Power Max TDA-255 User manual

TDA-255
Multi-Function Treadmill User Manual
OWNER’S MANUAL
Read all instructions carefully before using this product. Retain this owner's manual
for the future's reference. Product may be slightly different with photos, it is subject
to actual product. Thank you for purchasing the product.

www.powermaxfitness.net
2
TABLE OF CONTENTS
WARRANTY
3
QUALITY ASSURANCE COMMITMENT
4
CAUTION
4
SPECIAL ATTENTION
5
GROUND PROTECTION SYSTEM
6
ASSEMBLY INSTRUCTION
7
PACKING LIST
7
EXPLODED VIEW
9
PART LIST
10
INSTALLATION STEPS
11
PRODUCT DRAWING
13
INSTRUCTIONS
14
LCD TREADMILL
17
TROUBLESHOOTING OF CIRCUIT FAULT
21

www.powermaxfitness.net
3
1 YEAR LIMITED WARRANTY
PowerMax Fitness warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it has
been installed and operated in accordance with PowerMax Fitness's Owner's Manual. PowerMax
Fitness's obligation under this warranty is limited to replacing or repairing, free of charge, any
parts which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application. From the date of
purchase, the frame is warranted to be free from defects for 1(one) year*.
Customer Care
Phone: [phone]
Email: [e-mail]
Support / Complaint Generation: support.powermaxfitness.net
This warranty is extended only to the original owner and is not transferable.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
* Terms and Conditions Apply. For T&C visit www.powermaxfitness.net

www.powermaxfitness.net
4
Thank You for Purchasing the Product. You Will Be Healthier After Using.
QUALITY ASSURANCE COMMITMENT
We make sure that this product is made from high quality materials.
we will be responsible for maintenance if you use the product in right way
Warranty: one year (since the day you brought), please contact after—sale service, when you have
some problems with the treadmill. you cannot repair by yourself without our permission.
Accessories can be warranty are as follows: frame, lines, hook foam, motor, wheel. the following
can' t guarantee:
1. The damage of the external causes
2. Using the accessories of another factory
3. Not according to the manual operation
During normal using, you Cannot change or repair vulnerable parts, For example: belt.
This Quality assurance commitment is for Personal user not for the gym
If you want to buy the part to be outside the scope of the warranty, please contact customer
service, and provide those details:
1. Product manual
2. models
3. Parts number
4. 4. Purchase date
CAUTION
◆We considered a lot of security problems when we design the product, if you do not use the
machine in right way and get in trouble, we will not be responsible for it, so please use the
product correctly according to the directions.
◆In order to ensure your safety and avoid the accident, please read the instructions carefully.
◆Indoor using and storing the treadmill, avoid dampness, and cannot be spilled by water. Please
wear suitable clothes and sneakers before exercise. Prohibited to exercise on the treadmill
barefoot.
◆High power plug must be grounded, electric outlet should have a dedicated circuit, do not
share with other electrical equipment.
◆Avoid too long time and overloading operation, otherwise it will cause damage to motor and
controller, and will accelerate the deterioration of bearing, running belt and running board.
◆Should maintain machine on a regular basis.

www.powermaxfitness.net
5
SPECIAL ATTENTION
•Keep machine away from dust to avoid strong static. Please cut electric power off after using.
•Please maintain good ventilation when running.
•Please clamp security lock cable on your clothing to make sure the machine stops at
emergency
•condition.
•If you feel not very well when using this machine, please stop and consult a doctor.
•Silicone oil must be kept away from children after use.
•If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid a hazard.
----This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
•Children should be supervised to ensure that they do not play with the appliance. Don' t use
the machine in the status of the shell break in or break off (the internal structure exposed) or
under the condition of welding—parts may fall off.
•Otherwise, an accident or injury may happen. Don' t jump up and down in the process of
movement.
•may cause injury by the fall.
•Don' t keep machine in or near moisture space, such as the bathroom.
•Don' t place machine in places with direct sunlight, or high temperature, such as near a stove
or a heating appliance.
----Otherwise, may cause the leakage and burst into flames.
•Don' t use when the power cord is damaged or power plug pin is loose,
----otherwise, will lead to electric shock, short circuit or fire.
•Don' t damage or bent by force or reverse the power cord. Don' t place heavy objects on the
machine, don' t clamp the power line.
----otherwise, will cause fire or get an electric shock.
•Don' t use machine for more than 2 people at the same time, and don' t be close to the machine
when it is in use.
•or it may be an accident or injury due to falls.
•People who can' t express their consciousness or operate the machine by themselves cannot
•use the treadmill.

