenient installation.
!

www.powermaxfitness.net
7
3. INSTALLATION INSTRUCTIONS
When installing, simple fix all screws first, then tighten screws when the installation of frame is
done.
1. Put the machine flat on the ground. And lift the upright columns and console as bellow:
2. Use 5# hexagon wrench to fix the upright column on base frame with screw M8*45(A),
washer and nut, meantime fix screw M8*22(B) on base frame.
3. Hold left& right columns, use 6# hexagon wrench to lock the Console frame on the columns
with screw M8*25 and washers.
4. Use a multi-purpose wrench to loosen the two screws M5*14 hanging on the base, and
then lock them through the left and right covers respectively on the chassis.
M8*22
M8*45
M8*25

www.powermaxfitness.net
8
5. Keep the safety key on the position as follow:
NOTE: please confirm that all screws are locked uniformly according to the requirements after
installation, and check no part is left out before plugging electricity.
*According to the physical, three levels for choose as below:
picture：1 picture：2 picture：3
Instructions of changing manual incline into moving wheel module
1. Fold the running deck.
M5*14

www.powermaxfitness.net
9
2. Use combination wrench and 5# inner hexagon spanner to untighten the screws and remove
the manual incline module. Keep the manual incline modules in places where children cannot
reach
.
3. Take out the moving wheel modules from the accessory bag, cut the ties and assemble it as
shown in picture 1, and then tighten it with screws. Picture 2 is the well locked condition.
After assembling, unfold the running deck and make the wheels flat on the ground (as shown in
Picture
USING INSTRUCTIONS
Using treadmill
1) Insert the power plug properly and turn on the switch (in red colour)
When the light is on, there will be a sound of “Di”, and then the screen will be light up.
1

www.powermaxfitness.net
10
2) Please keep the safety key away from children when the treadmill is not in use. Please put the
silicon oil in places where children cannot reach. If it is eaten or split into eyes by mistake,
please use water to wash and consult doctor immediately.
3) Safety key Introduction
The treadmill can only start when the safety key is put on the yellow area of the console. Clip
the safety key on clothes when using the treadmill to prevent accidents. Pull the safety key
out from treadmill will stop the treadmill immediately, and please put the safety key back
when continue using the treadmill.
4) Folding Instructions
Fold the Treadmill:
It will save space when the treadmill is folded. Please turn off the switch and pull out the
power plug before folding. Lift the running deck until it is held.
5) Unfold the Treadmill:
Kick the pressure rod, hold the running deck and then let the running deck to fall gradually.
⚫STICKER
Kick
here

www.powermaxfitness.net
11
⚫Start-up
Normally start after 5 seconds of the countdown.
⚫Programming number
3 modes, 12 automatic programs, 1 FAT program.
⚫Safety lock function
Disconnect the security lock. "E7" shows on the screen, treadmill stops immediately, and a Di
alarm sound is let out. Put safety key back, all the data will be cleared in 2 seconds.
⚫Button function
❖Start button, Stop button
When the power is on, press the start button to start the treadmill. Stop key: when the
treadmill is in running state, press the stop button, all data will be cleared, and the treadmill
comes into a complete stop and returns to the manual mode.
❖Program key
Press this button to cycle from manual mode to automatic program (P1 - P12) in the
standby mode. Manual mode is system default running mode.
❖Mode key
Press this button to cycle modes between H1, H2 and H3.
❖Speed + - button
Use these keys to adjust the speed of the treadmill by 0.1Km/press, and if keep pressing
for more than 2 seconds, the number will increase or decrease steadily. It can be used to
adjust the
❖Speed shortcut button
Speed shortcut buttons can directly adjust the speed in running state.
❖Multimedia button
Play, pause, the former, the latter, volume up/down buttons. Play music when insert USB
or SD card.
❖Mute function
When press this key, the treadmill will be muted and press it again can restore the volume.
❖Incline keys:(Only included in models with incline)
Can be used to adjust the values when setting values and adjust the incline when the
treadmill is working. Keep pressing the key for more than 2 seconds, the incline will
increase or decrease steadily. These two keys are in hand grip.

