Pylontech FORCE H Series User manual

Technical Training Course
Force –H series
May 2020

Product Introduction
01
02 Configuration
C O N T E N T
03 Installation
04 Power on/off
05 Trouble-shooting
06 Replacement

Product Introduction
01

Product Parameter and Features
•Modular design, flexible on expansion
•0.5C continuous running, 40Amps max.
•Intelligent communication
•Long life cycle, 10yrs standard warranty
•Most rigorous safety test
•Capacity choice from 7.10 –24.86kWh
Force H1 - typical RESS & light commercial
Force H2 - 3-Phase small RESS
•35kG per module, light on weight
stackable mounting, installation cost save
•Available for outdoor installation

Application & Configuration
02

Back Up Residential Commercial
Application

•Back-up
•Peak Shaving
Inverter
Hybrid
•PV ESS
Residential

Configuration
Quotation Item:
1. Battery Module(FH48074/FH9637M) –varying amount depends on application.
2. BMS(FC0500-40S/FC0500M-40S) –1pcs per system, include external cables.
Item Amount Min.
Voltage(Vdc)
Max.
Voltage(Vdc）
Nominal
Capacity(kWh)
Usable
Capacity(kWh)
Rated
Power(kW)(1)
Peak Power
(kW, 15S)(1)
Min. Back-up
time(2)
Force - H1
3130.5 162 10.7 9.6 5.3 5.8 1.8hrs
4174 216 14.2 12.8 7.1 7.7 1.8hrs
5217.5 270 17.8 16.0 8.9 9.6 1.8hrs
6261 324 21.3 19.2 10.7 11.5 1.8hrs
7 304.5 378 24.9 22.4 12.4 13.4 1.8hrs
Force - H2
2174 216 7.1 6.4 3.6 7.7 1.8hrs
3261 324 10.7 9.6 5.3 11.5 1.8hrs
4348 432 14.2 12.8 7.1 15.4 1.8hrs
(1)Rated/Peak Power is base on ideal operation temperature(10
-40℃)，during charging the power will leveling decrease when reaching full capacity.
(2) Min. Back
-up time is base on rated power and related condition during beginning of life, in real application please consider the load.

Installation
03

Installation Checking List
1) For battery module package:
1*battery module.

2) For BMS package:
1*BMS, 2*long metal bracket, 2*short metal bracket, 1*base, 2*power cable(3.5M),
2*communication cable(3.5M), 1*grounding cable(2M), screws, manual and warranty card.
Installation Checking List

BEFORE YOU START
•Installation Manual
•Location & Environment
•Tools & Accessories
•Compatible Inverter

INSTALLATION
1) Installation of the base:
>300mm above ground, support of 130 ~ 300kG, fixed with 4*M8*80 foundation bolts.

INSTALLATION
2) Mounting battery module and BMS:
Handle the red marked edgings of the both side of these battery modules and control module (BMS).
Do not touch the connector on front.
Handle from here
DON`T touch here

INSTALLATION
3) Fix the metal bracket:
Long bracket –for connecting max. 4 modules; Short bracket –for connecting max. 3 modules.
Bracket can be overlap together; Make sure the bracket is fixed from the base with screws.

INSTALLATION
4) Lock the BMS with screws:

INSTALLATION
5) Grounding cable connection:
Grounding cable must ≥10AWG; Resistance must be less than 100mΩ.

INSTALLATION
6) Connection Panel Interface:

INSTALLATION
7) Communication cable connection:

INSTALLATION
8) Power cable connection: