Prepac SH-6643 User manual

Double / Queen
Headboard
Required Tools
Screwdrivers
Flat Head
Using a power screwdriver
will speed up assembly.
Caution
Do not over tighten any screw.
The last few turns of each screw
should be done very slowly or by hand.
Phillips Head
Optional Tools
DATE STAMP
Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4
LB-0532-R
2007-06-20
Online Option:
Fill out the Parts Order Form on our website.
Go to www.prepacmfg.com and choose
Parts Order from the Support menu
Model # SH-6643
Assembly Instructions
For the following collections:
Sonoma, Monterey, Montego,
Broadway, Chelsea, Winslow
CALL US FIRST
1-877-PREPAC1
1-877-773-7221
Mon - Fri 7am - 4pm PST
10am - 7pm EST
•For help with assembly
•If you have received a damaged or defective part or
are missing hardware.
We will process replacement parts
UPS Ground or mail.
Before you call please:
2) Note the
3) Review the contents of your shipment to determine
what you are missing. This unit is shipped in 2
cartons. Make sure you have received both.
in 2 business days or
less. Parts are shipped via
1) Record the following information from the shipping
label on the outside of the box. You will need it for
warranty purposes:
•Ship To Name
•Sales Order Number
product model number.
Hammer
This product is shipped in
1 carton
1 of 1

¾” Nail (24)
RM-0022
15mm Zinc Cam (16)
RM-0103
Levelling Feet (4)
RM-0139
Green Twister Dowel (16)
RM-0501
2" Confirmat Screws (4)
RM-0001
Hardware Identification
Page 2 of 16
Plastic Dowels (14)
RM-0072
Metal Dowel Pins (4)
RM-0014
#8 - 9/16" Washerhead
Screws (4)
RM-0521
Safety Bracket (2)
RM-0515
Headboard Parts
Left Side (1)
SL-0770 Maple
SL-0700 White
SL-0710 Black
SL-0790 Cherry
SL-0760 Espresso
Top (1)
TP-0710 Black
TP-0790 Cherry
TP-0760 Espresso
TP-0770 Maple
TP- 0700 White
Top Molding (1)
TR-0771 Maple
TR-0701 White
TR-0711 Black
TR-0791 Cherry
TR-0761 Espresso
Left Gable (1)
GA-0770 Maple
GA-0710 Black
GA-0790 Cherry
GA-0760 Espresso
GA-0700 White
Right Gable (1)
GA-0771 Maple
GA-0701 White
GA-0711 Black
GA-0791 Cherry
GA-0761 Espresso
Adjustable Shelf (1)
SH-0294 Maple
SH-0702 White
SH-0214 Black
SH-0792 Cherry
SH-0264 Espresso
Fixed Shelf (1)
SH-0770 Maple
SH-0700 White
SH-0710 Black
SH-0790 Cherry
SH-0760 Espresso
Side Molding (2)
TR-0770 Maple
TR-0700 White
TR-0710 Black
TR-0790 Cherry
TR-0760 Espresso
Stabilizer (2)
ST-0770 Maple
ST-0700 White
ST-0710 Black
ST-0790 Cherry
ST-0760 Espresso
Right Side (1)
SR-0770 Maple
SR-0700 White
SR-0710 Black
SR-0790 Cherry
SR-0760 Espresso
Backer (1)
BB- 9708 Maple
BB-0121 White
BB- 0113 Black
BB-4002 Cherry
BB-9608 Espresso
C1
C8
C3
C6 C7
C2
C9
C5
C4
C10 C11
C1
C8
C3
C6
C7
C2
C9
C5
C4
C10 C11
C7

Page 3 of 16
STEP 1
Insert cams into all pieces
Estimated Time: 5 minutes
1a
1b
Stabilizers
Lie stabilizers and fixed shelf on the floor
Finished Edge
(Front)
Fixed Shelf
NOTE: Shaded areas represent the
UNFINISHED side of the piece.