www.powermaxfitness.net
6
----accident or injury may occur.
•Avoid drinking water or pouring water when operating.
•may cause electric shock and fire. Forbidden!
•People who seldom do exercise shouldn’t' t suddenly do intense exercise.
•After eating or when feel tired, do not use the machine.
----may lead to damage to your health.
•This product is suitable for family use, does not apply to schools, gymnasium and so on.
----there are the dangers of injury.
•Don’t use when hard objects are in clothes’ pockets.
----may cause accident or injury.
•Don 't use when the power plug is on the needle, garbage, or water.
----may cause electric shock. Short circuit or fire. Do not use hands!
•When not in use, pull out the power plug from the socket.
----The dust and moisture can age the insulation which may lead to leakage and fire.
GROUND PROTECTION SYSTEM!
◆This product must be grounded. If the machine is dysfunctional, grounding will provide a good
channel for electric current in order to reduce the risk of electric shock
◆This product is equipped with power plug with grounding conductor and plug. Complete insert
the plug to standard socket.
◆If the equipment' s grounding conductor connection is improper, it will cause electric shock.
◆If you have doubts about whether your product is grounded correct or not, please entrust
professional to check.
◆Please use the socket with the same shape with the grounding plug. Don' t use plug adapter.
If power cord is damaged, please contact our qualified maintenance personnel for service
rather than disassemble it at your own discretion.
◆If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
◆This appliance is not intended for use by persons (including children) with reduced physical,
sensor your mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.

www.powermaxfitness.net
7
ASSEMBLY INSTRUCTION
Please read the installation carefully before installing
Remove all the items and put them on the ground
Check the accessories according to the packing list
When you are carrying something, please pay attention to the whole
Install the product according to the instructions
The product must be approved by the installation, if necessary, please professional to install
Do not damage the product
PACKING LIST
Packing List
Multi-
Function
Simple
Function
Machine+Operation Panel
Tool Bag
21. Safety Sky
25. Line for Mp3
84. Oil
85. Manual
25
21
Multifunction
Parts
8.Massager Stand
9. Sit-Up Support
18. Massager
53. Sponge Sheath
40-41
Left-Right Cover

www.powermaxfitness.net
8

www.powermaxfitness.net
9
EXPLODED VIEW
All the parts are showed in the following picture
l

www.powermaxfitness.net
10
PART LIST
No.
Items
No.
Items
1
pedestal
44
sidebar
2
upright post
45
floor mat
3
control holder
46
wheel
4
incline holder
47
Rubber sleeve
5
motor holder
48
but ton
6
main frame
49
Round cushion
7
stator
50
Round cushion
8
massager holder
51
pipe stopper
9
sit-up holder
52
pipe stopper
10
Running board
53
Sponge sheath
11
running belt
54
Button of the power cord
12
The front roller
55
pipe stopper of wheel
13
The rear roller
56
Allen wrench 5mm L
14
belt
57
Allen wrench 6mm L
15
Gas spring
58
wrench
16
DC motor
59
inner hexagon screw MIO*11O
17
incline motor
60
inner hexagon screw M10*40
18
mass ager
61
inner hexagon screw M10*60
19
up control
62
inner hexagon screw M8*20
20
down—control
63
inner hexagon screw M8*25
21
safety key
64
inner hexagon screw M8*35
22
top—line
65
inner hexagon screw M8*40
23
Mid—line
66
inner hexagon screw M8*45
24
end—line
67
inner hexagon screw M8*50
25
line for mp3
68
inner hexagon screw M8*55
26
Safety switch sensor
69
Hexagon socket head cap screws M8*80
27
''Put down ''but ton
70
Hexagon socket head cap screws M8*60
28
short line
71
Hexagon socket head cap screws M8*30
29
long line
72
Hexagon socket head cap screws M8*12
30
The power cord
73
inner hexagon screw M8*45
31
The power switch
74
self-tapping screw ST4.2*15
32
The fuse switch
75
Self-Drilling Screw ST4.2*15
33
over cover of control
76
Self-Drilling Screw ST4.2*25
34
back cover of control
77
self-tapping screw ST4.2*10
35
Electro broad
78
M8 gasket
36
rear cover
79
MIO gasket
37
armrest
80
M8 spring cushion
38
top motor cover
81
M8 Lock nut
39
end motor cover
82
MIO Lock nut
40
left cover
83
oil
41
right cover
84
Manual
42
left cover of foot
85
Wriggled plate
43
right cover of foot
86

