Pulsar W170 User manual

CAL. W170
DIGITAL QUARTZ
ENGLISH
●Time/calendar
●100-hour stopwatch
●Countdown timer
●Regular alarm
●Dual time
●Illuminating light (electroluminescent panel)

2
English
MODE CHANGE
AWith each press, the mode changes in the following order:
TIMER
➡➡
DUAL
TIME
STOPWATCH
TIME/
CALENDAR
➡➡
➡
* The design of the liquid crystal panel differs depending on the model.
A
ALARM

3
English
TIME/CALENDAR MODE
TIME/CALENDAR SETTING
APress to show TIME/
CALENDAR mode.
B
▲
Press for 2 seconds.
▲
C
▲
Select the digits to be
adjusted.✽
D
▲
Set the flashing digits.
▲
BReturn to TIME/CALENDAR
mode.
A
BC
D
Day Date

4
English
✽Selection of the digits
Seconds ➾Minutes ➾ Hour ➾ Year ➾Month ➾Date
➾
12-/24-hour indication
➾
SHOWING THE CALENDAR DISPLAY
CPress and hold in TIME/
CALENDAR mode.
* While the button is kept pressed,
the year, month and date are
displayed.
C
Year
Date
Month

5
English
STOPWATCH MODE
●The stopwatch measures up to 100 hours in 1/100 second increments for the first
hour and in 1 second increments thereafter.
D
CStart / Stop / Restart
APress to show STOPWATCH mode.
Measure split time /
Reset
A

6
English
Split time measurement
START
▲
SPLIT 1
▲
SPLIT 2
▲
• • • •
STOP
▲
RESET
CD C D
D
Measurement of two competitors
START RESET
CD
D
FINISH TIME OF
1ST COMPETITOR
(displayed in the upper row)
▲
C
FINISH TIME OF
2ND COMPETITOR
(displayed in the lower row)
▲
▲

7
English
TIMER MODE
●The timer can be set up to 99 hours and 59 minutes in minute increments.
●After the set time is up, the timer counts up the time up to 59 minutes and 59
seconds.
●The remaining time is displayed in seconds.
TIMER SETTING
APress to show TIMER mode.
BPress for 2 seconds.
C
▲
Select the digits to be adjusted
(hour/minutes).
D
▲
Set the flashing digits.
▲
▲
BReturn to TIMER mode.
A D
BC
Current time
Set time

8
English
TIMER OPERATION
CStart / Stop / Restart
* When the set time is up, a warning sound beeps for 20 seconds.
To stop it manually, press any of the buttons.
Set time
Current time
DReset

9
English
ALARM MODE
●The alarm can be set to ring on a 24-hour basis.
APress to show ALARM mode.
ALARM TIME SETTING BPress for 2 seconds.
C
▲
Select the digits to be adjusted
(hour/minutes).
▲
▲
BC
AD
Current time
Set alarm time
DSet the flashing digits.
▲
BReturn to ALARM mode.
* The alarm mark is automatically
displayed and the alarm is
engaged.

10
English
ENGAGEMENT/DISENGAGEMENT OF ALARM
AND HOURLY TIME SIGNAL
With each press, the engagement/
disengagement of the alarm and hourly
time signal are made as follows:
Alarm engaged
Hourly time signal engaged
Both engaged
Neither engaged
C
Alarm mark
* At the designated time, the alarm rings for 20 seconds. To stop it manually, press any
of the buttons.
* Checking the set alarm time:
Press and hold button D in the TIME/CALENDAR mode. While the button is kept
pressed, the alarm time that has been set is displayed. When the alarm is disengaged,
the set alarm time will not be displayed.
▲
▲
▲
▲
C
Hourly time
signal mark