Pro-Elec PELL0016 User manual

MOTION SENSOR LED LIGHT
PELL0016
Please read these instructions carefully before use and retain for future reference.
• Avoid locations of high temperature or humidity.
• If the light output becomes less bright or ashes, replace the batteries.
• Always remove the batteries if the light is not to be used for long periods.
• Never mix new and old batteries or mix different battery types.
• Unscrew the lens unit from the main body and insert the batteries into the holder
noting the correct polarity.
• Replace the lens unit and turn clockwise to lock into place.
IMPORTANT SAFETY INFORMATION
INSTALLATION

OPERATION
MAINTENANCE
SPECIFICATION
• The motion sensor will turn on the light when movement is detected only in low light
environments.
• After motion ceases to be detected, the light will
extinguish after 25 seconds.
• Clean the unit only with a soft dry cloth. Do not use any chemicals, abrasives or
solvents that could damage the casing or lens.
Power supply: 4×AA batteries (NOT included)
Material: ABS, PMMA
Light Source: 2×SMD5730 LED
Output power: 80 lumen
Ambient light: <10LUX
Sensor distance: 0-5m
Sensor angle: 120°
Time delay: 25±2 sec (Auto-delay function)
Product weight: 110g
Product size H x W x D: 82x72x110mm
IP rating IP44
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.0
• Drill the wall or ceiling in the required location with regard to any concealed wiring
or pipework, use a wall plug if required and screw in a dome head screw leaving the
head 4mm proud of the surface.
• Locate the keyhole slot in the base of the light unit over the screw head and ensure
the light is securely xed.
• Adjust the angle of the head unit as required.