Precision SB52 User manual

MADE IN
USA
Retain for future reference TIP: Many of these hardware parts can be purchased at your local hardware store.
1
24
17 2
16
15
13
18
23 11
14
21
20
12 19 22
12
10
8
6
5
9
7
SB52 & SB52GY Broadcast Spreader
9/05
CUSTOMER SUPPORT
At Precision Products Inc. delivering quality, value and
outstanding service is our goal. However, sometimes
parts do become damaged or lost during transport from
our facilities to the store. If you have any problems,
please do not return this merchandise to the store.
Call us and we will take care of any problem you may
have with this unit. When ordering replacement parts,
please have the model number, part description, and part
number.
Customer Support: [phone] Ex. 204
General Office Number: [phone]
General Fax Number: [phone]
Mail: Precision Products Inc.
Parts Division
316 Limit Street
Lincoln, IL 62656
Visit us on the web at www.precisionprodinc.com
LIMITED WARRANTY
This unit is warranted against defects in materials and workmanship
to the original purchaser, under normal use and service, for a period of
ninety (90) days from date of sale. During the Warranty Period, we will
repair or replace at our option free of charge to the original purchaser,
any part of the Unit that our examination shows to be defective in
workmanship or materials. This Warranty Does Not apply to damage
caused by misuse, abuse, neglect, normal wear, or alterations by
unauthorized persons.
11
4
3
10
23
PARTS LIST
REF# PART DESCRIPTION PART # QTY.
01
02
03
04
05
06
07
08
09
10
11
12
13
~~
14
15
~~
16
~~
17
18
19
20
21
22
23
24
Hopper
Slide Plate
Spinner Disc
Spinner Shaft
Small Pinion Gear
Large Pinion Gear
Axle
Gear Case Cover(Front)
Gear Case Cover(Rear)
Gear Case Collar
3/8“ Retaining Ring
Agitator Clip
Hopper Support (Black)
Hopper Support (Gray)
1/4” x 1-1/2” Hex Head Bolt
Handle (Black)
Handle (Gray)
Leg Stand (Black)
Leg Stand (Gray)
Wheel
1/2“ Hubcap
1/4“ x 2-1/2” Round Head Bolt
1/4“ Wing Nut
1/4“ Spring Nut
1/4“ x 1-3/4” Carriage Bolt
Axle Bushing Nylon Split
Control Cable Assembly
2672
1307
2614
1004
2622
2621
2635
2615
2616
1077
1008
1042
1002B
1002GY
6129
1048B
1048GY
1032B
1032GY
1916DJ
1040
1049
2828
1051
1408
1842
2441
1
1
1
1
1
1
1
1
1
3
1
1
2
2
2
1
1
1
1
2
2
1
7
2
6
2
1
PARTS NOT TO SCALE
PARTS MAY VARY IN COLORS AND/OR SHAPE
See
Below
1016

SB52 & SB52GY Assembly Instructions
Attach Control Cable Assembly by passing a 2-1/2”
Round Head Bolt through Cable Assembly and Handle.
Secure with Wing Nut.
Attach the Leg Stand to the outside of Hopper
Supports using 1/4” x 1-3/4” Carriage Bolts and
Wing Nuts.
ASSEMBLY TIP: Loosely
tighten nuts and bolts at
first. Fully tighten when the
unit is completely
assembled. Carriage Bolt
(6 Required)
(7 Required)
Settings are made by pressing
down on the Calibration Indicator
button and setting to desired
number on the Control Cable
Assembly.
USING YOUR SPREADER
* TO OPEN - Push the Control Lever
forward until it stops against button.
* TO CLOSE - Pull the Control
Lever back toward Operator.
See Application chart for
setting information.
AFTER EACH USE: Wash unit thoroughly let dry. Lubricate
moving parts, including slide plate, axle and upright shaft.
MAINTENANCE INSTRUCTIONS
CAUTION:
CARE MUST BE TAKEN WITH ANY WEED
KILLER, PESTICIDE, OR COMBINATION
PRODUCT.
THEY CAN BE HARMFUL TO OTHER PLANT
LIFE IN THE YARD.
Attach Handle to Leg using 1/4” x 1-3/4”
Carriage Bolts and Wing Nuts.
ASSEMBLY HARDWARE REQUIRED
1/4“ Wing Nut
1/4” x 1-3/4”
Carriage
Bolts
Leg Stand
1/4” x 1-3/4”
Carriage Bolt
Wing Nut
Control Cable
Assembly
1/4” x 2-1/2”
Round Head
Bolt
Handle
Wing Nut
Top View
Lever Control
Calibration Indicator Button
Setting Numbers
2-1/4” Round Head Bolt
(1 Required)
STEP 1
Wing Nuts
T2SEP
STEP 3
Handle