Page 4 of 16
STEP 2
Insert cams into holes on the top of the left and right sides
Estimated Time: 5 minutes
2a
2b Insert green twister dowels into remaining holes on the left and right sides
Left Side
Right Side
There are 3 hole on the front
edge of the left and right sides.
There are 3 hole on the front
edge of the left and right sides.
IMPORTANT: Identify the front edge of the
left and right sides before starting Step 3

Page 5 of 16
STEP 3 Estimated Time: 5 minutes
Attach ONE SIDE ONLY to both stabilizers and to the fixed shelf. Tighten cams
slightly. Make sure the stabilzers and shelf are positioned squarely with the side.
Fully tighten cams using a flathead screwdriver.
Position the fixed shelf as shown with the finished edge on the floor. Position both
stabilizers with the finished side down.
Left
Side
Stabilizers
Fixed Shelf
Finished Edge
(Front)
Unlocked Locked
Turn 210°
Tightening Cams

Page 6 of 16
STEP 4 Estimated Time: 5 minutes
Repeat to attach the 2nd side. Make sure the pieces are square
Fixed Shelf
Unlocked Locked
Turn 210°
Tightening Cams

Page 7 of 16
Stabilizers
Fixed Shelf
STEP 5 Estimated Time: 5 minutes
Hammer levelling feet to the
bottom of each side.
Attach “L” brackets with Washerhead Screws to
secure front panels to fixed shelf
5a
5b
#8 - 9/16"
Washerhead Screws
OR
Levelling
Feet

Page 8 of 16
STEP 6 Estimated Time: 4 minutes
GENTLY hammer plastic dowels HALFWAY into all
holes on the underside of the top
Position the gables so the finished edge faces the finished edge
of the top and the shelf holes face inwards. Then press down
firmly until they are attached.
6a
6b
Front
Finished Edge
(Front)
Finished Edge
(Front)
Shelf Holes
Front

Page 9 of 16
Par s if ca ioCabinet t Ident itn
STEP 7 Estimated Time: 5 minutes
Position the front molding in place
and press down firmly to secure.
bnPartsIden ifica ionCa i et t t
STEP 8 Estimated Time: 5 minutes
Screw in green twister dowels into remaining holes on the top

Page 10 of 16
Par s if ca ioCabinet t Ident itn
STEP 9 Estimated Time: 5 minutes
Lower top and gables onto left and right
sides and tighten cams
Unlocked Locked
Turn 210°
Tightening Cams
FRONT

Page 11 of 16
STEP 10 Estimated Time: 5 minutes
Attach gables to fixed shelf with Confirmat screws
Confirmat
Screws
FRONT

Page 12 of 16
Par s if ca ioCabinet t Ident itn
STEP 11 Estimated Time: 5 minutes
Attach Backer with nails
C
C
Position nails in the center of
the board

Page 13 of 16
Hammer plastic dowels halfway into side moldings
Par s if ca ioCabinet t Ident itn
STEP 12 Estimated Time: 5 minutes
Firmly press side molding into place .
12a
12b

Page 14 of 16
Par s if ca ioCabinet t Ident itn Par s if ca ioCabinet t Ident itn
STEP 13 Estimated Time: 5 minutes
Insert metal dowels into shelf holes and add shelf
Insérez les goujons de métal dans les trous des
tablettes et posez les tablettes. metal dowel
Cabinet PartsIdentification Cabinet PartsIdentification
STEP 14 Estimated Time: 10 minutes
We recommend you secure the Headboard to your bed frame to
increase stability, particulary if your bed is on castors.
Stabilizers are NOT pre-drilled because of the wide variation in
bed frame heights and hole s.
You will need to drill holes in the bottom stabilizer of the
headboard in line with your bed frame.
position
Position bed frame against headboard and mark
the location of the bedf rame.
a.
b.
c.
Have someone hold the headboard to keep it steady
and drill holes into the headboard.
Attach Headboard to your bed frame
Attach using bolts supplied with bed frame
Bed frame

Page 15 of 16
THIS PAGE INTENTIONALLY LEFT BLANK

CALL US
1-877-PREPAC1 (1-877-773-7221)
Mon - Fri 7am - 4pm PST
10am - 7pm EST
Email Us: [email protected]
Q. How do I clean your products?
A. We recommend that you simply wipe your products with a clean, damp cloth and then dry immediately with
another clean cloth to maximize the life span and look of your unit
Q. Can I paint or varnish your products?
A. Our products are made from durable composite woods with a laminate finish and therefore should not be
painted or varnished.
Q. Are they waterproof?
A. NO. If liquid is spilled and quickly wiped up, no damage will be done to your product. However, continuous
exposure to liquids or high humidity may cause damage to the board.
Give Us Your Feedback
Furniture Care Q&A
Page 16 of 16
Thanks!