Ranger design 16-UCT66 User manual

INSTALLATION GUIDE
16-UCT66 SINGLE CROSSBAR 66" NO FEET
For 1630-TCX and 1630-PCX
66"

For technical support, contact us at 1-800-565-5321 16-UCT66 Installation Guide |REV. A1 | Page 2
Item No. Description Qty.
16-004 Crossbar 66" 1
16-012 Crossbar-To-ski mounT 2
94-1603 CusTomer assembly FasTener kiT 1
BILL OF MATERIALS
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Verify all parts are present.
QUICK START GUIDE
q1.1.1 SeTuP ( VeriFy all ParTs are PresenT )...............................................................................................
q1.2.1 assembly..........................................................................................................................................
Phase 1 - Assembly
2
3 To 4
16-012 16-012
16-004
8×8×
Hex Bolt
5/16" - 18 × 3/4"
SS304
# 90-998
# 98-123
Lock Washer
5/16"
SS304
4×4×
# 94-105
Hex Nut
5/16"
SS316 waX
4×4×
# 90-491
4×4×
Carriage Bolt
5/16"-18 × 1"
SS304
# 98-117
Flat Washer
5/16" OD, 3/4"
SS18-8
4×4×
Fastener Assembly
94-1603
#90-998 Hex Bolt 3/4"
8×
#98-123 Lock Washer 5/16"
#98-117 Flat Washer 5/16"
#94-105 Hex Nut 5/16"
#90-491 Carriage Bolt 1"
4×

For technical support, contact us at 1-800-565-5321 16-UCT66 Installation Guide |REV. A1 | Page 3
1.2.2 Attach the crossbar-to-ski mount to the crossbar.
PHASE 1 – ASSEMBLY
1.2 PREPARATION
NOTE: Attach the front ladder hook,
rung stopper and ladder holder
to the crossbar before attaching
the crossbar-to-ski mount.
TOOLS
qCordless Impact
q1/2" Socket
#90-998 Hex Bolt 3/4"
FASTENERS USED
8×
2 - 3/4"
RUNG STOPPER
LADDER HOLDER
FRONT LADDER HOOK
NOTE: Slide the carriage bolts into the ski before
connecting both skis.
NOTE: Crossbar, feet, ski, ladder holder, rung stopper and hooks are not included in this kit.
CROSSBAR-TO-SKI MOUNT

For technical support, contact us at 1-800-565-5321 16-UCT66 Installation Guide |REV. A1 | Page 4
1.2.2 Position the 16-UCT60 single crossbar no feet as indicated in the image below.
77" ( Crossbar CenTer To CenTer )
16-UCT66
single Crossbar 66"no FeeT
“Thank you for doing business with us.”
For any feedback or suggestions you might have, please contact: [e-mail]