Pro-Form fusion 2.1t User manual

Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
V
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Model No. PFBE1716.0
Serial No.
Write the serial number in the
space above for future reference.
QUESTIONS?
As a manufacturer,we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.proformservice.com
USER’S MANUAL
Serial Number Decal (Under Seat)

2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
TABLE OF CONTENTS
PROFORM is a registered trademark of ICON IP, Inc.

3
1. Read all instructions in this manual before
using the exercise rack. Use the exercise
rack only as described in this manual.
2. It is the responsibility of the owner to ensure
that all users of the exercise rack are ade-
quately informed of all precautions.
3. The exercise rack is intended for home use
only. Do not use the exercise rack in any
commercial, rental, or institutional setting.
4.
Keep the exercise rack indoors, away from
moisture and dust. Do not put the exercise
rack
in a garage or covered patio, or near
water.
5. Use the exercise rack only on a level surface.
Cover the floor beneath the exercise rack to
protect the floor.
6. Keep children under 12 and pets away from
the exercise rack at all times.
7. Make sure all parts are properly tightened
each time the exercise rack is used. Replace
any worn parts immediately.
8. Always make sure that the pins and knobs
are fully engaged before using the exercise
rack.
9.
Never use the knee pad without at least one
resistance band connecting the support
frame to the pivot arm.
10. Always wear athletic shoes for foot protec-
tion while exercising.
11.
The exercise rack is designed to support a
maximum user weight of 300 pounds.
12. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
13.
The decals shown here have been placed on
the exercise rack. If a decal is missing or
illegible, call the toll-free telephone number
on the front cover of this manual and order a
free replacement decal. Apply the decal in the
location shown.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the exercise rack.
IMPORTANT PRECAUTIONS
Keep hands and
fingers clear of
this area.

4
Adjustment Pin
Arm Rest
Dip Handle
Right Side
Left Side
Note: The terms “right side” and “left side” are determined relative to a person with his back to
the backrest; they do not correspond to right and left on the drawings in this manual.
Backrest
Resistance Band
Adjustment Pin
Push-up Handle
Knee Pad
Pull-up Handle
BEFORE YOU BEGIN
Thank you for selecting the versatile PROFORM®
FUSION 2.1 T exercise rack. The exercise rack is
designed to develop the abdominal muscle group.
Whether your goal is to tone your body, build dramatic
muscle size and strength, or improve your cardiovas-
cular system, the exercise rack will help you to
achieve the specific results you want.
For your benefit, read this manual carefully before
using the exercise rack. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before calling. The model
number is PFBE1716.0. The serial number can be
found on a decal attached to the exercise rack (see
the front cover of this manual for the location of the
decal).
To avoid a registration fee for any service needed
under warranty, you must register the exercise
rack at www.proformservice.com/registration.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Assembled Dimensions:
Height: 82 in. / 208 cm
Width: 42 in. / 107 cm
Depth: 48 in. / 122 cm

5
M6 Washer (36)
M8 Washer (37) M10 Nylon
Locknut (35)
M8 x 15mm
Button Screw (39)
M8 x 25mm
Shoulder Bolt (44)
M8 x 62mm Button Screw (41)
M10 x 90mm Button Bolt (42)
M8 x 20mm Button
Screw (43)
M6 x 70mm Screw (45)
M6 x 43mm Button
Screw (46)
M6 x 75mm Button Screw (47)
M10 x 53mm Button Bolt (40)
M10 x 62mm Button Bolt (30)
M10 x 100mm Button Bolt (31)
M4 x 25mm
Screw (48)
M4 x 12mm
Screw (49)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 18 of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. If a part
is missing, call the toll-free telephone number on the front cover of this manual.

1. Attach two Base Pads (23) to the Base (1) with
two M4 x 25mm Screws (48).
Insert two M10 x 90mm Button Bolts (42) up
through the Base (1). It may be helpful to place
tape over the bolt heads to hold them in place.
2. Press a Base Cap (22) onto a Base Leg (2).
Repeat with the other Base Leg.
Insert the two Base Legs (2) into the Base (1) as
shown. Insert four M10 x 90mm Button Bolts (42)
up through the Base. It may be helpful to place
tape over the bolt heads to hold them in
place.
2
1
2
1
42
23
23
48
48
42
42
1
2
22
6
Before beginning assembly, carefully read the
following information and instructions:
•Assembly requires two people.
•Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
•Tighten all parts as you assemble them, unless
instructed to do otherwise.
•As you assemble the exercise rack, make sure all
parts are oriented as shown in the drawings.
•For help identifying small parts, use the PART
IDENTIFICATION CHART.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One rubber mallet
• One Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the exercise rack can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile exercise rack has many
parts and that the assembly process will take
time. Most people find that by setting aside plen-
ty of time, assembly will go smoothly.
ASSEMBLY

7
3. Attach the Rear Upright (5) to the Base (1) using
the indicated M10 x 90mm Button Bolts (42) and
two M10 Nylon Locknuts (35). Donot tighten the
Nylon Locknuts yet.
4. Attach the Rear Top Frame (6) to the Rear
Upright (5) with two M10 x 90mm Button Bolts
(42) and two M10 Nylon Locknuts (35). Do not
tighten the Nylon Locknuts yet.
5
3
35
35
42 1
6
35
42
4
5

8
5. Attach the Left Front Upright (50) to the Base (1)
using the indicated M10 x 90mm Button Bolts
(42) and two M10 Nylon Locknuts (35). Donot
tighten the Nylon Locknuts yet.
Attach the Right Front Upright (3) In the same
manner.
6. Slide the Front Top Frame (4) onto the Left and
Right Front Uprights (50, 3).
3
5
6
50
1
42
35
35
4
3
50

9
7. Attach the Backrest Support (8) to the Rear
Upright (5) with an M10 x 62mm Button Bolt (30)
and an M10 Nylon Locknut (35). Donot tighten
the Nylon Locknut yet.
Attach the Backrest Support (8) to the Front Top
Frame (4) with four M10 x 53mm Button Bolts
(40) and four M10 Nylon Locknuts (35).
8. Insert the Pull-up Frame (7) into the Rear To p
Frame (6). Attach the Pull-up Frame to the Rear
Top Frame with four M8 x 15mm Button Screws
(39) and two M8 x 62mm Button Screws (41).
Tighten the M10 Nylon Locknuts (35) used in
steps 2–8.
7
8
4
35
35
8
30
35
40
40
40
5
39
39
41
41
39
6
7
9. Attach a Pull-up Handle (12) to the Pull-up Frame
(7) with four M8 x 20mm Button Screws (43).
Slide a Pull-up Handle Cap (28) over the Pull-up
Handle and press the Pull-up Handle Cap into the
Pull-up Frame.
Attach the other Pull-up Handle (12) to the
Pull-up Frame (7) in the same manner.
12
12
43
28 7
9
43

10
12. Fully insert an Adjustment Pin (29) through the
indicated hole in the Rear Upright (5) and through
the Assist Arm (9).
Attach the tether on the Adjustment Pin (29) to
the Rear Upright (5) with an M4 x 12mm Screw
(49).
11. Attach the Knee Pad Cover (14) and the Knee
Pad (15) to the Pad Frame (11) with two M6 x
75mm Button Screws (47) and two M6 Washers
(36).
11
12
47
14
15
11
47
36
49
29
5
9
10. Attach the Pad Frame (11) to the Assist Arm (9)
with two M8 x 20mm Button Screws (43), two M8
Washers (37), and two 5mm Spacers (38).
10
9
11
43
43
37
37
38
38