Prepac DC-3345 User manual

5-Drawer Chest
Required Tools
Screwdrivers
Flat Head
Using a power screwdriver
will speed up assembly.
Caution
Do not over tighten any screw.
The last few turns of each screw
should be done very slowly or by hand.
Phillips Head
Optional Tools
DATE STAMP
Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4
LB-0594-R
2007-02-16
Online Option:
Fill out the Parts Order Form on our website.
Go to www.prepacmfg.com and choose
Parts Order from the Support menu
Depending on collection, the
style of your product may vary
from this picture.
Model # DC-3345
Assembly Instructions
For the following collections:
Sonoma, Monterey, Montego,
Broadway, Chelsea, Winslow
CALL US FIRST
1-877-PREPAC1
1-877-773-7221
Mon - Fri 7am - 4pm PST
10am - 7pm EST
•For help with assembly
•If you have received a damaged or defective part or
are missing hardware.
We will process replacement parts
UPS Ground or mail.
Before you call please:
2) Note the
3) Review the contents of your shipment to determine
what you are missing. This unit is shipped in 2
cartons. Make sure you have received both.
in 2 business days or
less. Parts are shipped via
1) Record the following information from the shipping
label on the outside of the box. You will need it for
warranty purposes:
•Ship To Name
•Sales Order Number
product model number.
Hammer
This product is shipped in
2 cartons
Make sure you have both cartons.
Sometimes cartons shipped on the
same day get separated and are
delivered on different days.
2 of 2
1 of 2 +

¾” Nail
(30)*
RM-0022
*More than required
15mm Zinc Cam
(4)
RM-0103
Levelling Feet
(4)
RM-0139
Plastic Dowels
(11)
RM-0072
Green Twister Dowel
(4)
RM-0501
3/4” screw (1)
RIGHT Cabinet Slide (5)
1 LEFT Drawer Slide per Drawer (Total = 5)
1 RIGHT Drawer Slide per Drawer (Total = 5)
2" Confirmat Screws
(12)
RM-0001
Cabinet Hardware
Screw Cover Caps
(12)
RM-0226 black
RM-0523 maple
RM-0008 white
RM-0620 cherry
Knob
(10)
RM-0464 maple / black
RM-0625 white / cherry
#8 7/8” Machine Screw
(10)
RM-0465
Hardware Identification
LEFT Cabinet Slide (5)
Drawer Hardware
Drawer Slide Screw
(20)
RM-0074
Green Twister Dowel
(20)
RM-0501
¾” Nail
(20)
RM-0022
12mm Zinc Cam
(20)
RM-0502
#8 - 1½” Hi Lo Screws
(20)
RM-0504
4 per drawer
Safety Strap Hardware Package
T Spacer
(20)
RM-0628
Drawer Slide Screw
(60)
RM-0074
Safety Strap (1)
Page 2 of 16

Cabinet Parts
1¾” Top Molding (1)
TR-4712 maple
TR-4112 black
TR-4012 white
TR-4912 cherry
Profiled Top (1)
TP-0472 maple
TP-0412 black
TP-0402 white
TP-0492 cherry
Right Side (1)
SR-0472 maple
SR-0412 black
SR-0402 white
SR-0492 cherry
Left Side (1)
SL-0472 maple
SL-0412 black
SL-0402 white
SL-0492 cherry
Decorative Stabilizer B (1)
maple
ST-4111 black
ST-4011 white
ST-4911 cherry
ST- 4711
Plain Stabilizer (1)
ST-4712 maple
ST-4112 black
ST-4012 white
ST-4912 cherry
1¾” Side Molding (2)
TR-0474 maple
TR-0414 black
TR-0404 white
TR-0494 cherry
C1
C8
C3
C6 C7
C2
C1
C8
C6
C7
C2
C5
C4
C8
C9
Foldable
Backer (1)
BB-0106
C9
C5
C4
Decorative Stabilizer A (1)
KR-0472 maple
KR-0412 black
KR-0402 white
KR-0492 cherry
C3
Page 3 of 16

STEP 1
Attach T-spacers to left and right cabinet sides using drawer slide screws
Estimated Time: 15 - 25 minutes
1a
1a
1b
1b
Then, attach metal cabinet slides to T-spacers using drawer slide screws
Left
Cabinet
Side
Right
Cabinet
Side
T-spacer & Slide Detail
Drawer Slide Screw
Drawer
Slide
Screw
Page 4 of 16
C2 C3
Top
Front

Green Twister Dowel
STEP 2
Insert cams into holes on the top of each side.
Estimated Time: 1 minute
STEP 3
Screw green twister dowels into the underside of the top
Estimated Time: 2 minutes
Make sure arrow
on cam faces top
C1 Top
Page 5 of 16
C2 C3

