RCA IP060 User manual

•From base : make a long press on key until led is flashing in blue.
•From handset : press .
•Select base on which you want to register the handset and press .
•If requested, enter base code (0000 by default) and press otherwise handset will
register automatically to the base.
Battery charge level : ok
Batteries need charging
Left soft key :
access to call list
Right soft key :
access to calendar
Navigation key :
main menu/OK key
Left:
phonebook
End call
Power on/off
Accept calls
Handsfree mode
Voicemail key
Hash key :
change input
method
(upper/lower case)
Star key :
lock/unlock
keypad
(long press)
Mute key :
mute/unmute
Right:
volume control
Up:
redial
Down:
Intercom
BLF key
Voicemail
Headset modeHandsfree activated
Mute
Missed calls
Display icon description
Do not disturb
Alarm onKeypad lock
Good reception
quality
Bad reception
quality
Ringer off
Call in progress
(green)
Call on hold (red)
Call ended (red)
Handset registration
Quick start guide
Select line
Call forward
IP060
302

•Press to open main menu. Select Settings Language.
•Select the desired language and press .
Language selection
•Press .
•Highlight a record.
•Press to make the call, you may select the line by long pressing .
Redial
•Press Select Services DND.
•Select the line for which you want to set DND feature.
•Select Activate and press .
Do not Disturb
•Press to access voicemail.
Voicemail
Access phonebook :
•Press .
•Select the Directory type.
•Select a contact and press Options soft key to select an operation.
Add new entry :
•Press .
•Select the Directory type.
•Press Options soft key and select Add.
•Enter first name, last name and numbers.
Note: you may be asked to select the line to use for the second call.
Phonebook
•Pre-dialing : enter the phone number and press .
•Direct dialing : press . Enter the phone number.
•Handsfree : enter the phone number and press twice.
•Headset : connect the headset to the phone, enter phone number and press .
Note : to place a call from a specific line, make a long press on and use navigator
to select the desired line and press .
Making a call
•Press and select the desired handset from the list and press key to launch
the call.
Intercom
•Handset mode: press .
•Headset mode: press .
•Handsfree mode: press twice.
Accepting a call
•Select Hold with navigator and press .
•To retrieve the call, select Unhold with navigator and press .
Putting a call on hold
•
•
Once in line with 1st caller, press 2nd Call softkey, then select the type of call
and press .
•
Dial 2nd party number or select handset and press .
Then press Conf soft key to establish the conference.
3-party conference
•Press to open main menu. Select Services Call Forward.
•Select the line for which you want to set call forward.
•Then select the type of call forward.
•Set the status to enabled/disabled, fill in destination number and press .
Call forward
Call transfer
Attended transfer :
•Once in line with 1st caller, press 2nd Call softkey, then select the type of call and press
•Dial the second phone number or select handset.
Blind transfer:
•Once in line with1st caller, press Transfer softkey
•Dial the destination telephone number and press Transfer soft key.
• Press to access main menu.
• Select Status Network Status. Check IP address.
• Open a web browser on your computer. Enter http:// and the IP address in the address
bar and confirm. Default login is "userx"/0000, where "x" is your handset number.
Handset web interface
.
•When the call is answered, select Transfer from call options list to complete
the transfer.
OR
•Go to Menu Voicemail to check number of messages. Press Call softkey to
retrieve your messages.
•Press Save softkey
•Answering a waiting call : select Accept or Reject softkey.