www.powermaxfitness.net
11
INSTALLATION STEPS
Step 1: installation of electronic meter
1. Put the machine on the flat ground, set the column and console up in the direction shown as
bellow.
2. Hold left& right columns, use Allen wrench 63# to lock the console frame on the columns with
screw 78#.
1
Step 2: installation of upright post and left-right cover
1. Make the upright up with the screw68#, gasket81#, nut 81#„let it stand on the pedestal2. Use
screw79# to lock covers on the pedestal

www.powermaxfitness.net
12
Step 3: installation of massager holder
1. get out the holder from the packaging, use screw62# and gasket78# to make the massager
holder hold on the upright post.
2. AS show in the picture, use screw62#, gasket78#, nut81# to fix the sit-up holder stand on the
massager holder
3. Fixed massage machine with screws, gaskets and spring washers.
Step 4: installation of other parts
1. Put the dumbbell on the groove
2. Put the Wriggled plate on wherever you like
3. Put the safety on the yellow place
4. Check the machine and make sure all the screw is locked before using

www.powermaxfitness.net
13
PRODUCT DRAWING
Multi-Function Treadmill

www.powermaxfitness.net
14
INSTRUCTIONS
The instructions of treadmill:
For the consideration of your safety, a power socket with ground wire must be used when
the treadmill is working.
1. Insert the plug into the socket and turn on the power switch (the light turns into red).
Make sure a beep is heard and the window on the dashboard is showed.
2. Put the safety lock on the yellow spot of the dashboard. Make sure the safety lock is
clipped on your clothes in avoid of accident. The running machine will be stopped when
the safety lock is moved away. Put it back in situ to restart.

www.powermaxfitness.net
15
The instructions of massage machine:
For the consideration of your safety, a power socket with ground wire must be used when
the massage machine is working.
The main frame of the machine (A) must be unfolded to avoid falling forward during the
massage.
You can lie on the main frame of the machine (A) to do sit-ups according to individual
requirements.
The instructions of moving the treadmill:
Fold the treadmill. Keep your foot against the edge of pedestal and pull the armrest
backward to incline the whole machine.
Move the treadmill. Keep the machine out of the reach of children to prevent the accident.

www.powermaxfitness.net
16
The instructions of folding:
Fold the treadmill.
Fold the treadmill to save space.
Turn off the power switch and pull the plug before folding the machine.
Lift the treadmill till the gas spring tube gets stuck.
Lay down the treadmill.
Lightly step on the gas spring tube to lay down the treadmill slowly.
ATTENTION! Keep children away from the treadmill to prevent accident.

www.powermaxfitness.net
17
LCD TREADMILL
USER MANUAL
1. LCD DISPLAY WINDOW
•Speed Display Window
Speed window display present speed on treadmill running, the scope of speed display:
0.8-15.0KM/H.
Window displays time countdown of 3, 2, 1 after pressing start button.
Window displays after press program or setting key
•Time display window
Time window shows forward time from 0:00 —99; 59, running belt slows down till stop when
running time to 99: 59, time window show "End”, after deed stop, the treadmill enters
standby mode 5 minutes later. In contrast, time countdown displays from time set to 0:00,
running belt slows down till stop, as well, speed window di splays End" when time
countdown shows 0: 00, after deed stop, the machine enters standby mode.
•DIS display window
DIS window shows running distance, displays 0. 00—99. 90 forwardly, recount time from
zero when time pass; Distance countdown show the set to zero contrarily, the treadmill stops
when countdown to zero and DIS window shows End, then machine will enter readiness
modes in 5 minutes after dead stop.
•CAL display window
CAL window displays calories consumption. It displays forward calories of 0. 0—999. 0,
recount from zero once the calories are over. Calories window also has countdown function,
after complete stop, the device enters standby mode in 5 minutes.
•PULL/INCILINE display window
PUL display window shows heart rate, the sensors on the handrails monitors the runner' s
heart rate and displays from 50 to 200BPM on the window.
Inclines window displays incline percentage degree range from 0 to 15
2. PRESS BUTTON
•PROG key is program button, window displays POI—P02—•••—P12—FAT circularly for
runner selection once PROG button is pressed. POI—PI 2 is built—in program FAT is for
fat content measure.
•MODE key is for mode selection, window displays 4 models of 0:00, 15:00, l. 0, 50. 0
circularly for runner selection. 0:00 is manual mode, 15:00 is time countdown mode, 1. 0

