Pulsar W522 User manual

CAL. W522
DIGITAL QUARTZ
●Dot-matrix liquid crystal panel
●Time/calendar
●8-channel memo function
●World time
●Regular alarm and single-time alarm
●Illuminating light (electroluminescent panel)

2
MODE CHANGE
AWith each press, the mode changes in the following order:
WORLD TIME
➡
MEMO
TIME/
CALENDAR
➡
A
➡➡
REGULAR
ALARM
CPress in TIME/CALENDAR mode to show SINGLE-TIME ALARM
mode.
C

3
TIME/CALENDAR MODE
●Once the time/calendar of your area is set in the TIME/CALENDAR mode, the
times of the 24 cities covered in the WORLD TIME mode will be set automatically.
EF
Time
Date
AD
Day
* To display the times of the cities covered in the WORLD TIME mode properly, it is
necessary to select the city representing your area and set the correct time in the
TIME/CALENDAR mode.
●The contrast on the liquid crystal display can be adjusted in 16 steps.
C
Press to show TIME/CALENDAR mode.
A
Month

4
TIME/CALENDAR SETTING
A
▲
▲
Press to select the digits to be adjusted.
Selection of the digits
▲
Set the flashing digits. (Increasing digits)
Set the flashing digits. (Decreasing digits)
C
D
or
▲
AReturn to TIME/CALENDAR mode.
Press for 2 to 3 seconds to show TIME/CALENDAR SETTING
display.
Eor F
Seconds
↔
Minutes Hour Year Month
DateDayCity
Contrast
level
12-/24-hour
indication
↔
↔
↔
↔
↔
↔
↔
↔
↔

5
CHANGEOVER BETWEEN TWO TIME DISPLAY SYSTEMS
➡
➡
DEMONSTRATION FUNCTION
DPress in TIME/CALENDAR mode to start the demonstration.
* The watch shows the displays in each mode.
* To stop the demonstration, press button A, C, D, E or F.
F E
With each press in TIME/CALENDAR mode, the time
indication in the lower row of the display changes
alternately between “HOUR, MINUTES and SECONDS”
and “HOUR and MINUTES”.
Eor F

6
MEMO MODE
●A memo of up to 40 characters can be stored in each of the 8 memo channels.
A
A
C
D
E
F
Memo
Memo channel No.
Press to select the desired memo channel.
Cor D
Press to show MEMO mode.

7
SCROLL DISPLAY OF MEMOS
●If the memo stored in a memo channel has more than 6 characters, the
display scrolls to show the rest of the characters.
●The display scrolls to show 5 characters at a time. The scrolling display
can be stopped or moved back as desired.
Press to select the desired memo channel.
Cor D
▲
With each press, the next 5 characters are shown.
With each press, the previous 5 characters are shown.
F
E
or
* After the last characters are shown, the first 5 characters will appear again.
* As the first 5 characters are shown by pressing button E repeatedly, button E
will no longer work.

8
HOW TO INPUT THE MEMO
With each press, the flashing character changes in order.
C
D
or
EWhen the desired character is shown, press to register it.
Press to select the desired memo channel.
Cor D
▲
AReturn to MEMO mode.
* The flashing position moves rightward for the input of the next character.
With each press, the flashing character changes in reverse order.
F
or
▲
When the desired character is shown, press to register it.
* The flashing position moves leftward.
▲
Press for 2 to 3 seconds to show MEMO INPUT display.
A
▲
▲

9
* To correct the characters already registered, press button E or F to move the flashing
position so that the character you wish to correct flashes. Then, press button C or D
to show the desired character, and press button E or F to register it.
HOW TO ERASE A MEMO
Press to select the desired memo channel.
Cor D
▲
Press for 2 to 3 seconds to show MEMO INPUT display.
A
▲
Press at the same time for 2 to 3 seconds.
Cand D
➡
C
D

10
WORLD TIME MODE
Press to show WORLD TIME mode.
A
A
C
D
E
F
●The time of 24 cities in different time zones throughout the world can be displayed.
●Daylight saving time can be set for each city.
Current time of
selected city
City mark
Eor Press to select the desired city. F