Progeny P66 User manual

Made in China
P66
Portable Power Station
USER GUIDE
[email protected]
Before using or storing,please read this manual carefully,and charge
your P66 with the included charging adapter
封底 封面

Introduction
Thank you for purcharsing Progeny Portable Power Station.Before
using or storing,please read this manual carefully,and charge your
P66 with the included charging adapter.If you have any questions
or issues,please contact our custoner services team for further
assistance.
Email: [email protected]
封面内页 前言

Button Definition
LED Display
a
a. Power b. AC switch c. LED light
BATTERY LEVEL
INPUT
d. USB switch e. LED switch f. DC switch
g. AC output h. LED display i. DC output
j. DC input k. USB3.0 output l. USB output
m. Type-c output n. 12V DC output l. 24V DC output
j k l mn o
g
hi
b c d e f
What’s In The Box
1x P66 Portable Power Station
1x AC charging Adapter
1x Car Charger Cable
1x MC4 Adapter
1x Warranty Card
1x User Guide
Shows the amount of power (watts) going into the P66
while charging.
01 02
W
AC OUTPUT
DC OUTPUT
BATTERY LEVEL
INPUT
Shows the amount of power(watts) your AC devices are
using while plugged into the P66
AC OUTPUT
Shows the amount of power(watts) your DC devices are
using while plugged into the P66
Shows 6 segments, approximating 10%-20%-40%
60%-80%-100% capacity.
When charging your P66 you will notice
a battery segment blinking, this indicates the current
charge status. Once fully charged, all battery segments
will be lit and remain solid.
DC OUTPUT
BATTERY
LEVEL

USB Power Button
DC Power Button
Main Power Button
Main Power Button
Main Power Button
USB OUTPUT
DC OUTPUT
Using Your P66
Notice:
Press the main power button，the power station will be turned on.
1. Press the main power button, and then press the “USB” power
button, USB output and Wireless charging will be turned on, the green
LED light on the button is illuminated.
2. Plug your devices into corresponding ports.
1. press the main power button, and then press the “DC” power
button, the DC output will be turned on, the green LED light on the
button is illuminated.
2. Plug your devices into corresponding ports, you will see the amount of
power(watts) your devices are using marks on the LED display
Please use this power station to power your device at temperatures
ranging from -10℃~45℃
Before using, please check whether the power of your device exceeds
the output range of this unit. This power station will enter protection
mode if the power of your device exceeds the output range
Press POWER and Press the DC/USB/AC/LED button to turn on
corresponding output port(when not using certain ports, make sure
to turn them off to conserve power)
You'll know the output port is turned on when the green LED light
on the button is illuminated
Press the "POWER" button to turn on/off the LED display
03 04
1.
2.
USB
DC
USB
AC Power Button
AC OUTPUT
1. press the main power button, and then press the “AC” power
button, the AC output will be turned on, the green LED light on the
button is illuminated.
2. Plug your devices into corresponding ports, you will see the amount
of power(watts) your devices are using marks on the LED displa

What it Powers Charging from Solar
Charging from AC Adapter
Charging Your P66
05 06
AC OUTPUT
DC OUTPUT
USB OUTPUT
As the ambient temperature and battery usage times change, the
using time of power station will change.
Place the solar panels in direct sunlight.
Please connect the DC output terminal of the solar panel to the
charging. port of the power station, and the LED display will show
the charging status. (Please charge at the temperature range of 0
°C ~ 40 °).
Remove the charging device from the solar panel and power
station after fully charged.
Insert the AC adapter into the socket, and then connect the other
end to the DC input charging port of the power station. The LED
display will show the charging status.
Remove the charging adapter from power station after fully
charged.
①
②
①
②
③
Please confirm the power of the device in the instruction manual or
catalog of the device.
When the charging specification of the device exceeds the maximum
value of this unit, this power station will enter automatic protection
mode,the output will be turned off automatically.Before using, please
ensure your electronic device is below 300W.
AC Wall Charger
Solar Panel
Car Charger
Input
Television Electric blanket Tablet
Mini Fridge LED light Fan
Phone USB fan GoPro
SunSolar panelP66
AC socket AC charging adapter P66

Charging from Car Charger(12V)
07 08
Connect the included car charging cable into car port.
Connect the other end of car charging cable into the charging port
of the power station, and the LED display will show the charging
status.
Remove the charging adapter from power station after fully
charged.
The power marquee will be 10%-20%-40%-60%-80%-100%,
displayed in 6 segments. When the battery capacity is below 10%,
the power marquee could not show the specific remaining amount
of capacity. At this time, please charge as soon as possible;
when the battery capacity is below 10%, the power marquee will
flash.
In addition, if you do not use it for a long time, please charge the
power supply every three months.
①
②
③
Car Car Charger Cable P66
The battery indicator shows the remaining battery capacity.
Charging Indication
Charge soon
60% 40% 10%20%
High Low
100% 80%
Capacity
3.2KG
Lithium-ion Battery
≥1000 times
5V~9V/2A ,18Wmax
Weight
Cell Type
Lifecycles
Input
2x USB Output
USB-AQC Port
USB-CQC Port
DC Output
Working
Temperature
Safety Protection
AC Output
Charge Temperature: 0℃-40℃
Discharge Temperature: -10℃-45℃
Overheating Protection,
Over Current Protection,
Over Voltage Protection,
Short Circuit Protection
Adapter:DC15V/3A
Solar Panel Charging: DC13V~22V/3A
5V~ 9V/2A, 18W Max
Technical Specifications
110V 60Hz / 300W
210×146×157mm(LWH)
299Wh/ 80818mAh, Lithium-ion
5V/2A
1x Cigarette Lighter Adapter
Size
1x 5521 DC Output:12V/10A
1x 5525 DC Output:24V/4A

