Pro-Elec PEL00828 User manual

1
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
• When using electrical appliances basic safety precautions should always be
followed.
• Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
Safety Information for Installation and Operation
• Avoid excessive force when installing.
• Always install on a surface that can support the weight of the xture.
Plastic Garden Lamp
Model: PEL00828

2
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area.
Made in China. PR2 9PP
Man Rev 1.0
SPECIFICATIONS
CLEANING AND MAINTENANCE
• Clean only with a soft, dry cloth. Do not use any chemicals, abrasives or solvents
that may damage the product.
INSTALLATION
5
2
1
4
Voltage 220-240V~50Hz
IP rating IP44
Lamp type E27 11W Fluorescent or LED
• Turn off or isolate the mains supply.
• Feed the supply wiring through the access point in
the main body.
• Mount the main body onto the wall or ceiling using a
suitable mounting method.
• Connect the positive supply wire (brown or red) to
the lamp holder terminal marked L.
• Connect the neutral supply wire (blue or black) to the
lamp holder terminal marked N.
• Fit an appropriate lamp E27 Max 11W (not supplied).
• Place the diffuser onto the main body aligning the
screw position cut outs.
• Attach the diffuser cover onto the main body by
lining up the three screw positions then t and
tighten the screws.
• Restore the mains supply.
3
6
Blue
Brown