Pyle PDWM2550 User manual

(1) Charging indicator. The indicator lights
when the unit is charging the microphones.
The light will turn off when charging is
complete.
(2), (4) LCD: When the power is on, it will
show the FREQ (frequency), RF (signal
strength indicator), and microphone sound
waves.
(3) Channel A volume control.
(5) Channel B volume control.
(6) Power switch.

1. Open the battery housing by twisting it
counterclockwise.
2. Insert the battery; make sure the +/- polarity is
correct.
3. Fit the battery compartment back on in the
clockwise direction.
4. Set the microphone switch to the first click. The
white LED indicator should light. Set the switch to the
second click.
5. Set the switch to OFF and remove the battery when
the microphone will not be used for a long time.
6. If the LED indicator does not light when switched to
the first click, please recharge the battery.