Frequently Asked Questions
Why this power station cannot supply power to other devices
(no output)?
How to release the automatic protection function after it is
activated?
Why is the adapter hot while charging the power station?
What is overload protection?
Follow these steps
①
②
③
④
①
②
③
④
⑤
09 10
Please check whether the power button and output ports of
the power station are turned on (there’s no output if the
ambient temperature is beyond -10 °C to 45 °C).
Check if the device completely inserted into the output port
of power station; Whether there is foreign matter at the port
of device and power station.
Please refer to the marquee of the LED display to confirm the
remaining battery capacity of the power station. If it’s less
than 10%, the power station needs to be recharged.
Check if the voltage and current，power specifications of the
device exceed the range of power station.
Please confirm whether the power station is automatically
turned on over current/ overload/ over temperature function
due to other reasons.
AC output overload and short circuit
AC output will enter the protection state, please remove the
load of AC output, and restart to restore normal.
DC overload
DC output will enter the protection state, please remove the
load of DC output, and restart to restore normal;
USB output overload and short circuit
USB output will enter the protection state, please remove the
load of USB output, USB will automatically return to normal.
Wireless charging
When the temperature of the wireless transmitter reaches 50
degrees, it will automatically turn off the wireless charging
function. After the temperature drops, it will automatically
return to normal. Please place the mobile phone in the middle
of the wireless charging area.
Our accessories include a high temperature AC adapter. In
addition, the adapter is UL / PSE certified. Please feel free to use
it
"!"Troubleshooting
1) When the battery temperature reaches 70 degrees, "!" will
appear on the display, after the temperature dropping, restart to
restore normal.
2) When the DC output happens short-circuit issue, "!" will
appear on the display, and the DC output will be automatically
turned off. Please remove the abnormality and then restart to
restore normal.
Overload protection is that the power station will automatically
turn off when the power of the device exceeds the rated output
power. when the power system detects that the device being
used is shorted or overloaded. Related functions will be turned
off. Please confirm whether the device parameter specifications
meet the scope of the power station before using it.
How do i know if my device will work with the P66?
You will need to check the amount of power your device requires.
This may require some research on your end. An online search or
examining the user guide for your devices should suffice. To be
compatible with the P66 you should use devices that require less
than 300W.
How to know the working times for my device?
You will need to check the amount of power your device requires.
This may require some research on your end. An online search or
examining the user guide for your devices should suffice. To be
compatible with the P66 you should use devices that require less
than 300W.

11 12
SECURITY AND MAINTENANCE PRODUCT APPLICATION SKILLS
Battery information
Statement
"!"Troubleshooting
1) When the battery temperature reaches 70 degrees, "!" will
appear on the display, after the temperature dropping, restart to
restore normal.
2) When the DC output happens short-circuit issue, "!" will
appear on the display, and the DC output will be automatically
turned off. Please remove the abnormality and then restart to
restore normal.
a)
b)
c)
d)
e)
f)
a)
b)
c)
d)
e)
g)
h)
i)
j)
k)
l)
Do not short-circuit the unit. To avoid short-circuitng, keep the
unit away from all metal objects (e.g. coins, hair-pins, keys,
etc.).
Do not heat the unit, or dispose of it in fire, water or other
liquids. Keep away from high temperatures. Do not expose the
unit to direct sunlight.
Keep away from high humidity, dusty places.
Do not disassemble or reassemble this unit.
Do not drop, place heavy objects on, or allow strong impact to
this unit.
This appliance is not intended for use by persons (including
children) with reduced hysical, sensory or mental capabilites,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
Do not cover the device with towels, clothing and other item.
The unit may become hot when charging. This is normal. Use
caution when handling.
Use the unit properly to avoid electronic shock.
Please deal with scrap products in accordance with the
regulations, do not treatment the built-in battery as a
household garbage, so as not to cause the explosion and
pollution.
The product is only used for emergency power station, it can
not replace the standard DC or AC power of household
appliances or digital products.
This product is built in high quality original lithium ion battery,
it has no memory effect but high-capacity, and it is durable.
However, we still recommend you to apply in the range of 10
℃ ~30 ℃, so as to obtain the optimal charging capacity;
When charging, in order to avoid interference, please stay
away from TV, radio and other equipment
If the device has not been used for a long time, please
disconnect the cable and store it
Some portable devices may need to be set in charge mode to
charge, see the corresponding equipment use manual for
more information
In order to extend the life of product (lithium battery), is
better to charge within 3 months, and charge at least once
within 6 months.
Your device has and internal, non-removable, rechargeable
battery. Do not attempt to remove the battery, as you may
damage the device.
The battery can be charged and discharged over 1000 times, but
it will eventually wear out.
All rights reserved. Reproduction in whole or in part without
written permission is prohibited. All other trademarks are
trademarks of their respective owners. Features and specifica-
tions are subject to change without notice.
This manual is only used as guide unless otherwise agreed.All
the statement, information and suggestion in this manual ,do
not constititue as express or implied gurantee.

说明书
材质：128g纸质铜版纸
成品尺寸：88x140mm
装订方式：骑马钉
装钉成本后，排版按照的顺序：封面，封面内页，前言，
01、02、03、04……12、封底
注：红色字和线条不做印刷