PRO SIGNAL PSG3425 User manual

1
4K 60Hz 2 PORT HDMI EXTENDER SPLITTER 30M
PSG3425

2
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent re or shock hazard, do not expose this product to rain or moisture.
• Check that the power supply matches the mains voltage.
• Only use the power supply provided or one of identical specication.
• Ensure the IR remote extender cables are connected to the correct devices.
• Beware of static electricity which may damage the device. Use ESD precautions
when installing.
• Do not plug or unplug cables while the devices are powered on.
WHAT'S INCLUDED
• Transmitter x1 and Receiver x2
• Power Adapter 230VAC to 12VDC 2A
• Operation Manual
• IR remote extender
• IR remote receiver x2
• Plug and play.
• Can be wall mounted for easy installation.
• 4K@60Hz HDMI signal can be transmitted <30 meters through a CAT6/6A/7
network cable and <60m at 1080p@60Hz
• Transmitter support one HDMI loop-out.
• Support bi-directional IR passback function (20-60KHz).
• Both receivers can be powered by the transmitter via network cable.
• Lightning Protection, Surge Protection, ESD Protection.
This HDMI Extender includes a transmitter unit and a receiver unit, allows an HDMI
signal to be transmitted to 2 displays up to 30 meters at 4K resolution using a
CAT6/6A/7 network cable.
Requirements:
1. HDMI source device (PC, DVD, PS3) HD monitoring equipment etc.
2. HDMI display device like SDTV, HDTV, projector with HDMI port.
NOTE: It is recommended to use a high quality network cable to avoid signal loss and
crosstalk.
OVERVIEW
FEATURES
Transmitter

3
Receiver
1. Reset Button Press to restart the device
2. RJ45 signal input Connect with CAT6 or better network cable
3. Power/Signal
indicator
Power LED illuminates when connect with the power
adapter. Red light indicates no image transmission, blue light
indicates data is being transmitted
4. 5VDC input Connect with 12VDC/1A power adapter (optional)
5. HDMI output Connect with HDMI display device
6. IR signal in Connect with IR receiver extension cable, please make sure
the remote control used is within the effective range
1. Power input Connect with DC12V/2A power adapter (supplied)
2. IR signal output Connect with IR transmitter extension cable, face the emitter
towards the source device IR receiver panel
3 HDMI input Connect with the source device
4. HDMI output Connect with HDMI display device
5. RJ45 signal output Connect to CAT6 or better network cable
6. Power/signal LED Power LED illuminates when connect with the power
adapter. Red light indicates no image transmission, blue light
indicates data is being transmitted
7. Reset Press to

4
INSTALLATION
• Connect the source device to the HDMI in port of the transmitter with an HDMI
cable, and connect the HDMI out port of the receivers to each display device with a
second HDMI cable.
• Connect the CAT out port of the transmitter and the CAT in port of the receivers via
a network cable (CAT6/CAT6A/CAT7).
If using HDMI loop out, connect the display device to the HDMI OUT port of the
transmitter.
• Plug the power supply into the transmitter and connect to the mains supply.
Note: If the network cable is too short, there may be no display output because the
signal is too strong. If the cable is too long, the output may degrade.
CAT CABLE REQUIREMENT
Follow the standard of IEEE-568B, It is recommended to select a high quality network
cable with less loss and crosstalk.

5
SPECIFICATIONS
Voltage/Current DC 12V/2A
Power consumption TX: <12W RX: <6W
HDMI compliance HDMI 2.0
HDCP compliance HDCP 2.2
Supported resolutions 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
3840x2140@30/60Hz
IR signal Supports 20~60KHz IR device
CAT6/6A/7 <30m
Working temperature 0~60°C
Storage temperature -20~70°C
Humidity 0~90%RH (no condensation)
Dimension TX: 161.6(L) x 85.3(W) x 31.0(H)mm
RX: 101.0(L) x 81.6(W) x 20.6(H)mm
Material Alloy
Weight TX: 410g RX: 190g
IR User Guide:
• IR receiver extension cables should be connected to the IR IN port of the receivers.
Only use one remote control in one location at a time to avoid conict.
• The IR emitter extension cable should be connected to the IR OUT port of the
transmitter.
• The emitter of the IR extension cable should face as close as possible to the IR
receiving window of the source device.
• Face the receiving head of the IR receiver extension cable toward the user for
unobstructed line of sight to the remote control.
• The IR receiver detects the users remote control and transmits the signal down the
network cable to the IR emitter which replicates the IR output to control the source
device.
CLEANING & MAINTENANCE
Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area. Made in China. PR2 9PP
Man Rev 1.0