Precor Experience Series 700 Line User manual

700/600 LINE TREADMILL
GETTING STARTED GUIDE
Welcome to a personalized fitness experience for your members
Get to know Precor equipment
For a treadmill that strikes the optimal balance between durability, reliability, and innovation, look no further.
These Precor treadmills deliver on these essentials with premium materials and features.
To make sure your equipment withstands the test of time and consistent usage, it’s important to know if it’s
working well. The Active Status Light (700 line only) is located at the front edge of the treadmill hood and
gives you this information at-a-glance.
During normal operation, the status light is a steady blue. It changes color and pattern if the treadmill detects
a mechanical or electrical problem.
Status Light Color Meaning Action Required
Steady (solid) blue Treadmill operating normally. None
Pulsing blue Treadmill belt needs replacement
(except for 230 V models).
Perform maintenance then, reset
status light.
Steady (solid) yellow Treadmill has detected and recovered
from an error. Safe to use, but some
functions may be unavailable.
Refer to console’s event log for more
information.
Get to know Precor cardio workouts
Our instructional videos empower exercisers, trainers, and operators with essential information for safe and effective treadmill use.
Once trainers understand the cardio workouts available on the treadmill, they can recommend either manual or preset workouts that match up with a member's training
program or tness goals, including Lose Weight, Be Fit, Get Toned, and Push Performance workouts.
IMPORTANT
The heart rate features are intended for reference only. They may not be accurate for every user or at every speed and are not intended for use as a medical device. Holding
the heart rate handle touch sensor while exercising at higher intensity may also decrease accuracy of the heart rate reading and is not recommended. Please also read your
product documentation and visit: www.precor.com/en-us/customer-service/faq.
For complete treadmill operating instructions and troubleshooting, visit us at www.precor.com.
Make sure your trainers regularly read our blog (select languages) at www.precor.com for more ideas about tness routines and advice from trusted
industry experts.

TRAINING AND EXERCISING
CAUTION
Before beginning any tness program, see your physician for a thorough physical exam. Seek advice from your physician to learn the target heart rate
appropriate for your tness level.
Read all safety and operating instructions included with your equipment. For more information, visit us at www.precor.com and look for your equipment model number.
Start a workout
Step 1: Make sure that the power to your fully assembled treadmill is ON. Step 2: Straddle the belt by placing your feet on either side of the belt. Attach the
safety clip securely to your clothing.
Step 3: Press QuickStart (on screen for touchscreen consoles), or choose a preset
workout, then press OK to begin.
Step 4: After the console has displayed its countdown and the belt has started
moving, step onto the belt.
Step 5: Use the motion controls to adjust the incline angle of the treadmill and the
speed of the belt.
Step 6: To end your workout early, press Pause on the console or press the Stop
switch.
Step 7: To dismount safely, place feet on the rails until the belt comes to a complete
stop and then step off the treadmill.
Check out the trend-based workouts and Precor product tutorials at
www.precor.com/education.
700/600 Line TRM Getting Started Guide | 305284-101 rev A, ENU
© 2018 Precor Incorporated | May 2018