Qvis Pioneer Quattro User manual

BEFORE INSTALLING ANYTHING WE STRONGLY RECOMMEND THAT YOU CONNECT YOUR CAMERAS TO YOUR RECORDER AND TEST
YOUR SYSTEM FIRST. WE CHECK EVERYTHING TO MAKE SURE IT IS WORKING WHEN IT LEAVES US, BUT IT MAY BECOME DAMAGED
DURING TRANSIT, SO IT IS BETTER TO KNOW NOW THAN AFTER YOU HAVE FITTED EVERYTHING!
1. DEVICE CONNECTIONS
PIONEER QUATTRO NVR
QUICK CONNECTION SETUP GUIDE
Hello & Welcome, this guide is the rst thing you need to read to set up your CCTV system. Lets get started!
Before you
start, please
check that
you have the
following
items:
What’s included in the kit box:
Cameras & Power
Supplies
Recorder Ethernet Cable Power Supply Resource Disc User Manual
What you will need:
Monitor
Mouse Router
Recorder’s Power
Adapter
Kit’s Recorder
1. 3.2.
.
.
Camera Connections
Connect camera’s
video cable to video
extension cable.
Recorder Connections
(Please turn over for more information)
Complete Connection
setup
Connect peripheral
devices to the DVR and
provide power
Camera Video Cable Connection
Connect the
mouse to the
USB socket
Output to TV
or Monitor
HDMI/VGA
Video Extension
Cable
Mains Power
Supply
The installation of your system
should be fairly simple, however
if you are struggling or need
assistance to complete the set
up, please contact our Technical
Support team for help. Please
turn over to find out how to
reach us.
Mains Power
Supply
Power Cable Connection
Camera’s Power
Adapter
Connect extension cable’s
connector to one of the Video
In ports on the rear of recorder. 4.
Power to Camera
Connect camera’s power
adaptor in to the camera’s
power connector and plug
into mains power supply..
®

2. RECORDER’S REAR PANEL CONNECTIONS
3. CONNECTING TO THE INTERNET
Before continuing - please make sure that your recorder is setup as shown in parts 1 & 2 of this guide
SUCCESS! You
have now fully
connected up
you Qvis CCTV
system.
Recorder Modem/Router
Connect the Ethernet cable into the ‘Network’ port on the rear of the recorder, then connect the other end into one of the spare ports on
your modem-router, as shown below. This will mean you can set up remote viewing via our app.
More detailed instructions on how to operate your
DVR are included in the Main User Manual, which is
on the CD-ROM disc included.
We refrain from printing these large manuals in an
effort to limit our impact on the environment.
STILL NEED HELP?
Then speak to our engaging technical team via our
webchat service found upon our website:
www.qvisglobal.com
Look for this webchat
bubble on our website
to connect to one of
our technical team
members.
© Copyright QVIS ®. All documentation rights reserved. QUATTRO-CONNECTION
Before continuing - please make sure you have read and have completed the connection setup shown in part 1 to this guide
1
2
3
4
5 6
7
1
2
3
4
5
6
9
8
7
Audio Inputs - RCA (not available on 4/8 channel devices)
Alarm Inputs (not available on 4/8 channel devices)
Camera inputs - BNC
VGA - Display to monitor output
HDMI - Display to monitor output
2 x USB ports (mouse or backup)
Network port (Internet)
RS485 - PTZ camera inputs
Ethernet Cable
8
9
10
11
Audio Inputs - RCA
Audio output - RCA
DC 12Volt power supply port
10
11