STEP 4
Attach all 3 stabilizers to left and right sides using Confirmat screws.
Insert screw cover caps to finish.
Decorative stabilizers C5 & C6 are interchangeable. Please choose the style that you
prefer and attach it to the front.
Estimated Time: 10 minutes
C6
C5
C4
FRONT
C3
C2
Left Side
Right Side
Page 6 of 16
Confirmat Screws &
Screw Cover Caps
C5
C6
or
or

STEP 6
Hammer plastic dowels halfway into side and top moldings
Estimated Time: 3 minutes
STEP 5
Attach top to sides and lock cams using
a flat head screwdriver
Estimated Time: 2 minutes
C8
C7
Page 7 of 16
C8
Locked
Turn 210°
Unlocked

STEP 7
Attach top & side moldings.
Using your hands, apply even pressure to moldings and press firmly
Estimated Time: 3 minutes
Page 8 of 16
Do not use a
hammer
It may damage
the molding

NOTE:
Do not stand
unit up without
the backer
fastened
STEP 8
Carefully turn chest over and attach backer and levelling feet
Estimated Time: 4 minutes
Nail backer as indicated. You may
have more nails than are necessary
Space evenly
from edge
Page 9 of 16
Hammer levelling
feet at the front and
back of each side
C
C
Position nails in the center of
the board

Drawer Parts Identification
D4
D3
D2
D2
Drawer Front (5)
DF-0476 maple
DF-0416 black
DF-0406 white
DF-0496 cherry
Left Drawer Side (5)
DS-0412-L
Plywood
Drawer Back (5)
DK-0415
unfinished
Right Drawer Side (5)
DS-0412-R
Plywood
Drawer Bottom (5)
DB-0415
unfinished
D5
D1 D4
D3
D1
D5
Page 10 of 16

Par s if ca ioCabinet t Ident itn
STEP 9 Estimated Time: 5 minutes PER DRAWER
Insert cams into drawer sides
Screw green twister dowels into drawer fronts
9a
9b
D3
D2
D1
Left Drawer Side Right Drawer Side
Make sure arrow
faces toward hole for
twister dowel
Page 11 of 16

1½” Hi Lo Screws
P r s f aCabinet a t Identi ic tion
9c
Attach drawer sides to drawer back with 1½” Hi Lo screws
9d
Attach drawer front and tighten cams
using a flat head screwdriver
Right Drawer Side
Locked
Turn 210°
Unlocked
Left Drawer Side
Unlocked
Page 12 of 16
Locked
Turn 210°

9e
Turn drawer upside down and slide drawer bottom into grooves
9f
Secure the drawer bottom to the drawer back with nails
Use 4 nails
per drawer
Page 13 of 16
C

9g
Attach drawer slides to left and right drawer sides using drawer slide screws
Machine Screw
9h
Attach knobs with machine screws
Right Drawer Side
Left Drawer Side
Page 14 of 16
Drawer
Slide
Screws

STEP 10
Insert drawers
Estimated Time: 2 minutes
Page 15 of 16
A.
B.
Note: When drawers are installed correctly, you will not be able to
remove them without first lifting up the drawer front.
DrawerCabinet

Attach one end of safety strap
to one of the sides
Attach the other end to the wall
Wall
Secure product to wall using the Safety Strap
and a screw suitable for your wall (Not
supplied)*
We recommend you screw into a stud. If you
cannot locate a stud use a wall anchor
appropriate for your type of wall.
¾” screw provided
Use screw suitable for
your wall (not supplied)*
Top
Wall
Backer
CALL US
1-877-PREPAC1 (1-877-773-7221)
Mon - Fri 7am - 4pm PST
10am - 7pm EST
Email Us: [email protected]
Pull remaining strap to tighten
Tighten
Serrez
Tighten
Attaching and Using the Safety Strap
Q. How do I clean your products?
A. We recommend that you simply wipe your products with a clean, damp cloth and then dry immediately with
another clean cloth to maximize the life span and look of your unit
Q. Can I paint or varnish your products?
A. Our products are made from durable composite woods with a laminate finish and therefore should not be
painted or varnished.
Q. Are they waterproof?
A. NO. If liquid is spilled and quickly wiped up, no damage will be done to your product. However, continuous
exposure to liquids or high humidity may cause damage to the board.
Give Us Your Feedback
Furniture Care Q&A
STEP 11
Page 16 of 16
We strongly recommend using a safety strap on all
furniture, especially if small children have access
Thanks!