PRO SIGNAL PSG3453 User manual

1
HDMI EXTENDER OVER CAT5/6
PSG3453

2
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent re or shock hazard, do not expose this product to rain or moisture.
• Check that the power supply matches the mains voltage.
• Only use the power supply provided or one of identical specication.
• Ensure the IR remote extender cables are connected to the correct devices.
• Beware of static electricity which may damage the device. Use ESD precautions
when installing.
• Do not plug or unplug cables while the devices are powered on.
WHAT'S INCLUDED
• HDMI Extender and Receiver
• 2 x Power Adapter 230VAC to 5VDC 1A
• Operation Manual
• IR remote extender
• IR remote receiver
• Supports full HD 1080p@50/60Hz.
• Supports 1 to 1 and 1 to many.
• Transmission up to 120 metres.
• HDMI 1.3 and HDCP 1.4 compliant.
FEATURES
CAT CABLE REQUIREMENT
Follow the standard of IEEE-568B, It is recommended to select a high quality network
cable with less loss and crosstalk.
1 orange/white
2 orange
3 Green/white
4 Blue
5 Blue/white
6 Green
7 Brown/white
8 Brown
• This HDMI Extender allows a signal over a CAT6 up to 120 metres.
• IR passback with 20-60KHz frequency to control source device.
OVERVIEW

3
INSTALLATION
TRANSMITTER
1. Power LED - illuminates when power is on.
2. Data transmission LED - ashes when transmitting signal.
3. Connection indicator LED - illuminates to indicate connection to receiver is good.
4. Reset button - press to reset the device.
5. Power input - connect to PSU 5VDC output jack.
6. CAT network cable RJ45 output socket.
7. IR extender emitter connection.
8. HDMI output - connect with source monitor device.
9. HDMI input - connect with source device.

4
RECEIVER
1. Power LED - illuminates when power is on.
2. Data transmission LED - ashes when transmitting signal.
3. Connection indicator LED - illuminates to indicate connection to receiver is good.
4. Reset button - press to reset the device.
5. Power input - connect to PSU 5VDC output jack.
6. CAT network cable RJ45 socket.
7. IR extender receiver connection
8. HDMI output - connect with destination device.

5
IR User Guide:
• IR receiver extension cable should be connected to the IR IN port of the receiver.
• The IR emitter extension cable should be connected to the IR OUT port of the
transmitter.
• The emitter of the IR extension cable should face as close as possible to the IR
receiving window of the source device.
• Face the receiving head of the IR receiver extension cable toward the user for
unobstructed line of sight to the remote control.
• The IR receiver detects the users remote control and transmits the signal down the
network cable to the IR emitter which replicates the IR output to control the source
device.
OPERATION
• One to one connection with IR remote up to 120 metres over HQ CAT6 cable.

6
• One to many connection using router/switch over HQ CAT6 cable.
• LAN switch cascade by using the LAN switch/router to gain unlimited extension.

7
SPECIFICATIONS
Voltage/Current DC 5V 1A
Power consumption TX: <3.5W RX: <3W
HDMI compliance HDMI 1.3
HDCP compliance HDCP 1.4
HDMI input resolution 480i@60Hz, 480p@60Hz, 576i@50Hz, 576i@50Hz,
576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,
1080p@50/60Hz
Transmission length CAT5 80m / CAT5E 100m / CAT6 120m
Input/output cable length <5m (AWG24)
IR remote control Supports IR passback with 20-60KHz frequency
Transfer method Over UTP/STP CAT5/5e/6
Connector RJ45
Working temperature 0~60°C
Storage temperature -10~ 70°C
Humidity 0~90%RH (no condensation)
Dimension (RX & TX) 130(W) x 84(D) x 23.2(H)mm
Material Alloy
Weight TX: 205g RX: 200g
CLEANING & MAINTENANCE
Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.

8
Man Rev 1.0
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling of
the materials used. Contact your local authority for details of recycling schemes in your
area. Made in China.
PO Box 13362 Dublin 2
PR2 9PP