Ranger design 5044 User manual

INSTALLATION GUIDE
5044 Raised Base for 5045 Cab Box
Sprinter

QUICK START GUIDE
REQUIRED ITEMS
1
PERSON
q1.1 Setup...................................................................................................................................................................................................... 3
Phase 1 - Assembly
Phase 2 - Installation
qCordless Impact
q3/8” Hex Socket Bit
q7/16” Hex Socket Bit
q2.1 Assembly With 5045 Cab Box.......................................................................................................................................................
q2.2 Install In Van........................................................................................................................................................................................
4
5

For technical support, contact us at 1-800-565-5321 5044 Installation Guide |REV.B2 | Page 3
54-6080
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Unpack all the components and compare with the bill of materials.
1.1.2 Verify all parts are present.
Item No. Description Qty.
54-6080 Raised Base, Cab Box, Sprinter 1
90-5020 Install Fastener Kit 1
BILL OF MATERIALS
90-5020 Fastener Kit Fastener Install
1.1.3 Fastener kits.
5×5×
#92-104 Screw #14 × 1-1/4"
# 92-104
Screw HWH
#14 × 1-1/4"
ZINC
5×5×
#90-108 Hex Bolt 1/4”-20 × 5/8"
#98-112 Flat Washer
#94-112 Serrated Nut
4×4×
# 94-112
Serrated Nut
1/4"-20
ZINC
4×4×
Hex Bolt
1/4"-20 × 5/8"
ZINC
# 90-108
4×4×
# 98-112
Flat Washer
1/4", 3/4" OD
ZINC
9×9×

For technical support, contact us at 1-800-565-5321 5044 Installation Guide |REV.B2 | Page 4
2.1 Place and attach the 5045 Cab Box on the raiser.
NOTE: 5045 Cab Box is a separate unit.
PHASE 2 – ASSEMBLY
2.1 ASSEMBLE WITH 5045 CAB BOX
TOOLS
qCordless Impact
q7/16” Socket
5044
#90-108 Hex Bolt 1/4”-20 × 5/8"
#98-112 Flat Washer
#94-112 Serrated Nut
4×4×
54-0680

For technical support, contact us at 1-800-565-5321 5044 Installation Guide |REV.B2 | Page 5
PHASE 2 – INSTALLATION
2.2 INSTALLATION
2.2 • Place the cab box raiser between the front seats.
• Adjust the position forward or backward to avoid any seat armrests or mechanical handbrakes levers.
WARNING: Verify with the vehicle manufacturer before drilling through the oor that no wires, cables
or other items are underneath. Adjust the position of the cab box raiser to avoid any items underneath.
• Use the 5 self-drilling screws to secure the cab box raiser to the oor.
TOOLS
qCordless drill
q3/8” Driver Bit
HARDWARE USED
5×
⚠
#92-104 Screw #14 × 1-1/4"

For technical support, contact us at 1-800-565-5321 5044 Installation Guide |REV.B2 | Page 6
You have successfully installed your
5044 Raised Base.
Thank you for doing business with us.
For any feedback or suggestions you may have, please contact: [e-mail]