PROAIM P-OHCR-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Clip-on Overhead Rig for DSLR Video
Camera Setups (P-OHCR-01)
Assembly Manua l
Rails
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
2 x Track Clamps 1 x Camera Mounng Plate

2
• Loosen the track clamp's knob and mount it
by inserng it into the baby pin.
Camera Setup
• Insert the track clamp into the baby pin and
ghten it properly with the help of a knob.
• Straighten the rails by opening them
manually.
• By pressing the pin, join the rails together.
• Aer joining the rails, it will be properly
straightened.
• Loosen both the knobs of the track clamp.

3
• Insert the rail on to the top part of the track
clamp.
• Secure by ghtening both the knobs together.
• Loosen the 4 knobs of the camera mounng
plate.
• Loosen the mounng plate.
• Then properly insert the rail in the camera
mounng plate, As shown in the image.
• Tighten the 4 knobs of the camera mounng
plate properly and insert it into the second
track clamp.

4
• Aer xing the rail properly into the clamp,
secure them by ghtening both the knobs
together.
• As shown in the image, the Rails are now
properly aached with the Track Clamp.
• Aach the camera on the camera mounng
plate with the help of camera bolt and secure
it properly.

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
YOUR PROAIM CLIP-ON OVERHEAD RIG FOR DSLR VIDEO CAMERA SETUPS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)