www.powermaxfitness.net
12
LCD function:
•Speed display.
Display the current running speed value.
•Time display
Display the time of manual mode and the countdown time under automatic modes and
programs.
•Distance display
Display cumulative distance under manual mode and programs. Display the distance
countdown in automatic mode.
•Calorie display
Display cumulative calorie under manual mode and programs. Display the calorie countdown
in automatic mode.
•Heart rate display
Heart rate signal is detected, the heart-shaped mark flashes while testing.
The range of the data that each window displays:
TIME：5:00 –99.59(MIN)
DISTANCE: 1.0 –99.9(KM)
CALORIES: 20.0 –999 (C)
PULSE: 50 –200 (BPM)
⚫Heart rate measure function
In the case that the treadmill is energized, hold the heartbeat sensor for 5 seconds, the heart
rate will be shown on the screen, the display range is 50-200 times/min. The heart-shaped
mark flashes while testing. This data is for reference only, it cannot be considered as medical
data.
Automatic program
Each program is divided into 10 segments, and the running time of each segment of the program
is evenly distributed. Following is a form of time distribution of 12 programs.
Program
Set time / 10 = Running time of each
period
1
2
3
4
5
6
7
8
9
10
P1
SPEED
3
3
6
5
5
4
4
4
4
3
P2
SPEED
3
3
4
4
5
5
5
6
6
4
Time

www.powermaxfitness.net
13
P3
SPEED
2
4
6
8
7
8
6
2
3
2
P4
SPEED
3
3
5
6
7
6
5
4
3
3
P5
SPEED
3
6
6
6
8
7
7
5
5
4
P6
SPEED
2
6
5
4
8
7
5
3
3
2
P7
SPEED
2
9
9
7
7
6
5
3
2
2
P8
SPEED
2
4
4
4
5
6
8
8
6
2
P9
SPEED
2
4
5
5
6
5
6
3
3
2
P10
SPEED
2
5
7
5
8
6
5
2
4
3
P11
SPEED
2
5
6
7
8
9
10
5
3
2
P12
SPEED
2
3
5
6
8
6
9
6
5
3
⚫Modes’ Parameter Setting
Set the initial time countdown to 30:00 minutes, the setting range is 5:00-----99:00 minutes,
step by 1:00. The initial setting of calorie countdown is 50 kcal, the setting range is 20 --- 990
kcal, step by 10. The initial setting of distance countdown is 1.0 kilometres, the setting range
is 1.0 --- 99.0 km step by 1.0. Cycle to switch the order of manual, time, distance and calories.
⚫Physical Fitness Test (FAT)
In standby mode, press the "Program" key to enter the human body mass index (FAT)
detection window that displays "FAT". Press the "Settings" button to select the parameters to
be set (F1 - gender, F2-age the F3-height, F4-body weight), use “speed+” and “speed -”
to set gender and press mode button to set following parameters. When settings are done,
hold the hand pulse to enter the physical detection. The body mass index (FAT) is a
measurement of the relation between a person's height and weight, but not refer to the
proportion of the body. FAT is suitable for men and women, along with other health indicators,
it serves as basis for people to adjust weight. Ideal FAT should be between 20-25, less than 19
means skinny, the range between 25 and 29 is overweight, and if you exceed 30, it is
considered to be obesity. The range of parameters is as follow. (This data is for reference only
and cannot be considered as medical data.)
1. Sex 01male 02 female
2. Age10------99
3. Height100----200
4. Weight 20-----150

www.powermaxfitness.net
14
5. FAT ≤19 Under weight
FAT = (20---25) Normal weight
FAT = (25---29) Over weight
FAT ≥30 Obesity
Error Code Meaning
Fault code
Failure Description
fault handling
E1
Communication
Abnormal: when the
power on, the connection
between lower controller
and the console is
abnormal.
Possible Cause:
the communication between the lower controller and
console is blocked, check each joint between the
controller and console, ensure that each terminal is
fully matched well. Check the connection line, replace
it if it’s damaged.
E2
No signal from motor.
Possible Cause:
Check the cable between the motor and drive board to
see whether it is connected well or not, if not, connect
it well.
Check the motor cable to see whether it is damaged or
has a burnt smell, if yes, replace the motor.
E5
Over current protection:
In working, the lower
controller detects the
current to be over 6A for
more than 3 seconds.
Possible Cause:
Overloading leads to excessive current, and the system
stop for self-protection, or some part of treadmill is
stuck, causing the motor to stop. Adjust the treadmill
and restart it. Check if there is over current sound or
burnt smell while the motor is running, if yes, replace
the motor; check if the controller has a burned smell, if
yes, replace the controller; check the power supply
voltage, if it does not match or under the
specifications, use correct voltage to test the machine
again.
E6
Explosion-proof impact
protection: the power
supply voltage abnormal
or motor abnormal cause
the faulty of circuit while
drive the motor.
Possible Cause:
Check if the power supply voltage is 50% lower than
normal voltage, use the correct voltage and test the
machine again；
check if the lower controller has a burnt smell, if yes,
replace the controller;

