Protech Systems MH-5100 User manual

Ver. Q1
All Rights Reserved. Copyright 2017
Packing Checklist
MH-5100
MH-5100 MH-5100
Specifications System View Unit: mm
Side View
Scan Button
Rear View
Front View
Power LED MSR Module
Camera
Battery Pack
Smart Card Reader
267.84
188.5
NFC Module
Scan Button
Power Button
USB Port
DC-IN
25.2
Bottom View
17.7
MSR Module Barcode Scanner
Earphone Jack
Top View
POGO Pins
System
CPU Type Intel®Bay Trail T/CR Z3735F Processor
Memory Support 1 x DDR3L on board, up to 2GB
O.S. Windows®10 IoT Enterprise LTSB 2016 OS (32 bits)
Speaker 1W Speaker x 1
Battery Pack Main battery (1S2P) & RTC battery
BIOS Insyde BIOS / SPI Flash ROM
Wi-Fi + Bluetooth module 802.11 a/b/g/n wireless LAN and Bluetooth 4.0 module
G-Sensor Accelerator sensor
IP Rating IP54
Dimension (LxWxT) 259.9 mm x 175.9 mm x 17.7mm
System Weight Less than 838g
Power Supply DC 12V/2A/24W
Display
LCD Panel 10.1” LED backlight LCD, LVDS interface
Touch Panel 10.1” PCT (Focal touch IC) / I2C interface
Max. Resolution 1280x1800 dots WXGA
Integrated Devices
Barcode Scanner Honeywell N3680 2D Barcode scanner
3G Module 3.75G supports SIM card interface
NFC Module NXP
Rear Camera 5M pixels camera module with autofocus function
MSR Module IDTECH
Smart Card Reader Module IDTECH
Storage (SDIO Interface)
Storage 32GB eMMC storage and MicroSD storage for external memory expansion
External I/O Ports
DC-IN Jack 1 x DC-IN Jack
Cradle Connector 1 x POGO pins (1x10 pins)
USB Standard USB (Type A) x1 for external expansion
SD (Secure Digital) MicroSD Slot for internal memory expansion
SIM Card Slot For cellular network services
Audio Jack Audio Jack x 1
Environment
Operating Temp. 0°C~ 40°C (32°F ~ 104°F)
Storage Temp. -20°C~ 60°C (-4°F~ 140°F)
Operating Humidity 0%~ 90% (no condensation)
MH-5100
Quick
Reference
Guide
If you discover any item below are damaged or
lost, please contact your vendor immediately.
MH-5100 Integrated Pad x1
This Quick Reference Guide x1
AC Power Adaptor x1
Manual/Driver DVD x1
Neck Strap x1
Hand Strap Set (2 x strap brackets,
2 x pan head screws (M3 x 6 mm), Velcro badge)
x1

Quick Setup
All Rights Reserved. Copyright 2017
Safety Precaution
Step 1. Use your left hand to
slide to unlock left-side
battery switch.
Step 2. Push sliding tab to
the right side
and long press
on it and hold it.
Step 3. Use a fingertip of your right hand
to remove the battery from the slim
opening.
Step 4. Replace a new battery onto back of
Pad and the right-side locking switch
snaps into place automatically.
Step 5. Slide the left-side battery
switch to the right to
secure and lock up the
replaced battery to
complete.
MH-5100
10.1” Integrated Pad Powered By Intel Bay Trail Platform with Intel Atom
TM
®®
4. Good Care
• When the outside of the case is stained, remove the stain with a neutral washing agent with a dry
cloth.
• Never use strong agents such as benzene and thinner to clean the system.
If heavy stains are present, moisten a cloth with diluted neutral washing agent or with alcohol and
then wipe thoroughly with a dry cloth.
• If dust has been accumulated on the outside, remove it by using a special made vacuum cleaner
for computers.
• Don’t contact the surface of capacitive touch before entering your operation system, or capacitive
touch may have position problems for electrostatics interface.
• Don't exchange the M/B battery by yourself or serious damage may incur.
The following messages are reminders for safety on how to protect your system from damages and to
extend a long life of the system.
1. Check the Cable Voltage
• Make sure the range of operating voltage between AC 100V ~ 240V. Otherwise, the system could
be damaged.
2. Environmental Conditions
• Place your MH-5100 on a sturdy, level surface. Be sure to allow enough space to have easy
access around the system.
• Avoid extremely hot or cold place to install the system.
• Avoid exposure to sunlight for a long period of time or in an airtight space.
• Avoid the system from any heating device or using it outdoors in a cold winter day.
• Bear in mind that the operating ambient temperature is from 0 ~ 40°C (32 ~ 104°F).
• Avoid moving the system rapidly from a hot place to a cold place and vice versa because
condensation may come from inside of the system.
• Don’t place the system close to any radio active device in case of signal interference.
3. Handling
• Avoid putting heavy objects on top of the system.
• Don’t allow foreign objects to fall into this product.
• If water or other liquid spills into this product, unplug the power cord immediately.
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
WARNING! Some internal parts of the system may have high electrical voltage. And therefore we strongly
recommend that qualified engineers can open and disassemble the system. The LCD and Touchscreen are
easily breakable, please handle them with extra care.

