PROAIM Airwave Ultra User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Airwave Ultra Vibraon Isolator Arm (VI-ARWV-UT)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Airwave Ultra
Castle Wrench
Vibraon Isolator with Damper
2x Hex Nut
(Size:1/2”)
Air Filling Pump 1x Spanner (Size:21mm)

2
Airwave Ultra Isolator Arm Setup
• Loose both the knobs, as shown in the image.
• Airwave Ultra has been properly aached to
the scaold pole.
Flight Case
• Align the clamps of the Airwave to a scaold
pole, and then secure the clamp by properly
ghtening the clamp knobs.
• Now open both the clamps.
Airwave Ultra

3
• Now secure the Vibraon Isolator by
aaching the castle nut with the Airwave
Ultra.
• Loosen and remove the castle nut xed on
top of the Vibraon Isolator.
• Aach the Vibraon Isolator at the boom of
the Airwave Ultra, and then ghten the castle
nut to secure it.
• Use the castle wrench to ghten the castle
nut, as shown in the image.
• Turn the adjustment knob to move (le-right)
the lower part of the Vibraon Isolator.
• Turn the other adjustment knob to move
(front-back) the lower part of the Vibraon
Isolator.
Vibraon Isolator with Damper

4
• Now lock the blue locking knob aer using
Pressure Pump.
• Open the lock lever at the boom of
the Vibraon Isolator.
• Then aach the safe hook to the Gimbal
(Not Included).
• Now aach the gimbal to the Vibraon
Isolator by sliding and then pushing the
gimbal’s (Not Included) buon.
• Aach the air pressure pump with the washer
ed to the Airwave Ultra.
Air Filling Pump
Vibraon Isolator with Damper

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
YOUR PROAIM AIRWAVE ULTRA VIBRATION ISOLATOR ARM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)