Pyle PDWM2145 User manual

Thank you forpurchasing this wirelessmicrophone system. This microphone system operates
on high-efficiency, low-consumption dischargingtechniques. Performance features include
independent developed mobilefrequency compression, expander circuitry, image frequency
limiting circuits, multiple-checkedsilent and noise-free circuits , antennadiversity receiving
circuit & switchimpact noise defeatcircuits.
The PDWM2135/2140/2145 were manufactured to be easy to use andstill give youprofessional
performance quality.
Simple Installation andOperation:
*Please note - selectmodels come equipped withdifferent transmitters and microphones
·Unscrew the bottomof the microphone(or slide open thebattery compartment tray of the
belt-pack transmitter) toinstall two 'AA'Batteries. Screw theBattery cap backon.
·Plug your receivingunit into yourmixer or amplifierwith a 1/4" mono microphone cord.
·Plug the receiving unitinto your electricalwall outlet.
·Turn thereceiver on byusing the on/offswitch located at the frontof the unit.
·There is aswitch located on each of thetwo microphones thatturns each microphoneon/off
& mutes them individually.
PDWM2135
VHF Narrow Band Receiver System
Dual Frequency Design (Channel A/B)
High Signal/Noise Ratio Performance
Broad Frequency Response Range &Low
Distortion
Independent Adjustable Volume Control
Dual Independent Channel Antennas
RF Signal and AF Signal LED Indicators
Radio Frequency and Audio Frequency
Includes (2) Handheld Microphones
System Receiver:
Channel Frequency: 174~216MHz
Sensitivity: -95dBm (S/N:12dB)
RF Image Rejection:-75dB
Audio Dynamic Range: 95dB
T.H.D.: <1%
Frequency Stability: 0.002%
S/N Ratio: >70dB
Neighboring Channel / Interference: >70dB
Frequency Response: 50Hz~15KHz 3dB
Power: AC 120V, 60Hz
Receiver Dimensions (L x W x H):
8.07'' x 5.75'' x 1.64''
Microphones:
Carrier Frequency:174~216MHz
RF Power Output: >13dBm
Modulation Degree: >30KHz
Power Current: <110mA
Frequency Stability: 0.002%
Harmonic at Higher Degree: <60dB
Modulation Pattern: FM
Battery Powered:
Requires 2 x 'AA' Batteries
PDWM2140
VHF Narrow Band Receiver System
Dual Frequency Design (Channel A/B)
High Signal/Noise Ratio Performance
Broad Frequency Response Range & Low
Distortion
Independent Adjustable Volume Control
Dual Independent Channel Antennas
RF Signal and AF Signal LED Indicators
Radio Frequency and Audio Frequency
Includes Handheld Microphone, Body-Pack
Transmitter, Lavalier & Headset Mics
System Receiver:
Channel Frequency: 174~216MHz
Sensitivity: -95dBm (S/N:12dB)
RF Image Rejection:-75dB
Audio Dynamic Range: 95dB
T.H.D.: <1%
Frequency Stability: 0.002%
S/N Ratio: >70dB
Neighboring Channel / Interference: >70dB
Frequency Response: 50Hz~15KHz 3dB
Power: AC 120V,60Hz
Receiver Dimensions (L x W x H):
8.07'' x 5.75'' x 1.64''
Transmitters:
Carrier Frequency:174~216MHz
RF Power Output: >13dBm
Modulation Degree: >30KHz
Power Current: <110mA
Frequency Stability: 0.002%
Harmonic at Higher Degree: <60dB
Modulation Pattern: FM
Battery Powered:
Requires 2 x 'AA' Batteries
PDWM2145
VHF Narrow Band Receiver System
Dual Frequency Design (Channel A/B)
High Signal/Noise Ratio Performance
Broad Frequency Response Range & Low
Distortion
Independent Adjustable Volume Control
Dual Independent Channel Antennas
RF Signal and AF Signal LED Indicators
Radio Frequency and Audio Frequency
Includes (2) Body-Pack Transmitter,
(2) Lavalier & (2) Headset Mics
System Receiver:
Channel Frequency: 174~216MHz
Sensitivity: -95dBm (S/N:12dB)
RF Image Rejection:-75dB
Audio Dynamic Range: 95dB
T.H.D.: <1%
Frequency Stability: 0.002%
S/N Ratio: >70dB
Neighboring Channel / Interference: >70dB
Frequency Response: 50Hz~15KHz 3dB
Power: AC 120V,60Hz
Receiver Dimensions (L x W x H):
8.07'' x 5.75'' x 1.64''
Transmitters:
Carrier Frequency:174~216MHz
RF Power Output: >13dBm
Modulation Degree: >30KHz
Power Current: <110mA
Frequency Stability: 0.002%
Harmonic at Higher Degree: <60dB
Modulation Pattern: FM
Battery Powered:
Requires 2 x 'AA' Batteries