Ver. Q1
All Rights Reserved. Copyright 2017
Packing Checklist
MH-5100
MH-5100 MH-5100
Specifications System View Unit: mm
Rear View
Side View
Bottom View
LAN and Cash Drawer Selection
LAN
DWR
If you discover any item below are damaged or
lost, please contact your vendor immediately.
MH-5100 Lite Cradle x1
This Quick Reference Guide x1
MH-5100
Lite Cradle
Quick
Reference
Guide
AC Power Adaptor x1
AC Power Cord x1
Lite Cradle
Cradle Connector POGO pins (1 x 10 pins) (Interface: USB 2.0 / Power / Ground)
Kensington Security Lock slot Lock slot x 1
Lock Switch Lock switch x 1 used to fix Integrated Pad and Lite Cradle
AC Power Adapter 12V/5A/60W AC Power Adapter
Weight About 858g
Dimension 220mm x 217.23mm x 131.65mm
Rear I/O Ports
DC-IN Jack DC 12V IN (pin’s φ =2.5mm) x 1
USB Ports USB1/USB2: Dual standard Type A USB 2.0 ports
Serial Ports COM1: RJ-45 with 12V/5V/RI x 1
COM2: D-Sub 9 with 12V/5V/RI x 1
LAN Port or LAN1: 10/100 Mbps, RJ-45 x 1
Cash Drawer Port DRW1: RJ-11 with 12V/1A x 1
Environment
Operating Temp. 0°C~ 40°C (32°F ~ 104°F)
Storage Temp. -20°C~ 60°C (-4°F~ 140°F)
Operating Humidity 0% ~ 90% (no condensation)
Top View
Front View
Lock Switch
220
98.22
Kensington
Lock Slot
217.23
131.65
Rear I/O Ports
LAN COM2USBDWRCOM1
IN 12V
DC-IN COM1
Cash
Drawer LAN COM2
2 x
USB 2.0
DIP
Switch

Jumper Settings
All Rights Reserved. Copyright 2017
Safety Precaution
MH-5100
10.1” Integrated Pad Powered By Intel Bay Trail Platform with Intel Atom
TM
®®
COM2 Pin9 RI/5V/12V
5V
1
2
2
5
6
(default)
RI
5
6
1
2
12V
1
2
5
6
COM1 Pin9 RI/5V/12V
5V
1
2
2
5
6
(default)
RI
5
6
1
2
12V
1
2
5
6
U9
U5
U12
U6
L2
U16
U1
16
64
1
32
1
48
15 14
8
7
21
28
22
1
48 1
36
12
24
22 12
111
28
1
9
14
15
25
1
2
JP1
L5
ESD4
U13
Q36
JP2
U8
Y3
ESD3
EEPROM_CN1
ESD5
CP5
U17
JP3
Q1
CP6
Y1
U7
9
5
1
4
5
3
1
42
3
8
1
3
1
8
2
4
6
1
15
14
2
1
3
4
6
28
1
1
I
1
12
11
2
1
1
4
8
2
3
43
14
13
10
9
12
2
4
33
1
1
1
6
9
10
2
43
12
5
10
1
2
15
6
10
G
O
14
DC_IN1 COM1 DRW1 LAN1 USB1 COM2
JP_COM2
JP_COM1
5
61
2
6
5
4. Good Care
• When the outside of the case is stained, remove the stain with a neutral washing agent with a dry
cloth.
• Never use strong agents such as benzene and thinner to clean the system.
If heavy stains are present, moisten a cloth with diluted neutral washing agent or with alcohol and
then wipe thoroughly with a dry cloth.
• If dust has been accumulated on the outside, remove it by using a special made vacuum cleaner
for computers.
• Don’t contact the surface of capacitive touch before entering your operation system, or capacitive
touch may have position problems for electrostatics interface.
• Don't exchange the M/B battery by yourself or serious damage may incur.
The following messages are reminders for safety on how to protect your system from damages and to
extend a long life of the system.
1. Check the Cable Voltage
• Make sure the range of operating voltage between AC 100V ~ 240V. Otherwise, the system could
be damaged.
2. Environmental Conditions
• Place your MH-5100 on a sturdy, level surface. Be sure to allow enough space to have easy
access around the system.
• Avoid extremely hot or cold place to install the system.
• Avoid exposure to sunlight for a long period of time or in an airtight space.
• Avoid the system from any heating device or using it outdoors in a cold winter day.
• Bear in mind that the operating ambient temperature is from 0 ~ 35°C (32 ~ 104°F).
• Avoid moving the system rapidly from a hot place to a cold place and vice versa because
condensation may come from inside of the system.
• Don’t place the system close to any radio active device in case of signal interference.
3. Handling
• Avoid putting heavy objects on top of the system.
• Don’t allow foreign objects to fall into this product.
• If water or other liquid spills into this product, unplug the power cord immediately.
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
WARNING! Some internal parts of the system may have high electrical voltage. And therefore we strongly
recommend that qualified engineers can open and disassemble the system. The LCD and Touchscreen are
easily breakable, please handle them with extra care.