Prepac EHW-0800-1 User manual

Caution
Do not over
tighten any screw.
The last few turns
of each screw
should be done
very slowly or by
hand.
Required Tools
stud
finder
3/16th inch drill bit
CONTACT US FIRST
[email protected]
1-877-PREPAC1
1-877-773-7221
Mon - Fri 7am - 4pm PST
10am - 7pm EST
For help with assembly
If you have received a damaged or defective
part or are missing hardware.
We will process replacement parts in 2 business
days or less. Parts are shipped via UPS Ground or
mail.
Before you call please:
1) Record the following information from the
shipping label on the outside of the box.
You will need it for warranty purposes:
Ship To Name
Sales Order Number
2) Note the product model number.
3) Review the contents of your shipment to
determine what you are missing.
•
•
Traditional
Floating Desk
Model # EHW-0800-1
Online Option
Fill out the Replacement Parts Order form in the Product
Support section of our website: www.prepacmfg.com
Assembly Instructions
Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4
2 Person Installation Required
DATE STAMP
Total Maximum
Weight
100 lbs
LB-0745
2014-06-09
Scan the
QR code
to view an
installation
video for
this product

Page 2 of 20
D1
Top (1)
TP-10059-E espresso
D2
Upper Gables (2)
GA-10064-E espresso
D3
Top Shelf (1)
SH-10058-E espresso
D4
Small Top Stabilizers (2)
ST-10071-E espresso
D5
Large Top Stabilizer (1)
TR-10036-E espresso
D6
Upper Left Side (1)
SL-10061-E espresso
D7
Small Upper Shelves (2)
SH-10059-E espresso
D8
Small Lower Shelves (2)
SF-10045-E espresso
D9
Inner Left Side (1)
SL-10062-E espresso
D10
Inner Right Side (1)
SR-10062-E espresso
D11
Upper Right Side (1)
SR-10061-E espresso
D12
Lower Left Side (1)
SL-10063-E espresso
D13
Desktop (1)
TP-10060-E espresso
D14
Lower Right Side (1)
SR-10063-E espresso
Desk Parts
D1
D4
D6
D5
D2
D3
D7
D2
D4
D7
D8
D9
D10
D12
D11
D15 D16 D17 D18 D19
Bottom Shelf (1)
SH-10037 unfinished
Bottom Stabilizer
ST-10073 espresso
Bottom Left Gable (1)
GA-10065-E espresso
Bottom Right Gable (1)
GA-10066-E espresso
Sm Bottom Shelves (2)
SH-10061-E espresso
D8
D13
D14
D16
D15
D17
D19
D18
D19

Page 3 of 20
3’’ Wood Screw (3)
RM-0835
Allen Key Bit (1)
RM-0923
Allen Key
RM-0313
Rail Hook (4)
RM-0834
Desk Hardware
Metal Wall Mounting Rail (1)
RM-0832
Grommet (1)
RM-0838
AVANT DE COMMENCER
Identifier toutes les pièces et le matériel afin de
s’assurer que tout est inclus.
Confirmat Screw (8)
RM-0001
24mm Green
Twister Dowel (48)
RM-0501
15mm Zinc Cam (48)
RM-0103
Plastic Dowel (3)
RM-0072
35 mm Connecting Bolt (8)
RM-0846 black
JRN Nut (4)
RM-0312
Spacers (4)
RM-0841
Shelf Support (8)
RM-0229 espresso
50mm JCB Bolt (4)
RM-0814 black
Screw Cover Cap (2)
RM-0008 espresso
Cam Cap (16)
RM-0806 espresso
Nylon Lock Nut (8)
RM-0837

Page 4 of 20
1a
ONLINE
HELP
To see a video showing how to use cams and connectors,
visit the Product Support page on our website:
www.prepacmfg.com/support/assembly.html
STEP 1 Estimated Time: 5 minutes
Insert cams and green twister
dowels into the Top Shelf (D3)
Insert cams in the unlocked position,
with the opening facing toward the
hole for the twister dowel.
Steps 1 - 8
Assemble the Upper Section of the Desk
BEFORE YOU BEGIN
Layout and identify ALL parts and hardware to ensure everything is included.
D3

Page 5 of 20
Insert cams into
Upper Gables (D2)
STEP 2 Estimated Time: 10 minutes
2a
Attach Top Shelf (D3) to Upper Gables
(D2) with Confirmat Screws
2b
D2
D2
D2
D2
D3
Finished
Edge
at Front

Page 6 of 20
STEP 3 Estimated Time: 10 minutes
3a
3b Attach Rail Hooks to the inside
of the Left (D6) and Right
(D11) Sides.
Insert cams and green twister
dowels into the Left (D6) and
Right (D11) Sides.
Nylon
Lock Nut
Spacers
Rail Hook
35mm
JCB Bolt
D11
D6

Page 7 of 20
Connect the Left (D6) and Right (D11) Sides
to the Top Shelf (D3) and tighten cams
Insert cams into Small Upper
Shelves (D7)
STEP 4 Estimated Time: 10 minutes
4a
4b
D11
D6
D2
D2
D3
D7
D7
Tightening Cams
Front

Page 8 of 20
Connect both Small Upper Shelves (D7)
to the Left (D6) and Right (D11) Sides and
tighten cams
STEP 5 Estimated Time: 10 minutes
5a
5b
D11
D6
D7
D7
D9
D10
Attach Rail Hooks to
the inside of the Inner
Left (D9) and Right
(D10) Sides.
5c
Insert cams and green twister
dowels into the Inner Left (D9)
and Right (D10) Sides.
Nylon
Lock Nut
Rail Hook
35mm
JCB Bolt
Front