www.powermaxfitness.net
18
is distance countdown mode, 50. 0 is calories countdown mode. Runner can adjust speed
and incline at mode selection, press START button to start treadmill after mode setting
finished.
•START key is to start running, user can start treadmill running by pressing the button
anytime in the condition of safe key pull on.
•STOP key is to stop running, treadmill stops running and enters reset when the STOP
button pressed.
•SPEED+, SPEED—keys are for speed plus or minus. User can adjust speed before or after
running start, the distance gap is 0. 11<111 each press, distance will increase or decrease
continuously if press the button more than 0. 5 second.
•INCLINE+, INCLINE—These 2 buttons are for incline plus or minus, User can adjust
incline before or after running start, the incline gap is 1% each press, incline will increase
or decrease continuously if press the button more than 0. 5 second.
•SPEED keys, there are 4 quick speed keys of 3, 6, 9, 12KMH on the console, user can set
or change speed quickly by pressing the button.
•INCLINE keys, there are 3 quick incline buttons of 3, 6, 9, press the key, user can set and
change degree percentage of incline.
•At standby status, press SPEED+ and SPEED—over 3 seconds, window will display
distance, then press STOP key more than 3 seconds total distance will reset.
3. QUICK CONTROL BUTTONS (MANUAL MODE)
Turn power switch, then pull magnetic safe key on the safe key one the safe key position of
white circle below console.
Press START key, system enters into countdown and windows displays 3 seconds countdown,
the buzzer makes a sound, 3 seconds later, treadmill begin to run at speed of IKM per hour.
User can adjust via pressing SPEED+, SPEED-, either adjust incline by pressing INCLINE+,
INCLINE- after treadmill start.
4. CONSOLE OPOERATION IN MOTION
•Press SPEED- button, treadmill will decrease speed
•Press SPEED- button, treadmill will improve speed
•Press INCLINE- button, treadmill incline will increase
•Press INCLINE+ button, treadmill incline will decrease
•Press STOP button, treadmill will slow down till stop

www.powermaxfitness.net
19
5. MOBILE MODE
A. Press START button at standby status, treadmill begin to run on 0 incline at 1.0KMH speed,
other windows begin to count forwardly, user can change incline and speed by pressing
INCLINE+, INCLINE- or SPEED+, SPEED-.
B. Press MODE button at standby status, the device enters countdown mode, TIME window
displays 15:00 and twinkles, then press INCLINE+, INCLINE-, or SPEED+, SPEED-, user can
set running time range from 5:00 to 99.9 minutes
C. Press MODE at time countdown status, enters distance countdown mode, DIS window
shows 1.00 and twinkles, user can set running distance of 0.50-99.9 KM via press any buttons
of INCLINE+, INCLINE-, SPEED+ or SPEED-.
D. Press MODE at distance countdown status, enters calories countdown mode, CAL
windows show 50.0 and twinkles, user can set calories consumption by press any button of
INCLINE+, INCLINE-, SPEED+, SPEED-, the setting scope of calories is 10.0-999.0.
E. After any countdown setting finished among 3 countdown modes in all, then press START
button, the running belt begin to move in 3 minutes, user can adjust incline and speed
separately by pressing INCLINE+, INCLINE or SPEED+, SPEED-, press STOP button and
running belt stop move.
6. BUILT-IN GROGRAM
There is 15 built-in program POI-PI 5 in the treadmill system. Press GROG button at standby
status, SPEED window shows PI -PI 5, TIME window twinkles after favourite program chosen
and displays 15:00 (minutes) of present time, then press any button of INCLINE+, INCLINE-,
SPEED+, SPEED and present running time, finally press START button the machine will start
built-in program. There are 20 phases in built-in program, running time of each program is
1/20 of setting time., user can change speed and incline will revise according to program
change. It sounds Bi-Bi-Bi to remind when the machine enters into next program
automatically, but the machine will restore speed and incline set when enter into next built-
in program. Treadmill will not slow down till complete stop until all program finish, then
enters into standby status in 5 seconds after dead stop.

www.powermaxfitness.net
20
7. PROGRAM INSTRUCTION
Each program is divided into 20 phases averagely according to time, each phase has its own
speed and incline