Raven Case IH SmartTrax SPX 3230 User manual

Case IH SPX 3230, 3320, and 3330
SmartTrax™ Installation Manual
P/N 016-5032-081 Rev A 06/15 E22879
Copyright 2014

While every effort has been made to ensure the accuracy of this document,
Raven Industries assumes no responsibility for omissions and errors. Nor is any
liability assumed for damages resulting from the use of information contained
herein.
Raven Industries shall not be responsible or liable for incidental or consequential
damages or a loss of anticipated benefits or profits, work stoppage or loss, or
impairment of data arising out of the use, or inability to use, this system or any of
its components. Raven Industries shall not be held responsible for any
modifications or repairs made outside our facilities, nor damages resulting from
inadequate maintenance of this system.
As with all wireless and satellite signals, several factors may affect the availability
and accuracy of wireless and satellite navigation and correction services (e.g.
GPS, GNSS, SBAS, etc.). Therefore, Raven Industries cannot guarantee the
accuracy, integrity, continuity, or availability of these services and cannot
guarantee the ability to use Raven systems, or products used as components of
systems, which rely upon the reception of these signals or availability of these
services. Raven Industries accepts no responsibility for the use of any of these
signals or services for other than the stated purpose.
Disclaimer
©Raven Industries, Inc. 2014

Table of Contents
Manual No. 016-5032-081 Rev. A i
Chapter 1 Important Safety Information................................................. 1
Hydraulic Safety ........................................................................................................................2
Electrical Safety ........................................................................................................................2
Chapter 2 Introduction............................................................................. 3
Preparing for Installation ...........................................................................................................3
Recommendations ..............................................................................................................4
Point of Reference ...............................................................................................................4
Kit Contents ............................................................................................................................... 5
Chapter 3 Hydraulic System Installation................................................ 9
Install Fittings on the SmarTrax Valve .....................................................................................10
Install Fittings on the Flow Switch ...........................................................................................11
Mount the SmarTrax Valve ...................................................................................................... 11
Install the Pressure Hose ........................................................................................................12
Install the Tank Hose ...............................................................................................................13
Install the Left and Right Steering Hoses ................................................................................14
Hydraulic System Diagram ......................................................................................................16
Chapter 4 Cab Component Installation................................................ 17
Install the SmarTrax Node .......................................................................................................17
Mount the SmarTrax Node ................................................................................................17
Node Mounting Locations ..................................................................................................19
Install the Node Harness .........................................................................................................19
Install the Valve Harness .........................................................................................................21
Install the Foot Switch .............................................................................................................22
System Diagrams ....................................................................................................................23
Node Wiring Diagram ........................................................................................................23
Chapter 5 Startup Procedures .............................................................. 27
Remove Air from the Hydraulic System ..................................................................................27
Verify the Hydraulic System Installation ..................................................................................28
Calibrate the SmarTrax System ..............................................................................................28

Table of Contents
ii Case IH SPX 3230, 3320, and 3330 SmarTrax™ Installation Manual

CHAPTER
1
Manual No. 016-5032-081 Rev. A 1
C hapt er 1 Important Safety
Information
Read this manual and the operation and safety instructions included with your implement and/or controller
carefully before installing the SmarTrax™ system.
•Follow all safety information presented within this manual.
•If you require assistance with any portion of the installation or service of your Raven equipment, contact
your local Raven dealer for support.
•Follow all safety labels affixed to the SmarTrax system components. Be sure to keep safety labels in good
condition and replace any missing or damaged labels. To obtain replacements for missing or damaged
safety labels, contact your local Raven dealer.
When operating the machine after installing SmarTrax, observe the following safety measures:
•Be alert and aware of surroundings.
•Do not operate SmarTrax or any agricultural equipment while under the influence of alcohol or an illegal
substance.
•Remain in the operator’s position in the machine at all times when SmarTrax is engaged.
•Disable SmarTrax when exiting the operator’s seat and machine.
•Do not drive the machine with SmarTrax enabled on any public road.
•Determine and remain a safe working distance from other individuals. The operator is responsible for
disabling SmarTrax when the safe working distance has diminished.
•Ensure SmarTrax is disabled prior to starting any maintenance work on SmarTrax or the machine.
•When starting the machine for the first time after installing SmarTrax, be sure that all persons stand clear in
case a hose has not been properly tightened.
•The machine must remain stationary and switched off during SmarTrax installation or maintenance.
NOTICE
WARNING