Page 9 of 20
D1
Connect the Inner Left (D9) and Right (D10)
Sides to the Top Shelf (D3) and Small Upper
Shelves (D7) and tighten cams
Insert green twister dowels
into the Top (D1)
STEP 6 Estimated Time: 10 minutes
6a
6b
D7
D7
D9
D10
D3
Front

Page 10 of 20
Attach the Top (D1) to the Left (D6) and
Right (D11) Sides and Upper Gables (D2)
and tighten cams
Insert green twister dow-
els into the Desktop (D13)
where shown
STEP 7 Estimated Time: 10 minutes
7a
7b
D1
D11
D6
D13
D2
D2

Page 11 of 20
Attach the Desktop (D13)
STEP 8 Estimated Time: 10 minutes
D13
D11
D6
D9
D10
Use Confirmat Screws to attach to the Left (D6) and Right
(D11) Sides
Use JRN Nuts and 50mm JCB Bolts to attach to the Inner
Left (D9) and Right (D10) Sides using the supplied Allen Key
JCB Bolt
JRN Nut
Confirmat Screw
50mm JCB Bolt
JRN Nut
Allen Key

Page 12 of 20
Insert cams and green twister dowels into the LOWER
Left (D12) and Right (D13) Sides
Insert cams into Bottom Stabilizer
(D16)
Steps 9 - 11
Assemble the Lower Section of the Desk
STEP 9 Estimated Time: 10 minutes
9a
9b
D12
D14
D16

Page 13 of 20
Insert cams into Bottom Shelf (D15)
Connect both Lower Left (D12) and Right
(D13) Sides to the Bottom Shelf (D15) and
Bottom Stabilizer (D16) and tighten cams
STEP 10 Estimated Time: 10 minutes
10a
10b
D15
D12
D14
D16
D15

Page 14 of 20
Insert cams into Small Bottom Shelves (D19)
Insert cams and Green Twister Dowels into
Bottom Left (D17) and Right (D18) Gables
11a
11b Position parts as shown below
Attach the Small Bottom Shelves (D19) to:
nthe Lower Left (D12) and Lower Right (D14) Sides
nthe Bottom Left (D17) and Bottom Right (D18) Gables.
Tighten cams.
NOTE: The Gables ARE NOT
attached to the Bottom Stabilizer
STEP 11 Estimated Time: 10 minutes
D17
D18
D19
D19
D12
D14
D17
D18
D19
D19

Page 15 of 20
STEP 12 Estimated Time: 10 minutes
Attach the Lower Section of the
desk to the Upper Section and
tighten all cams
12a
12b
Carefully turn the desk on
its side to tighten the 2
cams at the back

Page 16 of 20
13a
Hanging the Desk
2 people required
ONLINE
HELP
To see a how-to installation video, click on
“How to Install products with Prepac’s Metal
Wall Hanging System” on the Assembly page
in the Support section of our website:
www.prepacmfg.com/content/assembly
or scan the QR code below
Read through all installation
steps before beginning
Location:
Make sure you are able to attach it to 3 wall
studs.
Make sure you are close to electrical and
cable outlets.
STEP 13 Estimated Time: 30 minutes
Height
Typically, desk surfaces are between 28 - 30
inches from the floor.
Consider
nHow much leg room you need
nWhat is a comforatable height for your
keyboard / monitor or laptop
nWhether your chair is adjustable
nHow many people will be using the desk
Bottom of metal
rail is 46.5” from
the floor
FLOOR
Leg
Clearnace
Height 28”
46.5”
Determine the location and the height to
mount your Traditional Floating Desk
As an example, the following
steps show the desk mounted
with a leg clearance of 28
inches from the floor.

Page 17 of 20
13b Measure 46.5 inches from the floor
and make 3 to 4 marks along the wall
13c
16”
53”
Find the center of the wall studs and mark
the location of each stud along the line.
Studs are typically 16 inches apart center
to center.
13d Using the bottom of the metal track as a guide,
draw a line to connect the marks and make
sure the line is level. This line is where the
bottom of your Metal Track will be mounted.
Make a mark to indicate the center of
the slot on the Metal Track in line with
each of the marks you made to identify
the studs.
13e
mark to
identify
stud

Page 18 of 20
Attach the metal rail and screw
the 3 inch wood screws into the
pre drilled holes with the Allen
Key provided
13g
Set the rail aside and pre-drill
holes 3 inches deep at the
locations you had marked.
Use a 3/16th inch drill bit
13f
3/16th inch drill bit
For faster installation, use
the hexagonal bit with a drill
or power screwdriver

Page 19 of 20
Carefully hang the desk onto the Metal Track
until it locks into place.
13h
T
R
2 PEOPLE REQUIRED

Page 20 of 20
CALL US
1-877-PREPAC1 (1-877-773-7221)
Mon - Fri 7am - 4pm PST
10am - 7pm EST
Email Us: [email protected]
Give Us Your Feedback Faites-nous part de vos
commentaires
Écrivez-nous à :
[email protected]
Thanks! Merci!
STEP 14 Estimated Time: 10 minutes
Insert grommit into the hole at
the back of the Desktop (D13)
14a
14c
Insert Black Plastic Dowels into the the Large Top Stabilizer (D5)
and attach to the Top Shelf (D3) by applying firm pressure
Cover visible screw caps
and cams with screw or
cam cover caps
14b Push Small Top Stabilizers (D4) towards the back of the desk
until it touches the Metal Rail
Insert shelf supports and add
Small Lower Shelves (D8)
14d
14d
D3 D4
D8
D13
D4
D8
D5