www.powermaxfitness.net
15
Check if the motor cable between the motor and lower
controller is connected well, to make sure these
connect well.
E7
No safety key
Put the safety key on the right place.
ROUTINE MAINTENANCE AND INSTRUCTIONS
Warning: Before cleaning or maintaining products, please be sure the power plug of the treadmill
is pulled out.
Cleaning: Comprehensive cleaning will extend the using life of the electric treadmill.
Remove dust periodically in order to keep the parts clean. Be sure to clean running belt with both
sides of the exposed portion, which will reduce the accumulation of impurities. Make sure to wear
clean athletic shoes to avoid carrying the dirty matters into running board and belt. Treadmill
belts shall be cleaned by a damp cloth with soap. And please pay attention to avoid to wet the
electrical components and running belt.
Warning: Make sure power plug disconnect before moving motor cover away, clean the motor
at least once a year.
Running Belt Specialized Lubricant
This electric treadmill’s running board and running belt has been lubricated in factory. Friction
between the running belt and running board has a great influence to the using life and the
performance of the electric treadmill, therefore regular applying of lubricant is needed. We advise
you to check the board regularly. If the board’s surface is damaged, please contact our customer
service centre.
We advise using lubricant between running belt and running board with following schedule:
Lightweight user (use less than 3 hours a week) once per month;
Heavyweight use (use more than 7 hours a week) once every half month.
➢In order to better safeguard your electric treadmill and extend the life of the machine, it is
recommended that after your continued use of two hours, turn off the machine and let it rest
for 10 minutes before using again.
➢If the treadmill belt is too loose, there will be skid phenomenon’s while running; if it’s too
tight, it may reduce motor performance and harden the abrasion of roller and the running
belt. You can lift two sides of the running belt for 50-75mm when the tightness is appropriate.

www.powermaxfitness.net
16
Running with Adjusted Alignment and Tightness
In order to better use the treadmill and make the treadmill functions work better, it is necessary
for you to adjust the running belt into the best condition.
Running Belt alignment
⚫Put electric treadmill flat on the ground.
⚫Make the electric treadmill run at a speed of about 6-8km/hour.
⚫If the running belt is closer to the left, rotate the left adjusting bolt with 1/2 turn clockwise,
then rotate the right adjusting bolt with 1/2 turn counter-clockwise. (Figure A)
⚫If the running belt is closer to the right, rotate the right adjusting bolt with 1/2 turn clockwise,
then rotate the left adjusting bolt with 1/2 turn counter-clockwise. (Figure B)
Figure A Figure B
Multi-wedge Belt Tension Adjusting
When you use the treadmill for a long time, the multi-wedge belt becomes loose because of the
abrasion, then you have to do some appropriate adjustment to facilitate the safe use.
Judgment: the feeling of running with the occasional pause phenomenon, which indicating that
the treadmill belt or multi-wedge belt are a little loose and further affirmation need to be made.
A. Method of judging which part is loose: Remove the four screws on protective cover, make
the treadmill run at a speed of 1 km/h, and then stand on the running belt, grip the
armrests, and tread the treadmill belt slightly. (we advise treading the treadmill belts with
the user's own weight) The instantaneous step cannot stop the belt; the tightness is
appropriate.
B. If your instantaneous step stops the running belt, but the multi-wedge belt and former
roller is still running, it indicates that the running belt is loose and appropriate adjustments
must be made to facilitate the safe use

www.powermaxfitness.net
17
C. If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt
stop, but the motor is still running, it indicates that the multi-wedge belt is loose and
appropriate adjustments must be made to facilitate the safe use
Step 2: Use a wrench to adjust the screws on the motor base according the condition. Meanwhile,
gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too loose,
you can flip the multi-wedge belt by 100%; if it is too tight, the degree for you to flip the belt is
very limited. It is appropriate to flip the multi-wedge belt by 80% after adjustment. Please adjust
the tightness of the multi-wedge belt into the state that it could be flipped by 80%.
Step 3: Finally lock the motor base, and install the front cover.
Applying Silicone Oil
Step 1: Open up the treadmill belt
Step 2: Open the silicone oil bottle, squeeze the silicone oil the to running board side, as shown
in the following Figure: