Pro-Elec PELL0054 User manual

1
2 in 1 Magnier Lamp
Model PELL0054

2
Please read these instructions carefully before starting installation and retain for
future reference.
IMPORTANT SAFETY INFORMATION
• The main body of the lamp can be used either with the desk clamp or the mounting
base.
• Attach the stem to the base or the clamp by inserting the end tting and turning to
lock into place.
• Connect the output lead from the PSU to the connector socket on the stem lower
end tting then plug the PSU into the mains and switch the supply on.
• Adjust the position and angle of the lamp as required by exing the lamp stem.
INSTALLATION
• This product contains glass, care must be taken when assembling or handling to
prevent injury or damage to the product.
• Keep away from direct sunlight.
• This product is suitable for connection to a 220-240V~ 50Hz.
• This product is for indoor use only.
• Only use the PSU supplied with the luminaire or one of identical specication.
CLEANING AND MAINTENANCE
SPECIFICATIONS
Input voltage: 220-240V~50Hz
Rated power: 6W
PSU output: 20V DC
Lamps: SMD LEDs x 30 pcs
• Clean the product with a soft, dry cloth only. Do not use any solvents or abrasive
chemical cleaners.
• The LED’s in this product are non-replaceable.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area. Made in China. PR2 9PP
Man Rev 1.0